The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Oxide‐Mediated Formation of Chemically Stable Tungsten–Liquid Metal Mixtures for Enhanced Thermal Interfaces
Abstract
Modern microelectronics and emerging technologies such as wearable devices and soft robotics require conformable and thermally conductive thermal interface materials to improve their performance and longevity. Gallium‐based liquid metals (LMs) are promising candidates for these applications yet are limited by their moderate thermal conductivity, difficulty in surface‐spreading, and pump‐out issues. Incorporation of metallic particles into the LM can address these problems, but observed alloying processes shift the LM melting point and lead to undesirable formation of additional surface roughness. Here, these problems are addressed by introducing a mixture of tungsten microparticles dispersed within a LM matrix (LM‐W) that exhibits two‐ to threefold enhanced thermal conductivity (62 ± 2.28 W m−1 K−1 for gallium and 57 ± 2.08 W m−1 K−1 for EGaInSn at a 40% filler volume mixing ratio) and liquid‐to‐paste transition for better surface application. It is shown that the formation of a nanometer‐scale LM oxide in oxygen‐rich environments allows highly nonwetting tungsten particles to mix into LMs. Using in situ imaging and particle dipping experimentation within a focused ion beam and scanning electron microscopy system, the oxide‐assisted mechanism behind this wetting process is revealed. Furthermore, since tungsten does not undergo room‐temperature alloying with gallium, it is shown that LM‐W remains a chemically stable mixture.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Thermal Interface Materials: Historical Perspective, Status, and Future Directions
Prasher, R. (2006) · Proceedings of the IEEE · doi:10.1109/jproc.2006.879796 · Cited by 927
Cited by
Eutectics: formation, properties, and applications
Yu, D., Xue, Z., & Mu, T. (2021) · Chemical Society Reviews · doi:10.1039/d1cs00404b · Cited by 351
Zhao, B., Bai, Z., Lv, H., Yan, Z., Du, Y., Guo, X., Zhang, J., Wu, L., Deng, J., Zhang, D. W., et al. (2023) · Nano-Micro Letters · doi:10.1007/s40820-023-01043-3 · Cited by 290
Metadata
- Authors
- Kong, W., Wang, Z., Wang, M., Manning, K. C., Uppal, A., Green, M. D., Wang, R. Y., & Rykaczewski, K.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2019-09-16
- Volume
- 31
- Issue
- 44
- Pages
- e1904309-e1904309
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2973353929
- Cited by
- 191
- References
- 1
- FWCI
- 6.08
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.