The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Dendrite‐Free Potassium Metal Anodes in a Carbonate Electrolyte
Open accessAbstract
Potassium (K) metal anodes suffer from a challenging problem of dendrite growth. Here, it is demonstrated that a tailored current collector will stabilize the metal plating–stripping behavior even with a conventional KPF 6‐carbonate electrolyte. A 3D copper current collector is functionalized with partially reduced graphene oxide to create a potassiophilic surface, the electrode being denoted as rGO@3D‐Cu. Potassiophilic versus potassiophobic experiments demonstrate that molten K fully wets rGO@3D‐Cu after 6 s, but does not wet unfunctionalized 3D‐Cu. Electrochemically, a unique synergy is achieved that is driven by interfacial tension and geometry: the adherent rGO underlayer promotes 2D layer‐by‐layer (Frank–van der Merwe) metal film growth at early stages of plating, while the tortuous 3D‐Cu electrode reduces the current density and geometrically frustrates dendrites. The rGO@3D‐Cu symmetric cells and half‐cells achieve state‐of‐the‐art plating and stripping performance. The symmetric rGO@3D‐Cu cells exhibit stable cycling at 0.1–2 mA cm−2, while baseline Cu prematurely fails when the current reaches 0.5 mA cm−2. The half‐cells cells of rGO@3D‐Cu (no K reservoir) are stable at 0.5 mA cm−2 for 10 000 min (100 cycles), and at 1 mA cm−2 for 5000 min. The baseline 3D‐Cu, planar rGO@Cu, and planar Cu foil fails after 5110, 3012, and 1410 min, respectively.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Electrolytes and Interphases in Li-Ion Batteries and Beyond
Xu, K. (2014) · Chemical Reviews · doi:10.1021/cr500003w · Cited by 5,566
A cost and resource analysis of sodium-ion batteries
Vaalma, C., Buchholz, D., Weil, M., & Passerini, S. (2018) · Nature Reviews Materials · doi:10.1038/natrevmats.2018.13 · Cited by 2,613
Reduction of graphene oxide via l -ascorbic acid
Zhang, J., Yang, H., Shen, G., Cheng, P., Zhang, J., & Guo, S. (2010) · Chem. Commun. · doi:10.1039/b917705a · Cited by 2,344
Cited by
Liu, W., Liu, P., & Mitlin, D. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202002297 · Cited by 687
Self-citationSolid electrolyte interphase (SEI) in potassium ion batteries
Wang, H., Zhai, D., & Kang, F. (2020) · Energy & Environmental Science · doi:10.1039/d0ee01638a · Cited by 314
Hao, H., Hutter, T., Boyce, B. L., Watt, J., Liu, P., & Mitlin, D. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00838 · Cited by 314
Self-citationNa-k liquid alloy: A review on wettability enhancement and ionic carrier selection mechanism
Li, X., Liu, J., Chen, C., Yang, J., Xu, Z., Wu, M., Wang, Y., & Karim, Z. (2021) · Chinese Chemical Letters · doi:10.1016/j.cclet.2020.09.018 · Cited by 12
Self-citation
Metadata
- Authors
- Liu, P., Wang, Y., Gu, Q., Nanda, J., Watt, J., & Mitlin, D.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2019-12-20
- Volume
- 32
- Issue
- 7
- Pages
- e1906735-e1906735
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2996698466
- Cited by
- 184
- References
- 4
- FWCI
- 8.37
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Dendrite‐Free Potassium Metal Anodes in a Carbonate Electrolyte. https://app.cochat.ai/papers/10.1002/adma.201906735
- The paper
- Liu, P., Wang, Y., Gu, Q., Nanda, J., Watt, J., & Mitlin, D. (2020). Dendrite‐Free Potassium Metal Anodes in a Carbonate Electrolyte. Advanced Materials. https://doi.org/10.1002/adma.201906735
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.