The DOI matches its Crossref record; 40 of the 40 references it cites were found in a registry or an index.
Highly Thermoconductive, Thermostable, and Super‐Flexible Film by Engineering 1D Rigid Rod‐Like Aramid Nanofiber/2D Boron Nitride Nanosheets
Open accessAbstract
Polymer‐based thermal management materials have many irreplaceable advantages not found in metals or ceramics, such as easy processing, low density, and excellent flexibility. However, their limited thermal conductivity and unsatisfactory resistance to elevated temperatures (<200 °C) still prevent effective heat dissipation during applications with high‐temperature conditions or powerful operation. Therefore, herein highly thermoconductive and thermostable polymer nanocomposite films prepared by engineering 1D aramid nanofiber (ANF) with worm‐like microscopic morphologies into rigid rod‐like structures with 2D boron nitride nanosheets (BNNS) are reported. With no coils or entanglements, the rigid polymer chain enables a well‐packed crystalline structure resulting in a 20‐fold (or greater) increase in axial thermal conductivity. Additionally, strong interfacial interactions between the weaved ANF rod and the stacked BNNS facilitate efficient heat flux through the 1D/2D configuration. Hence, unprecedented in‐plane thermal conductivities as high as 46.7 W m−1 K−1 can be achieved at only 30 wt% BNNS loading, a value of 137% greater than that of a worm‐like ANF/BNNS counterpart. Moreover, the thermally stable nanocomposite films with light weight (28.9 W m−1 K−1/10 3 (kg m−3)) and high strength (>100 MPa, 450 °C) enable effective thermal management for microelectrodes operating at temperatures beyond 200 °C.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Thermal conductivity of carbon nanotubes and their polymer nanocomposites: A review
Han, Z., & Fina, A. (2011) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.11.004 · Cited by 2,603
Thermal conductivity of polymer-based composites: Fundamentals and applications
Chen, H., Ginzburg, V. V., Yang, J., Yang, Y., Liu, W., Huang, Y., Du, L., & Chen, B. (2016) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2016.03.001 · Cited by 2,049
Yu, A., Ramesh, P., Sun, X., Bekyarova, E., Itkis, M. E., & Haddon, R. C. (2008) · Advanced Materials · doi:10.1002/adma.200800401 · Cited by 972
Polyethylene nanofibres with very high thermal conductivities
Shen, S., Henry, A., Tong, J., Zheng, R., & Chen, G. (2010) · Nature Nanotechnology · doi:10.1038/nnano.2010.27 · Cited by 926
Dispersions of Aramid Nanofibers: A New Nanoscale Building Block
Yang, M., Cao, K., Sui, L., Qi, Y., Zhu, J., Waas, A., Arruda, E. M., Kieffer, J., Thouless, M. D., & Kotov, N. A. (2011) · ACS Nano · doi:10.1021/nn2014003 · Cited by 852
Chen, J., Huang, X., Sun, B., & Jiang, P. (2019) · ACS Nano · doi:10.1021/acsnano.8b06290 · Cited by 768
Chen, J., Huang, X., Zhu, Y., & Jiang, P. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201604754 · Cited by 756
Habibi Khalaj, A., & Halgamuge, S. K. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.08.037 · Cited by 707
Huang, X., Zhi, C., Jiang, P., Golberg, D., Bando, Y., & Tanaka, T. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201201824 · Cited by 647
Han, J., Du, G., Gao, W., & Bai, H. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201900412 · Cited by 620
High thermal conductivity in amorphous polymer blends by engineered interchain interactions
Kim, G.-H., Lee, D., Shanker, A., Shao, L., Kwon, M. S., Gidley, D., Kim, J., & Pipe, K. P. (2015) · Nature Materials · doi:10.1038/nmat4141 · Cited by 593
Zeng, X., Sun, J., Yao, Y., Sun, R., Xu, J.-B., & Wong, C.-P. (2017) · ACS Nano · doi:10.1021/acsnano.7b02359 · Cited by 523
Highly Thermally Conductive Papers with Percolative Layered Boron Nitride Nanosheets
Zhu, H., Li, Y., Fang, Z., Xu, J., Cao, F., Wan, J., Preston, C., Yang, B., & Hu, L. (2014) · ACS Nano · doi:10.1021/nn500134m · Cited by 493
Bioinspired Modification of h-BN for High Thermal Conductive Composite Films with Aligned Structure
Shen, H., Guo, J., Wang, H., Zhao, N., & Xu, J. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am507416y · Cited by 491
Polymer/Boron Nitride Nanocomposite Materials for Superior Thermal Transport Performance
Song, W., Wang, P., Cao, L., Anderson, A., Meziani, M. J., Farr, A. J., & Sun, Y. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201201689 · Cited by 411
Zeng, X., Ye, L., Yu, S., Li, H., Sun, R., Xu, J., & Wong, C.-P. (2015) · Nanoscale · doi:10.1039/c5nr00228a · Cited by 286
Yao, Y., Zeng, X., Wang, F., Sun, R., Xu, J.-B., & Wong, C.-P. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b04187 · Cited by 279
Yang, X., Guo, Y., Han, Y., Li, Y., Ma, T., Chen, M., Kong, J., Zhu, J., & Gu, J. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.107070 · Cited by 275
Hao, M., Li, J., Park, S., Moura, S., & Dames, C. (2018) · Nature Energy · doi:10.1038/s41560-018-0243-8 · Cited by 274
Morishita, T., & Okamoto, H. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b08404 · Cited by 257
Molecular engineered conjugated polymer with high thermal conductivity
Xu, Y., Wang, X., Zhou, J., Song, B., Jiang, Z., Lee, E. M. Y., Huberman, S., Gleason, K. K., & Chen, G. (2018) · Science Advances · doi:10.1126/sciadv.aar3031 · Cited by 255
Xiao, Y.-J., Wang, W.-Y., Lin, T., Chen, X.-J., Zhang, Y.-T., Yang, J.-H., Wang, Y., & Zhou, Z.-W. (2016) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b12651 · Cited by 242
Wang, J., Liu, D., Li, Q., Chen, C., Chen, Z., Song, P., Hao, J., Li, Y., Fakhrhoseini, S., Naebe, M., et al. (2019) · ACS Nano · doi:10.1021/acsnano.9b02182 · Cited by 200
Self-citationTsai, M.-H., Tseng, I.-H., Chiang, J.-C., & Li, J.-J. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am501323m · Cited by 198
An ultrathin high-performance heat spreader fabricated with hydroxylated boron nitride nanosheets
Fu, L., Wang, T., Yu, J., Dai, W., Sun, H., Liu, Z., Sun, R., Jiang, N., Yu, A., & Lin, C.-T. (2017) · 2D Materials · doi:10.1088/2053-1583/aa636e · Cited by 185
Wu, K., Liao, P., Du, R., Zhang, Q., Chen, F., & Fu, Q. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta03642j · Cited by 159
Self-citationThermal Management of Electric Vehicle Battery Systems
Dinçer, İ., Hamut, H. S., & Javani, N. (2016) · Wiley eBooks · doi:10.1002/9781118900239 · Cited by 142
Thermal Management of Vehicle Cabins, External Surfaces, and Onboard Electronics: An Overview
Marshall, G. J., Mahony, C. P., Rhodes, M. J., Daniewicz, S. R., Tsolas, N., & Thompson, S. M. (2019) · Engineering · doi:10.1016/j.eng.2019.02.009 · Cited by 136
High thermal conductivity in electrostatically engineered amorphous polymers
Shanker, A., Li, C. W., Kim, G.-H., Gidley, D. W., Pipe, K. P., & Kim, J. (2017) · Science Advances · doi:10.1126/sciadv.1700342 · Cited by 135
Wang, Y., Xia, S., Li, H., & Wang, J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201903876 · Cited by 135
Self-citationFiber Reinforced Layered Dielectric Nanocomposite
Rahman, M. M., Puthirath, A. B., Adumbumkulath, A., Tsafack, T., Robatjazi, H., Barnes, M., Wang, Z., Kommandur, S., Susarla, S., Sajadi, S. M., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201900056 · Cited by 107
Transparent, High‐Thermal‐Conductivity Ultradrawn Polyethylene/Graphene Nanocomposite Films
Pan, X., Shen, L., Schenning, A. P. H. J., & Bastiaansen, C. W. M. (2019) · Advanced Materials · doi:10.1002/adma.201904348 · Cited by 107
High temperature thermally conductive nanocomposite textile by “green” electrospinning
Wang, J., Li, Q., Liu, D., Chen, C., Chen, Z., Hao, J., Li, Y., Zhang, J., Naebe, M., & Lei, W. (2018) · Nanoscale · doi:10.1039/c8nr05167d · Cited by 102
Self-citationKwon, O. H., Ha, T., Kim, D., Kim, B. G., Kim, Y. S., Shin, T. J., Koh, W., Lim, H. S., & Yoo, Y. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b12075 · Cited by 98
Toward Lithium Ion Batteries with Enhanced Thermal Conductivity
Koo, B., Goli, P., Sumant, A. V., Claro, P. C. D. S., Rajh, T., Johnson, C. S., Balandin, A. A., & Shevchenko, E. V. (2014) · ACS Nano · doi:10.1021/nn502212b · Cited by 70
High temperature thermal management with boron nitride nanosheets
Wang, Y., Xu, L., Yang, Z., Xie, H., Jiang, P., Dai, J., Luo, W., Yao, Y., Hitz, E., Yang, R., et al. (2018) · Nanoscale · doi:10.1039/c7nr07058f · Cited by 66
Thermally Conductive, Electrical Insulating, Optically Transparent Bi-Layer Nanopaper
Zhou, L., Yang, Z., Luo, W. H., Han, X., Jang, S., Dai, J., Yang, B., & Hu, L. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b09471 · Cited by 63
Song, N., Pan, H., Liang, X., Cao, D., Shi, L., & Ding, P. (2018) · Journal of Materials Chemistry C · doi:10.1039/c8tc01277f · Cited by 47
Dri, F. L., Shang, S., Hector, L. G., Saxe, P. W., Liu, Z., Moon, R. J., & Zavattieri, P. D. (2014) · Modelling and Simulation in Materials Science and Engineering · doi:10.1088/0965-0393/22/8/085012 · Cited by 36
Kipper, A. C., & da Silva, L. B. (2018) · Physica B Condensed Matter · doi:10.1016/j.physb.2018.12.026 · Cited by 21
Cited by
Ma, Z., Kang, S., Ma, J., Shao, L., Zhang, Y., Liu, C., Wei, A., Xiang, X., Wei, L., & Gu, J. (2020) · ACS Nano · doi:10.1021/acsnano.0c02401 · Cited by 884
Liu, D., Lei, C., Wu, K., & Fu, Q. (2020) · ACS Nano · doi:10.1021/acsnano.0c06680 · Cited by 271
Self-citation
Metadata
- Authors
- Wu, K., Wang, J., Liu, D., Lei, C., Liu, D., Lei, W., & Fu, Q.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2020-01-16
- Volume
- 32
- Issue
- 8
- Pages
- e1906939-e1906939
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W3000744628
- Cited by
- 400
- References
- 40
- FWCI
- 21.72
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.