The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Combining Efficiency and Stability in Mixed Tin–Lead Perovskite Solar Cells by Capping Grains with an Ultrathin 2D Layer
Open accessAbstract
The development of narrow‐bandgap (Eg ≈ 1.2 eV) mixed tin–lead (Sn–Pb) halide perovskites enables all‐perovskite tandem solar cells. Whereas pure‐lead halide perovskite solar cells (PSCs) have advanced simultaneously in efficiency and stability, achieving this crucial combination remains a challenge in Sn–Pb PSCs. Here, Sn–Pb perovskite grains are anchored with ultrathin layered perovskites to overcome the efficiency‐stability tradeoff. Defect passivation is achieved both on the perovskite film surface and at grain boundaries, an approach implemented by directly introducing phenethylammonium ligands in the antisolvent. This improves device operational stability and also avoids the excess formation of layered perovskites that would otherwise hinder charge transport. Sn–Pb PSCs with fill factors of 79% and a certified power conversion efficiency (PCE) of 18.95% are reported—among the highest for Sn–Pb PSCs. Using this approach, a 200‐fold enhancement in device operating lifetime is achieved relative to the nonpassivated Sn–Pb PSCs under full AM1.5G illumination, and a 200 h diurnal operating time without efficiency drop is achieved under filtered AM1.5G illumination.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Efficient, stable and scalable perovskite solar cells using poly(3-hexylthiophene)
Jung, E. H., Jeon, N. J., Park, E. Y., Moon, C. S., Shin, T. J., Yang, T.-Y., Noh, J. H., & Seo, J. (2019) · Nature · doi:10.1038/s41586-019-1036-3 · Cited by 2,305
Cited by
Li, X., Hoffman, J. M., & Kanatzidis, M. G. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01006 · Cited by 1,085
All-perovskite tandem solar cells with improved grain surface passivation
Lin, R., Xu, J., Wei, M., Wang, Y., Qin, Z., Liu, Z., Wu, J., Xiao, K., Chen, B., Park, S. M., et al. (2022) · Nature · doi:10.1038/s41586-021-04372-8 · Cited by 1,085
Self-citationXiao, K., Lin, R., Han, Q., Hou, Y., Qin, Z., Nguyen, H. T., Wen, J., Wei, M., Yeddu, V., Saidaminov, M. I., et al. (2020) · Nature Energy · doi:10.1038/s41560-020-00705-5 · Cited by 768
Self-citationAll-perovskite tandem solar cells with 3D/3D bilayer perovskite heterojunction
Lin, R., Wang, Y., Lu, Q., Tang, B., Li, J., Gao, H., Gao, Y., Li, H., Ding, C., Wen, J., et al. (2023) · Nature · doi:10.1038/s41586-023-06278-z · Cited by 613
Self-citationOptimized carrier extraction at interfaces for 23.6% efficient tin–lead perovskite solar cells
Hu, S., Otsuka, K., Murdey, R., Nakamura, T., Truong, M. A., Yamada, T., Handa, T., Matsuda, K., Nakano, K., Sato, A., et al. (2022) · Energy & Environmental Science · doi:10.1039/d2ee00288d · Cited by 467
Metadata
- Authors
- Wei, M., Xiao, K., Walters, G., Lin, R., Zhao, Y., Saidaminov, M. I., Todorović, P., Johnston, A., Huang, Z., Chen, H., Li, A., Zhu, J., Yang, Z., Wang, Y., Proppe, A. H., Kelley, S. O., Hou, Y., Voznyy, O., Tan, H., & Sargent, E. H.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2020-02-07
- Volume
- 32
- Issue
- 12
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W4232076031
- Cited by
- 203
- References
- 1
- FWCI
- 12.15
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Combining Efficiency and Stability in Mixed Tin–Lead Perovskite Solar Cells by Capping Grains with an Ultrathin 2D Layer. https://app.cochat.ai/papers/10.1002/adma.201907058
- The paper
- Wei, M., Xiao, K., Walters, G., Lin, R., Zhao, Y., Saidaminov, M. I., Todorović, P., Johnston, A., Huang, Z., Chen, H., Li, A., Zhu, J., Yang, Z., Wang, Y., Proppe, A. H., Kelley, S. O., Hou, Y., Voznyy, O., Tan, H., & Sargent, E. H. (2020). Combining Efficiency and Stability in Mixed Tin–Lead Perovskite Solar Cells by Capping Grains with an Ultrathin 2D Layer. Advanced Materials. https://doi.org/10.1002/adma.201907058
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.