The DOI matches its Crossref record; 111 of the 111 references it cites were found in a registry or an index.
Phase Engineering of High‐Entropy Alloys
Abstract
High‐entropy alloys (HEAs) are based on five or more principal elements with equal or nearly equal molar fractions and possess many significant advantages over traditional alloys, including high strength and hardness, excellent corrosion resistance, outstanding thermal stability, and irradiation resistance. Phase structure plays a vital role in determining the property of HEAs. For further enhancing the performance of HEAs in various application fields, a controllable synthesis with desired phases is required. In this review, the diverse phase structures of HEAs and the related properties are first introduced. Then, alternative tuning strategies to promote the desired phase structure of HEAs are focused upon. Property adjusting of phase‐engineered HEAs is also discussed in depth. Lastly, some insights into the challenges and future prospects in this rapidly emerging research field are provided.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yeh, J. ‐., Chen, S. ‐., Lin, S. ‐., Gan, J. ‐., Chin, T. ‐., Shun, T. ‐., Tsau, C. ‐., & Chang, S. ‐. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200300567 · Cited by 15,281
Microstructural development in equiatomic multicomponent alloys
Cantor, B., Chang, I. T. H., Knight, P., & Vincent, A. J. B. (2004) · Materials Science and Engineering: A · doi:10.1016/j.msea.2003.10.257 · Cited by 10,130
A critical review of high entropy alloys and related concepts
Miracle, D. B., & Senkov, O. N. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.08.081 · Cited by 8,973
Microstructures and properties of high-entropy alloys
Zhang, Y., Zuo, T. T., Tang, Z., Gao, M. C., Dahmen, K. A., Liaw, P. K., & Lu, Z. P. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2013.10.001 · Cited by 7,128
Stabilization of metallic supercooled liquid and bulk amorphous alloys
Inoue, A. (2000) · Acta Materialia · doi:10.1016/s1359-6454(99)00300-6 · Cited by 5,887
A fracture-resistant high-entropy alloy for cryogenic applications
Gludovatz, B., Hohenwarter, A., Catoor, D., Chang, E. H., George, E. P., & Ritchie, R. O. (2014) · Science · doi:10.1126/science.1254581 · Cited by 5,714
Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off
Li, Z., Pradeep, K. G., Deng, Y., Raabe, D., & Tasan, C. C. (2016) · Nature · doi:10.1038/nature17981 · Cited by 4,071
The conflicts between strength and toughness
Ritchie, R. O. (2011) · Nature Materials · doi:10.1038/nmat3115 · Cited by 3,989
Rost, C. M., Sachet, E., Borman, T., Moballegh, A., Dickey, E. C., Hou, D., Jones, J. L., Curtarolo, S., & Maria, J.-P. (2015) · Nature Communications · doi:10.1038/ncomms9485 · Cited by 3,525
Solid‐Solution Phase Formation Rules for Multi‐component Alloys
Zhang, Y., Zhou, Y. J., Lin, J. P., Chen, G. L., & Liaw, P. K. (2008) · Advanced Engineering Materials · doi:10.1002/adem.200700240 · Cited by 3,466
Otto, F., Dlouhý, A., Somsen, C., Bei, H., Eggeler, G., & George, E. P. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.06.018 · Cited by 3,352
Refractory high-entropy alloys
Senkov, O. N., Wilks, G. B., Miracle, D. B., Chuang, C. P., & Liaw, P. K. (2010) · Intermetallics · doi:10.1016/j.intermet.2010.05.014 · Cited by 2,950
Prediction of high-entropy stabilized solid-solution in multi-component alloys
Yang, X., & Zhang, Y. (2012) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2011.11.021 · Cited by 2,920
Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys
Guo, S., Ng, C., Lu, J., & Liu, C. T. (2011) · Journal of Applied Physics · doi:10.1063/1.3587228 · Cited by 2,911
Wang, W. H., Dong, C., & Shek, C. H. (2004) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2004.03.001 · Cited by 2,803
A highly processable metallic glass: Zr41.2Ti13.8Cu12.5Ni10.0Be22.5
Peker, A., & Johnson, W. L. (1993) · Applied Physics Letters · doi:10.1063/1.110520 · Cited by 2,446
Sluggish diffusion in Co–Cr–Fe–Mn–Ni high-entropy alloys
Tsai, K.-Y., Tsai, M.-H., & Yeh, J.-W. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.04.058 · Cited by 2,366
Carbothermal shock synthesis of high-entropy-alloy nanoparticles
Yao, Y., Huang, Z., Xie, P., Lacey, S. D., Jacob, R. J., Xie, H., Chen, F., Nie, A., Pu, T., Rehwoldt, M., et al. (2018) · Science · doi:10.1126/science.aan5412 · Cited by 2,101
Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures
Gludovatz, B., Hohenwarter, A., Thurston, K. V. S., Bei, H., Wu, Z., George, E. P., & Ritchie, R. O. (2016) · Nature Communications · doi:10.1038/ncomms10602 · Cited by 1,930
Microstructure and room temperature properties of a high-entropy TaNbHfZrTi alloy
Senkov, O. N., Scott, J. M., Senkova, S. V., Miracle, D. B., & Woodward, C. F. (2011) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2011.02.171 · Cited by 1,856
A Promising New Class of High-Temperature Alloys: Eutectic High-Entropy Alloys
Lu, Y., Dong, Y., Guo, S., Jiang, L., Kang, H., Wang, T., Wen, B., Wang, Z., Jie, J., Cao, Z., et al. (2014) · Scientific Reports · doi:10.1038/srep06200 · Cited by 1,737
Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys
Yang, T., Zhao, Y. L., Tong, Y., Jiao, Z. B., Wei, J., Cai, J. X., Han, X. D., Chen, D., Hu, A., Kai, J. J., et al. (2018) · Science · doi:10.1126/science.aas8815 · Cited by 1,684
Tuning element distribution, structure and properties by composition in high-entropy alloys
Ding, Q., Zhang, Y., Chen, X., Fu, X., Chen, D., Chen, S., Gu, L., Wei, F., Bei, H., Gao, Y., et al. (2019) · Nature · doi:10.1038/s41586-019-1617-1 · Cited by 1,614
He, J. Y., Liu, W. H., Wang, H., Wu, Y., Liu, X. J., Nieh, T. G., & Lu, Z. P. (2014) · Acta Materialia · doi:10.1016/j.actamat.2013.09.037 · Cited by 1,529
Wang, W.-R., Wang, W.-L., Wang, S.-C., Tsai, Y.-C., Lai, C.-H., & Yeh, J.-W. (2012) · Intermetallics · doi:10.1016/j.intermet.2012.03.005 · Cited by 1,517
Microstructure and wear behavior of AlxCo1.5CrFeNi1.5Tiy high-entropy alloys
Chuang, M.-H., Tsai, M.-H., Wang, W.-R., Lin, S.-J., & Yeh, J.-W. (2011) · Acta Materialia · doi:10.1016/j.actamat.2011.06.041 · Cited by 1,481
Relative effects of enthalpy and entropy on the phase stability of equiatomic high-entropy alloys
Otto, F., Yang, Y., Bei, H., & George, E. P. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.01.042 · Cited by 1,445
Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation
Jiang, S., Wang, H., Wu, Y., Liu, X., Chen, H., Yao, M., Gault, B., Ponge, D., Raabe, D., Hirata, A., et al. (2017) · Nature · doi:10.1038/nature22032 · Cited by 1,441
Tensile properties of high- and medium-entropy alloys
Gali, A., & George, E. P. (2013) · Intermetallics · doi:10.1016/j.intermet.2013.03.018 · Cited by 1,194
Science and technology in high-entropy alloys
Zhang, W., Liaw, P. K., & Zhang, Y. (2018) · Science China Materials · doi:10.1007/s40843-017-9195-8 · Cited by 1,131
Ductile CoCrFeNiMox high entropy alloys strengthened by hard intermetallic phases
Liu, W. H., Lu, Z. P., He, J. Y., Luan, J. H., Wang, Z. J., Liu, B., Liu, Y., Chen, M. W., & Liu, C. T. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.06.063 · Cited by 1,064
High-entropy alloys: a critical assessment of their founding principles and future prospects
Pickering, E. J., & Jones, N. G. (2016) · International Materials Reviews · doi:10.1080/09506608.2016.1180020 · Cited by 1,062
Shi, P., Ren, W., Zheng, T., Ren, Z., Hou, X., Peng, J., Hu, P., Gao, Y., Zhong, Y., & Liaw, P. K. (2019) · Nature Communications · doi:10.1038/s41467-019-08460-2 · Cited by 954
Maximum entropy production principle in physics, chemistry and biology
Martyushev, L. M., & Seleznev, V. D. (2006) · Physics Reports · doi:10.1016/j.physrep.2005.12.001 · Cited by 943
Shi, Y., Yang, B., Xie, X., Brechtl, J., Dahmen, K. A., & Liaw, P. K. (2017) · Corrosion Science · doi:10.1016/j.corsci.2017.02.019 · Cited by 887
Decomposition in multi-component AlCoCrCuFeNi high-entropy alloy
Singh, S., Wanderka, N., Murty, B. S., Glatzel, U., & Banhart, J. (2010) · Acta Materialia · doi:10.1016/j.actamat.2010.09.023 · Cited by 872
Fatigue behavior of Al0.5CoCrCuFeNi high entropy alloys
Hemphill, M. A., Yuan, T., Wang, G. Y., Yeh, J. W., Tsai, C. W., Chuang, A., & Liaw, P. K. (2012) · Acta Materialia · doi:10.1016/j.actamat.2012.06.046 · Cited by 811
More than entropy in high-entropy alloys: Forming solid solutions or amorphous phase
Guo, S., Hu, Q., Ng, C., & Liu, C. T. (2013) · Intermetallics · doi:10.1016/j.intermet.2013.05.002 · Cited by 800
Li, Z., Tasan, C. C., Pradeep, K. G., & Raabe, D. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.03.069 · Cited by 757
Santodonato, L. J., Zhang, Y., Feygenson, M., Parish, C. M., Gao, M. C., Weber, R. J. K., Neuefeind, J. C., Tang, Z., & Liaw, P. K. (2015) · Nature Communications · doi:10.1038/ncomms6964 · Cited by 708
Yao, M. J., Pradeep, K. G., Tasan, C. C., & Raabe, D. (2014) · Scripta Materialia · doi:10.1016/j.scriptamat.2013.09.030 · Cited by 685
Outstanding radiation resistance of tungsten-based high-entropy alloys
El-Atwani, O., Li, N., Li, M., Devaraj, A., Baldwin, J. K. S., Schneider, M. M., Sobieraj, D., Wróbel, J. S., Nguyen-Manh, D., Maloy, S. A., et al. (2019) · Science Advances · doi:10.1126/sciadv.aav2002 · Cited by 658
Youssef, K. M., Zaddach, A. J., Niu, C., Irving, D. L., & Koch, C. C. (2015) · Materials Research Letters · doi:10.1080/21663831.2014.985855 · Cited by 645
Enhanced mechanical properties of HfMoTaTiZr and HfMoNbTaTiZr refractory high-entropy alloys
Juan, C.-C., Tsai, M.-H., Tsai, C.-W., Lin, C.-M., Wang, W.-R., Yang, C.-C., Chen, S.-K., Lin, S.-J., & Yeh, J.-W. (2015) · Intermetallics · doi:10.1016/j.intermet.2015.03.013 · Cited by 633
On the elemental effect of AlCoCrCuFeNi high-entropy alloy system
Tung, C.-C., Yeh, J.-W., Shun, T.-T., Chen, S.-K., Huang, Y.-S., & Chen, H.-C. (2007) · Materials Letters · doi:10.1016/j.matlet.2006.03.140 · Cited by 629
Lattice distortion in a strong and ductile refractory high-entropy alloy
Lee, C., Song, G., Gao, M. C., Feng, R., Chen, P., Brechtl, J., Chen, Y., An, K., Guo, W., Poplawsky, J. D., et al. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.08.053 · Cited by 622
Wu, Y. D., Cai, Y. H., Wang, T., Si, J. J., Zhu, J., Wang, Y. D., & Hui, X. D. (2014) · Materials Letters · doi:10.1016/j.matlet.2014.05.134 · Cited by 610
Li, R., Niu, P., Yuan, T., Cao, P., Chen, C., & Zhou, K. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.02.298 · Cited by 572
Ma, D., Grabowski, B., Körmann, F., Neugebauer, J., & Raabe, D. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.08.050 · Cited by 556
Glasscott, M. W., Pendergast, A. D., Goines, S., Bishop, A. R., Hoang, A. T., Renault, C., & Dick, J. E. (2019) · Nature Communications · doi:10.1038/s41467-019-10303-z · Cited by 551
Electronic and thermodynamic criteria for the occurrence of high entropy alloys in metallic systems
Poletti, M. G., & Battezzati, L. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.04.033 · Cited by 501
Stacking fault energies of face-centered cubic concentrated solid solution alloys
Zhao, S., Stocks, G. M., & Zhang, Y. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.05.001 · Cited by 495
Chen, R., Qin, G., Zheng, H., Wang, L., Su, Y., Chiu, Y., Ding, H., Guo, J., & Fu, H. (2018) · Acta Materialia · doi:10.1016/j.actamat.2017.10.058 · Cited by 469
Polyelemental nanoparticle libraries
Chen, P.-C., Liu, X., Hedrick, J. L., Xie, Z., Wang, S., Lin, Q.-Y., Hersam, M. C., Dravid, V. P., & Mirkin, C. A. (2016) · Science · doi:10.1126/science.aaf8402 · Cited by 462
Fatigue behavior of a wrought Al0.5CoCrCuFeNi two-phase high-entropy alloy
Tang, Z., Yuan, T., Tsai, C.-W., Yeh, J.-W., Lundin, C. D., & Liaw, P. K. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.07.004 · Cited by 450
Criterion for Sigma Phase Formation in Cr- and V-Containing High-Entropy Alloys
Tsai, M.-H., Tsai, K.-Y., Tsai, C.-W., Lee, C., Juan, C.-C., & Yeh, J.-W. (2013) · Materials Research Letters · doi:10.1080/21663831.2013.831382 · Cited by 426
Guidelines in predicting phase formation of high-entropy alloys
Zhang, Y., Lu, Z. P., Ma, S. G., Liaw, P. K., Tang, Z., Cheng, Y. Q., & Gao, M. C. (2014) · MRS Communications · doi:10.1557/mrc.2014.11 · Cited by 401
Magnetically-driven phase transformation strengthening in high entropy alloys
Niu, C., LaRosa, C. R., Miao, J., Mills, M. J., & Ghazisaeidi, M. (2018) · Nature Communications · doi:10.1038/s41467-018-03846-0 · Cited by 393
Phase separation in equiatomic AlCoCrFeNi high-entropy alloy
Manzoni, A., Daoud, H., Völkl, R., Glatzel, U., & Wanderka, N. (2013) · Ultramicroscopy · doi:10.1016/j.ultramic.2012.12.015 · Cited by 385
Phase selection rules for cast high entropy alloys: An overview
Guo, S. (2015) · Materials Science and Technology · doi:10.1179/1743284715y.0000000018 · Cited by 375
Takeuchi, A., Amiya, K., Wada, T., Yubuta, K., & Zhang, W. (2014) · JOM · doi:10.1007/s11837-014-1085-x · Cited by 367
High strain-rate compressive deformation behavior of the Al0.1CrFeCoNi high entropy alloy
Kumar, N., Ying, Q., Nie, X., Mishra, R. S., Tang, Z., Liaw, P. K., Brennan, R. E., Doherty, K. J., & Cho, K. C. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.07.161 · Cited by 339
An assessment of the lattice strain in the CrMnFeCoNi high-entropy alloy
Owen, L. R., Pickering, E. J., Playford, H. Y., Stone, H. J., Tucker, M. G., & Jones, N. G. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.09.032 · Cited by 338
Effects of Al and Si addition on the structure and properties of CoFeNi equal atomic ratio alloy
Zuo, T. T., Li, R. B., Ren, X. J., & Zhang, Y. (2014) · Journal of Magnetism and Magnetic Materials · doi:10.1016/j.jmmm.2014.07.023 · Cited by 337
Entropy-driven phase stability and slow diffusion kinetics in an Al0.5CoCrCuFeNi high entropy alloy
Ng, C., Guo, S., Luan, J., Shi, S., & Liu, C. T. (2012) · Intermetallics · doi:10.1016/j.intermet.2012.07.001 · Cited by 335
Dong, Y., Lu, Y., Jiang, L., Wang, T., & Li, T. (2014) · Intermetallics · doi:10.1016/j.intermet.2014.04.001 · Cited by 330
High pressure synthesis of a hexagonal close-packed phase of the high-entropy alloy CrMnFeCoNi
Tracy, C. L., Park, S., Rittman, D. R., Zinkle, S. J., Bei, H., Lang, M., Ewing, R. C., & Mao, W. L. (2017) · Nature Communications · doi:10.1038/ncomms15634 · Cited by 329
Polymorphism in a high-entropy alloy
Zhang, F., Wu, Y., Lou, H., Zeng, Z., Prakapenka, V. B., Greenberg, E., Ren, Y., Yan, J., Okasinski, J. S., Liu, X., et al. (2017) · Nature Communications · doi:10.1038/ncomms15687 · Cited by 329
A total-synthesis framework for the construction of high-order colloidal hybrid nanoparticles
Buck, M. R., Bondi, J. F., & Schaak, R. E. (2012) · Nature Chemistry · doi:10.1038/nchem.1195 · Cited by 325
Schuh, B., Völker, B., Todt, J., Schell, N., Perrière, L., Li, J., Couzinié, J. P., & Hohenwarter, A. (2018) · Acta Materialia · doi:10.1016/j.actamat.2017.09.035 · Cited by 315
Zhang, Y. H., Zhuang, Y., Hu, A., Kai, J. J., & Liu, C. T. (2017) · Scripta Materialia · doi:10.1016/j.scriptamat.2016.11.014 · Cited by 313
Feuerbacher, M., Heidelmann, M., & Thomas, C. (2015) · Materials Research Letters · doi:10.1080/21663831.2014.951493 · Cited by 308
Wang, R., Zhang, K., Davies, C., & Wu, X. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.10.138 · Cited by 306
Yang, X., Chen, S. Y., Cotton, J. D., & Zhang, Y. (2014) · JOM · doi:10.1007/s11837-014-1059-z · Cited by 293
Bidirectional Transformation Enables Hierarchical Nanolaminate Dual‐Phase High‐Entropy Alloys
Lu, W., Liebscher, C. H., Dehm, G., Raabe, D., & Li, Z. (2018) · Advanced Materials · doi:10.1002/adma.201804727 · Cited by 288
Understanding phase stability of Al-Co-Cr-Fe-Ni high entropy alloys
Zhang, C., Zhang, F., Diao, H., Gao, M. C., Tang, Z., Poplawsky, J. D., & Liaw, P. K. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.07.073 · Cited by 285
Lilensten, L., Couzinié, J.-P., Bourgon, J., Perrière, L., Dirras, G., Prima, F., & Guillot, I. (2017) · Materials Research Letters · doi:10.1080/21663831.2016.1221861 · Cited by 268
Interface and heterostructure design in polyelemental nanoparticles
Chen, P.-C., Liu, M., Du, J. S., Meckes, B., Wang, S., Lin, H., Dravid, V. P., Wolverton, C., & Mirkin, C. A. (2019) · Science · doi:10.1126/science.aav4302 · Cited by 260
Processing, Microstructure and Mechanical Properties of the CrMnFeCoNi High-Entropy Alloy
Gludovatz, B., George, E. P., & Ritchie, R. O. (2015) · JOM · doi:10.1007/s11837-015-1589-z · Cited by 254
Rare-earth high-entropy alloys with giant magnetocaloric effect
Yuan, Y., Wu, Y., Tong, X., Zhang, H., Wang, H., Liu, X. J., Ma, L., Suo, H. L., & Lu, Z. P. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.12.021 · Cited by 251
Cryogenic-deformation-induced phase transformation in an FeCoCrNi high-entropy alloy
Lin, Q., Liu, J., An, X., Wang, H., Zhang, Y., & Liao, X. (2018) · Materials Research Letters · doi:10.1080/21663831.2018.1434250 · Cited by 251
Wang, M., Li, Z., & Raabe, D. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.01.036 · Cited by 242
Li, P., Wang, A., & Liu, C. T. (2017) · Intermetallics · doi:10.1016/j.intermet.2017.04.007 · Cited by 225
Wang, Z., Qiu, W., Yang, Y., & Liu, C. T. (2015) · Intermetallics · doi:10.1016/j.intermet.2015.04.014 · Cited by 211
Effect of aging treatment on microstructure and properties of high-entropy Cu0.5CoCrFeNi alloy
Lin, C.-M., Tsai, H.-L., & Bor, H.-Y. (2010) · Intermetallics · doi:10.1016/j.intermet.2010.03.030 · Cited by 199
Microstructure and properties of novel CoCrFeNiTax eutectic high-entropy alloys
Huo, W., Zhou, H., Fang, F., Zhou, X., Xie, Z., & Jiang, J. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.11.075 · Cited by 190
3D ink-extrusion additive manufacturing of CoCrFeNi high-entropy alloy micro-lattices
Kenel, C., Casati, N. P. M., & Dunand, D. C. (2019) · Nature Communications · doi:10.1038/s41467-019-08763-4 · Cited by 183
Second phase formation in the CoCrFeNiMn high entropy alloy after recrystallization annealing
Stepanov, N., Shaysultanov, D. G., Ozerov, M. S., Zherebtsov, S. V., & Salishchev, G. A. (2016) · Materials Letters · doi:10.1016/j.matlet.2016.08.088 · Cited by 171
Phase stability and microstructures of high entropy alloys ion irradiated to high doses
Xia, S., Gao, M. C., Yang, T., Liaw, P. K., & Zhang, Y. (2016) · Journal of Nuclear Materials · doi:10.1016/j.jnucmat.2016.08.017 · Cited by 164
Mechanism of magnetic transition in FeCrCoNi-based high entropy alloys
Huang, S., Li, W., Li, X., Schönecker, S., Bergqvist, L., Holmström, E., Varga, L. K., & Vitos, L. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.04.053 · Cited by 152
Zhang, Q., Xu, H., Tan, X., Hou, X. L., Wu, S., Tan, G. S., & Yu, L. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.09.271 · Cited by 151
Borkar, T., Chaudhary, V., Gwalani, B., Choudhuri, D., Mikler, C. V., Soni, V., Alam, T., Ramanujan, R. V., & Banerjee, R. (2017) · Advanced Engineering Materials · doi:10.1002/adem.201700048 · Cited by 148
Design of High-Entropy Alloy: A Perspective from Nonideal Mixing
He, Q., Ding, Z., Ye, Y. F., & Yang, Y. G. (2017) · JOM · doi:10.1007/s11837-017-2452-1 · Cited by 127
Towards a greater understanding of serrated flows in an Al-containing high-entropy-based alloy
Brechtl, J. M., Chen, S. Y., Xie, X., Ren, Y., Qiao, J., Liaw, P. K., & Zinkle, S. J. (2018) · International Journal of Plasticity · doi:10.1016/j.ijplas.2018.11.011 · Cited by 122
A single-phase bcc high-entropy alloy in the refractory Zr-Nb-Ti-V-Hf system
Feuerbacher, M., Lienig, T., & Thomas, C. (2018) · Scripta Materialia · doi:10.1016/j.scriptamat.2018.04.009 · Cited by 113
Solid solutioning in equiatomic alloys: Limit set by topological instability
Guo, S. L., Ng, C., Wang, Z., & Liu, C. T. (2013) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.08.213 · Cited by 110
Cooling rate effect on microstructure and mechanical properties of Al x CoCrFeNi high entropy alloys
Lv, Y., Hu, R., Yao, Z., Chen, J., Xu, D., Liu, Y., & Fan, X. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.07.008 · Cited by 109
Jung, C., Kang, K., Marshal, A., Pradeep, K. G., Seol, J. B., Lee, H. M., & Choi, P. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.04.007 · Cited by 98
Comments Concerning Some Features of Phase Diagrams and Phase Transformations
Massalski, T. B. (2010) · MATERIALS TRANSACTIONS · doi:10.2320/matertrans.m2010012 · Cited by 95
Chanda, B., & Das, J. (2017) · Advanced Engineering Materials · doi:10.1002/adem.201700908 · Cited by 95
Mishra, R. K., & Shahi, R. R. (2017) · Journal of Magnetism and Magnetic Materials · doi:10.1016/j.jmmm.2017.06.124 · Cited by 92
Stability and structure prediction of cubic phase in as cast high entropy alloys
Nong, Z., Zhu, J., Cao, Y., Yang, X., Lai, Z., & Liu, Y. (2013) · Materials Science and Technology · doi:10.1179/1743284713y.0000000368 · Cited by 69
Giwa, A. M., Liaw, P. K., Dahmen, K. A., & Greer, J. R. (2016) · Extreme Mechanics Letters · doi:10.1016/j.eml.2016.04.013 · Cited by 68
Lightweight AlCrTiV high-entropy alloys with dual-phase microstructure via microalloying
Huang, X., Miao, J., & Luo, A. A. (2018) · Journal of Materials Science · doi:10.1007/s10853-018-2970-4 · Cited by 65
Kumar, A., Swarnakar, A. K., & Chopkar, M. (2018) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-018-3409-4 · Cited by 55
Phase stability and magnetic behavior of FeCrCoNiGe high-entropy alloy
Huang, S., Vida, Á., Molnár, D., Kádas, K., Varga, L. K., Holmström, E., & Vitos, L. (2015) · Applied Physics Letters · doi:10.1063/1.4938398 · Cited by 49
Abundant polymorphic transitions in the Al0.6CoCrFeNi high-entropy alloy
Wang, L., Zhang, F., Nie, Z., Wang, L., Wang, F., Wang, B., Zhou, S., Xue, Y., Cheng, B., Lou, H., et al. (2018) · Materials Today Physics · doi:10.1016/j.mtphys.2018.12.002 · Cited by 45
Irreversible phase transformation in a CoCrFeMnNi high entropy alloy under hydrostatic compression
Huang, E., Lin, C., Jain, J., Shieh, S. R., Wang, C., Chuang, Y., Liao, Y., Zhang, D., Huang, T., Lam, T., et al. (2017) · Materials Today Communications · doi:10.1016/j.mtcomm.2017.12.001 · Cited by 44
Li, C., Li, Q., Li, M., Chang, C., Li, H., Dong, Y., & Sun, Y. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.03.375 · Cited by 44
Kumar, A., Dhekne, P. P., Swarnakar, A. K., & Chopkar, M. (2018) · Materials Research Express · doi:10.1088/2053-1591/aaed63 · Cited by 24
Pressure-induced ordering phase transition in high-entropy alloy
Ma, Y., Fan, J., Zhang, L., Zhang, M., Cui, P., Dong, W., Yu, P., Li, Y., Liaw, P. K., & Li, G. (2018) · Intermetallics · doi:10.1016/j.intermet.2018.10.003 · Cited by 13
Cited by
High-entropy ceramics: Present status, challenges, and a look forward
Xiang, H., Xing, Y., Dai, F.-Z., Wang, H., Su, L., Miao, L., Zhang, G., Wang, Y., Qi, X., Yao, L., et al. (2021) · Journal of Advanced Ceramics · doi:10.1007/s40145-021-0477-y · Cited by 1,109
High-entropy materials for catalysis: A new frontier
Sun, Y., & Dai, S. (2021) · Science Advances · doi:10.1126/sciadv.abg1600 · Cited by 942
High-entropy alloys in electrocatalysis: from fundamentals to applications
Ren, J.-T., Chen, L., Wang, H.-Y., & Yuan, Z.-Y. (2023) · Chemical Society Reviews · doi:10.1039/d3cs00557g · Cited by 551
Multi‐Sites Electrocatalysis in High‐Entropy Alloys
Li, H., Lai, J., Li, Z., & Wang, L. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202106715 · Cited by 494
Subnanometer high-entropy alloy nanowires enable remarkable hydrogen oxidation catalysis
Zhan, C., Xu, Y., Bu, L., Zhu, H., Feng, Y., Yang, T., Zhang, Y., Yang, Z., Huang, B., Shao, Q., et al. (2021) · Nature Communications · doi:10.1038/s41467-021-26425-2 · Cited by 486
Metadata
- Authors
- Chang, X., Zeng, M., Liu, K., & Fu, L.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2020-02-26
- Volume
- 32
- Issue
- 14
- Pages
- e1907226-e1907226
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W3007409912
- Cited by
- 464
- References
- 111
- FWCI
- 17.26
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.