The DOI matches its Crossref record; 102 of the 102 references it cites were found in a registry or an index.
Advances in the Design of 3D‐Structured Electrode Materials for Lithium‐Metal Anodes
Abstract
Although the lithium‐metal anode (LMA) can deliver a high theoretical capacity of ≈3860 mAh g−1 at a low redox potential of −3.040 V (vs the standard hydrogen electrode), its application in rechargeable batteries is hindered by the poor Coulombic efficiency and safety issues caused by dendritic metal growth. Consequently, careful electrode design, electrolyte engineering, solid‐electrolyte interface control, protective layer introduction, and other strategies are suggested as possible solutions. In particular, one should note the great potential of 3D‐structured electrode materials, which feature high active specific surface areas and stereoscopic structures with multitudinous lithiophilic sites and can therefore facilitate rapid Li‐ion flux and metal nucleation as well as mitigate Li dendrite formation through the kinetic control of metal deposition even at high local current densities. This progress report reviews the design of 3D‐structured electrode materials for LMA according to their categories, namely 1) metal‐based materials, 2) carbon‐based materials, and 3) their hybrids, and allows the results obtained under different experimental conditions to be seen at a single glance, thus being helpful for researchers working in related fields.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Armand, M., & Tarascon, J.-M. (2008) · Nature · doi:10.1038/451652a · Cited by 19,612
Electrical energy storage for the grid: A battery of choices
Dunn, B., Kamath, H., & Tarascon, J.-M. (2011) · Science · doi:10.1126/science.1212741 · Cited by 15,072
Opportunities and challenges for a sustainable energy future
Chu, S., & Majumdar, A. (2012) · Nature · doi:10.1038/nature11475 · Cited by 12,550
The Li-Ion Rechargeable Battery: A Perspective
Goodenough, J. B., & Park, K.-S. (2013) · Journal of the American Chemical Society · doi:10.1021/ja3091438 · Cited by 9,962
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
30 Years of Lithium‐Ion Batteries
Li, M., Lu, J., Chen, Z., & Amine, K. (2018) · Advanced Materials · doi:10.1002/adma.201800561 · Cited by 6,039
Pathways for practical high-energy long-cycling lithium metal batteries
Liu, J., Bao, Z., Cui, Y., Dufek, E. J., Goodenough, J. B., Khalifah, P., Li, Q., Liaw, B. Y., Liu, P., Manthiram, A., et al. (2019) · Nature Energy · doi:10.1038/s41560-019-0338-x · Cited by 3,412
A pomegranate-inspired nanoscale design for large-volume-change lithium battery anodes
Liu, N., Lu, Z., Zhao, J., McDowell, M. T., Lee, H.-W., Zhao, W., & Cui, Y. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.6 · Cited by 2,491
Dendrite-Free Lithium Deposition via Self-Healing Electrostatic Shield Mechanism
Ding, F., Xu, W., Graff, G. L., Zhang, J., Sushko, M. L., Chen, X., Shao, Y., Engelhard, M. H., Nie, Z., Xiao, J., et al. (2013) · Journal of the American Chemical Society · doi:10.1021/ja312241y · Cited by 2,107
Research opportunities to advance solar energy utilization
Lewis, N. S. (2016) · Science · doi:10.1126/science.aad1920 · Cited by 2,075
Metadata
- Authors
- Park, S., Jin, H., & Yun, Y. S.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2020-09-24
- Volume
- 32
- Issue
- 51
- Pages
- e2002193-e2002193
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W3088397504
- Cited by
- 301
- References
- 102
- FWCI
- 16.20
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Advances in the Design of 3D‐Structured Electrode Materials for Lithium‐Metal Anodes. https://app.cochat.ai/papers/10.1002/adma.202002193
- The paper
- Park, S., Jin, H., & Yun, Y. S. (2020). Advances in the Design of 3D‐Structured Electrode Materials for Lithium‐Metal Anodes. Advanced Materials. https://doi.org/10.1002/adma.202002193
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.