The DOI matches its Crossref record; 102 of the 102 references it cites were found in a registry or an index.
Advances in the Design of 3D‐Structured Electrode Materials for Lithium‐Metal Anodes
Abstract
Although the lithium‐metal anode (LMA) can deliver a high theoretical capacity of ≈3860 mAh g−1 at a low redox potential of −3.040 V (vs the standard hydrogen electrode), its application in rechargeable batteries is hindered by the poor Coulombic efficiency and safety issues caused by dendritic metal growth. Consequently, careful electrode design, electrolyte engineering, solid‐electrolyte interface control, protective layer introduction, and other strategies are suggested as possible solutions. In particular, one should note the great potential of 3D‐structured electrode materials, which feature high active specific surface areas and stereoscopic structures with multitudinous lithiophilic sites and can therefore facilitate rapid Li‐ion flux and metal nucleation as well as mitigate Li dendrite formation through the kinetic control of metal deposition even at high local current densities. This progress report reviews the design of 3D‐structured electrode materials for LMA according to their categories, namely 1) metal‐based materials, 2) carbon‐based materials, and 3) their hybrids, and allows the results obtained under different experimental conditions to be seen at a single glance, thus being helpful for researchers working in related fields.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Armand, M., & Tarascon, J.-M. (2008) · Nature · doi:10.1038/451652a · Cited by 19,612
Electrical energy storage for the grid: A battery of choices
Dunn, B., Kamath, H., & Tarascon, J.-M. (2011) · Science · doi:10.1126/science.1212741 · Cited by 15,072
Opportunities and challenges for a sustainable energy future
Chu, S., & Majumdar, A. (2012) · Nature · doi:10.1038/nature11475 · Cited by 12,550
The Li-Ion Rechargeable Battery: A Perspective
Goodenough, J. B., & Park, K.-S. (2013) · Journal of the American Chemical Society · doi:10.1021/ja3091438 · Cited by 9,962
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
30 Years of Lithium‐Ion Batteries
Li, M., Lu, J., Chen, Z., & Amine, K. (2018) · Advanced Materials · doi:10.1002/adma.201800561 · Cited by 6,039
Pathways for practical high-energy long-cycling lithium metal batteries
Liu, J., Bao, Z., Cui, Y., Dufek, E. J., Goodenough, J. B., Khalifah, P., Li, Q., Liaw, B. Y., Liu, P., Manthiram, A., et al. (2019) · Nature Energy · doi:10.1038/s41560-019-0338-x · Cited by 3,412
A pomegranate-inspired nanoscale design for large-volume-change lithium battery anodes
Liu, N., Lu, Z., Zhao, J., McDowell, M. T., Lee, H.-W., Zhao, W., & Cui, Y. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.6 · Cited by 2,491
Dendrite-Free Lithium Deposition via Self-Healing Electrostatic Shield Mechanism
Ding, F., Xu, W., Graff, G. L., Zhang, J., Sushko, M. L., Chen, X., Shao, Y., Engelhard, M. H., Nie, Z., Xiao, J., et al. (2013) · Journal of the American Chemical Society · doi:10.1021/ja312241y · Cited by 2,107
Research opportunities to advance solar energy utilization
Lewis, N. S. (2016) · Science · doi:10.1126/science.aad1920 · Cited by 2,075
Albertus, P., Babinec, S., Litzelman, S., & Newman, A. (2017) · Nature Energy · doi:10.1038/s41560-017-0047-2 · Cited by 1,888
Lin, D., Liu, Y., Liang, Z., Lee, H.-W., Sun, J., Wang, H., Yan, K., Xie, J., & Cui, Y. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2016.32 · Cited by 1,798
Interconnected hollow carbon nanospheres for stable lithium metal anodes
Zheng, G., Lee, S. W., Liang, Z., Lee, H.-W., Yan, K., Yao, H., Wang, H., Li, W., Chu, S., & Cui, Y. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.152 · Cited by 1,764
Nanoscale Nucleation and Growth of Electrodeposited Lithium Metal
Pei, A., Zheng, G., Shi, F., Li, Y., & Cui, Y. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b04755 · Cited by 1,726
Lee, Y.-G., Fujiki, S., Jung, C., Suzuki, N., Yashiro, N., Omoda, R., Ko, D.-S., Shiratsuchi, T., Sugimoto, T., Ryu, S., et al. (2020) · Nature Energy · doi:10.1038/s41560-020-0575-z · Cited by 1,708
Fluoroethylene Carbonate Additives to Render Uniform Li Deposits in Lithium Metal Batteries
Zhang, X., Cheng, X., Chen, X., Yan, C., & Zhang, Q. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201605989 · Cited by 1,699
Multidimensional materials and device architectures for future hybrid energy storage
Lukatskaya, M. R., Dunn, B., & Gogotsi, Y. (2016) · Nature Communications · doi:10.1038/ncomms12647 · Cited by 1,618
Functional Materials for Rechargeable Batteries
Cheng, F., Liang, J., Tao, Z., & Chen, J. (2011) · Advanced Materials · doi:10.1002/adma.201003587 · Cited by 1,609
Transition of lithium growth mechanisms in liquid electrolytes
Bai, P., Li, J., Brushett, F. R., & Bazant, M. Z. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01674j · Cited by 1,591
Yang, C.-P., Yin, Y.-X., Zhang, S.-F., Li, N.-W., & Guo, Y.-G. (2015) · Nature Communications · doi:10.1038/ncomms9058 · Cited by 1,589
The synergetic effect of lithium polysulfide and lithium nitrate to prevent lithium dendrite growth
Li, W., Yao, H., Yan, K., Zheng, G., Liang, Z., Chiang, Y.-M., & Cui, Y. (2015) · Nature Communications · doi:10.1038/ncomms8436 · Cited by 1,540
Electrochemical aspects of the generation of ramified metallic electrodeposits
Chazalviel, J.-N. (1990) · Physical Review A · doi:10.1103/physreva.42.7355 · Cited by 1,402
Zhang, R., Chen, X., Chen, X., Cheng, X., Zhang, X., Yan, C., & Zhang, Q. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201702099 · Cited by 1,225
Reviving Lithium‐Metal Anodes for Next‐Generation High‐Energy Batteries
Guo, Y., Li, H., & Zhai, T. (2017) · Advanced Materials · doi:10.1002/adma.201700007 · Cited by 1,215
Dendritic growth mechanisms in lithium/polymer cells
Brissot, C., Rosso, M., Chazalviel, J.-N., & Lascaud, S. (1999) · Journal of Power Sources · doi:10.1016/s0378-7753(98)00242-0 · Cited by 945
3D Porous Cu Current Collector/Li‐Metal Composite Anode for Stable Lithium‐Metal Batteries
Li, Q., Zhu, S., & Lu, Y. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201606422 · Cited by 854
Prestoring Lithium into Stable 3D Nickel Foam Host as Dendrite‐Free Lithium Metal Anode
Chi, S., Liu, Y., Song, W., Fan, L., & Zhang, Q. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201700348 · Cited by 846
Next-Generation Lithium Metal Anode Engineering via Atomic Layer Deposition
Kozen, A. C., Lin, C.-F., Pearse, A. J., Schroeder, M. A., Han, X., Hu, L., Lee, S.-B., Rubloff, G. W., & Noked, M. (2015) · ACS Nano · doi:10.1021/acsnano.5b02166 · Cited by 816
Dendrite Growth in Lithium/Polymer Systems
Monroe, C., & Newman, J. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1606686 · Cited by 800
Free-Standing Copper Nanowire Network Current Collector for Improving Lithium Anode Performance
Lu, L.-L., Ge, J., Yang, J.-N., Chen, S.-M., Yao, H.-B., Zhou, F., & Yu, S.-H. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b01581 · Cited by 678
Ultrafine Silver Nanoparticles for Seeded Lithium Deposition toward Stable Lithium Metal Anode
Yang, C., Yao, Y., He, S., Xie, H., Hitz, E., & Hu, L. (2017) · Advanced Materials · doi:10.1002/adma.201702714 · Cited by 661
Towards better Li metal anodes: Challenges and strategies
Zhang, Y., Zuo, T.-T., Popovic, J., Lim, K., Yin, Y.-X., Maier, J., & Guo, Y.-G. (2020) · Materials Today · doi:10.1016/j.mattod.2019.09.018 · Cited by 653
Chen, X., Chen, X.-R., Hou, T.-Z., Li, B.-Q., Cheng, X.-B., Zhang, R., & Zhang, Q. (2019) · Science Advances · doi:10.1126/sciadv.aau7728 · Cited by 610
Dendrite short-circuit and fuse effect on Li/polymer/Li cells
Rosso, M., Brissot, C., Teyssot, A., Dollé, M., Sannier, L., Tarascon, J.-M., Bouchet, R., & Lascaud, S. (2006) · Electrochimica Acta · doi:10.1016/j.electacta.2006.02.004 · Cited by 589
Self-smoothing anode for achieving high-energy lithium metal batteries under realistic conditions
Niu, C., Pan, H., Xu, W., Xiao, J., Zhang, J.-G., Luo, L., Wang, C., Mei, D., Meng, J., Wang, X., et al. (2019) · Nature Nanotechnology · doi:10.1038/s41565-019-0427-9 · Cited by 589
Graphitized Carbon Fibers as Multifunctional 3D Current Collectors for High Areal Capacity Li Anodes
Zuo, T., Wu, X., Yang, C., Yin, Y., Ye, H., Li, N., & Guo, Y. (2017) · Advanced Materials · doi:10.1002/adma.201700389 · Cited by 579
Wood, K. N., Noked, M., & Dasgupta, N. P. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00650 · Cited by 558
Liu, L., Yin, Y., Li, J., Wang, S., Guo, Y., & Wan, L. (2018) · Advanced Materials · doi:10.1002/adma.201706216 · Cited by 538
High-capacity, low-tortuosity, and channel-guided lithium metal anode
Zhang, Y., Luo, W., Wang, C., Li, Y., Chen, C., Song, J., Dai, J., Hitz, E. M., Xu, S., Yang, C., et al. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1618871114 · Cited by 472
Air-stable and freestanding lithium alloy/graphene foil as an alternative to lithium metal anodes
Zhao, J., Zhou, G., Yan, K., Xie, J., Li, Y., Liao, L., Jin, Y., Liu, K., Hsu, P.-C., Wang, J., et al. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.129 · Cited by 468
Defect-induced plating of lithium metal within porous graphene networks
Mukherjee, R., Thomas, A. V., Datta, D., Singh, E., Li, J., Eksik, O., Shenoy, V. B., & Koratkar, N. (2014) · Nature Communications · doi:10.1038/ncomms4710 · Cited by 436
Zhao, H., Lei, D., He, Y., Yuan, Y., Yun, Q., Ni, B., Lv, W., Li, B., Yang, Q., Kang, F., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800266 · Cited by 431
Liu, S., Li, J., Yan, X., Su, Q., Lu, Y., Qiu, J., Wang, Z., Lin, X., Huang, J., Liu, R., et al. (2018) · Advanced Materials · doi:10.1002/adma.201706895 · Cited by 404
Betz, J., Bieker, G., Meister, P., Placke, T., Winter, M., & Schmuch, R. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803170 · Cited by 390
Conductivity and lithiophilicity gradients guide lithium deposition to mitigate short circuits
Pu, J., Li, J., Zhang, K., Zhang, T., Li, C., Ma, H., Zhu, J., Braun, P. V., Lu, J., & Zhang, H. (2019) · Nature Communications · doi:10.1038/s41467-019-09932-1 · Cited by 387
MXene Aerogel Scaffolds for High‐Rate Lithium Metal Anodes
Zhang, X., Lv, R., Wang, A., Guo, W., Liu, X., & Luo, J. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201808714 · Cited by 354
Lithiophilic LiC6 Layers on Carbon Hosts Enabling Stable Li Metal Anode in Working Batteries
Shi, P., Li, T., Zhang, R., Shen, X., Cheng, X., Xu, R., Huang, J., Chen, X., Liu, H., & Zhang, Q. (2019) · Advanced Materials · doi:10.1002/adma.201807131 · Cited by 352
Zhang, C., Lv, W., Zhou, G., Huang, Z., Zhang, Y., Lyu, R., Wu, H., Yun, Q., Kang, F., & Yang, Q. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703404 · Cited by 351
Recent Developments of the Lithium Metal Anode for Rechargeable Non‐Aqueous Batteries
Zhang, K., Lee, G., Park, M., Li, W., & Kang, Y. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600811 · Cited by 345
3D TiC/C Core/Shell Nanowire Skeleton for Dendrite‐Free and Long‐Life Lithium Metal Anode
Liu, S., Xia, X., Zhong, Y., Deng, S., Yao, Z., Zhang, L., Cheng, X., Wang, X., Zhang, Q., & Tu, J. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702322 · Cited by 292
Cui, C., Yang, C., Eidson, N., Chen, J., Han, F., Chen, L., Luo, C., Wang, P., Fan, X., & Wang, C. (2020) · Advanced Materials · doi:10.1002/adma.201906427 · Cited by 272
3D Wettable Framework for Dendrite‐Free Alkali Metal Anodes
Zhang, Y., Wang, C., Pastel, G., Kuang, Y., Xie, H., Li, Y., Liu, B., Luo, W., Chen, C., & Hu, L. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800635 · Cited by 265
Nucleation and Early Stage Growth of Li Electrodeposits
Biswal, P., Stalin, S., Kludze, A., Choudhury, S., & Archer, L. A. (2019) · Nano Letters · doi:10.1021/acs.nanolett.9b03548 · Cited by 265
A carbon-based 3D current collector with surface protection for Li metal anode
Zhang, Y., Liu, B., Hitz, E., Luo, W., Yao, Y., Li, Y., Dai, J., Chen, C., Wang, Y., Yang, C., et al. (2017) · Nano Research · doi:10.1007/s12274-017-1461-2 · Cited by 252
Wang, H., Li, Y., Li, Y., Liu, Y., Lin, D., Zhu, C., Chen, G., Yang, A., Yan, K., Chen, H., et al. (2019) · Nano Letters · doi:10.1021/acs.nanolett.8b04906 · Cited by 232
Graphitic Carbon Nitride Induced Micro‐Electric Field for Dendrite‐Free Lithium Metal Anodes
Lu, Z., Liang, Q., Wang, B., Tao, Y., Zhao, Y., Lv, W., Liu, D., Zhang, C., Weng, Z., Liang, J., et al. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803186 · Cited by 216
Li, S., Liu, Q., Zhou, J., Pan, T., Gao, L., Zhang, W., Fan, L., & Lu, Y. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201808847 · Cited by 191
Zhang, C., Liu, S., Li, G., Zhang, C., Liu, X., & Luo, J. (2018) · Advanced Materials · doi:10.1002/adma.201801328 · Cited by 189
Zhang, C., Lyu, R., Lv, W., Li, H., Jiang, W., Li, J., Gu, S., Zhou, G., Huang, Z., Zhang, Y., et al. (2019) · Advanced Materials · doi:10.1002/adma.201904991 · Cited by 184
Lithiophilic Ag Nanoparticle Layer on Cu Current Collector toward Stable Li Metal Anode
Hou, Z., Yu, Y., Wang, W., Zhao, X., Di, Q., Chen, Q., Chen, W., Liu, Y., & Quan, Z. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b01521 · Cited by 179
Jin, S., Sun, Z., Guo, Y., Qi, Z., Guo, C., Kong, X., Zhu, Y., & Ji, H. (2017) · Advanced Materials · doi:10.1002/adma.201700783 · Cited by 172
Yang, G., Chen, J., Xiao, P., Agboola, P. O., Shakir, I., & Xu, Y. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta02810a · Cited by 169
Adair, K. R., Iqbal, M., Wang, C., Zhao, Y., Banis, M. N., Li, R., Zhang, L., Yang, R., Lu, S., & Sun, X. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.10.002 · Cited by 168
Qiu, H., Tang, T., Asif, M., Huang, X., & Hou, Y. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201808468 · Cited by 167
Luan, J., Zhang, Q., Yuan, H., Sun, D., Peng, Z., Tang, Y., Ji, X., & Wang, H. (2019) · Advanced Science · doi:10.1002/advs.201901433 · Cited by 164
Li, Z., Li, X., Zhou, L., Xiao, Z., Zhou, S., Zhang, X., Li, L., & Zhi, L. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.04.040 · Cited by 162
He, J., & Manthiram, A. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903241 · Cited by 162
Zhao, F., Zhou, X., Deng, W., & Liu, Z. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.04.087 · Cited by 161
Lin, K., Qin, X., Liu, M., Xu, X., Liang, G., Wu, J., Kang, F., Chen, G., & Li, B. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201903229 · Cited by 159
Duan, H., Zhang, J., Chen, X., Zhang, X.-D., Li, J.-Y., Huang, L.-B., Zhang, X., Shi, J.-L., Yin, Y.-X., Zhang, Q., et al. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b10488 · Cited by 158
Regulating Lithium Nucleation via CNTs Modifying Carbon Cloth Film for Stable Li Metal Anode
Liu, F., Xu, R. C., Hu, Z., Ye, S., Zeng, S., Yao, Y., Li, S., & Yu, Y. M. (2018) · Small · doi:10.1002/smll.201803734 · Cited by 154
Unique 3D nanoporous/macroporous structure Cu current collector for dendrite-free lithium deposition
Liu, H., Wang, E., Zhang, Q., Ren, Y., Guo, X., Wang, L., Li, G., & Yu, H. (2018) · Energy storage materials · doi:10.1016/j.ensm.2018.07.010 · Cited by 146
Cui, J., Yao, S., Ihsan‐Ul‐Haq, M., Wu, J., & Kim, J. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201802777 · Cited by 143
A conductive-dielectric gradient framework for stable lithium metal anode
Li, J., Zou, P., Chiang, S. W., Yao, W., Wang, Y., Liu, P., Liang, C., Kang, F., & Yang, C. (2019) · Energy storage materials · doi:10.1016/j.ensm.2019.06.019 · Cited by 141
Cai, W., Li, G., Luo, D., Xiao, G., Zhu, S., Zhao, Y., Chen, Z., Zhu, Y., & Qian, Y. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201802561 · Cited by 139
Ye, L., Liao, M., Sun, H., Yang, Y., Tang, C., Zhao, Y., Wang, L., Xu, Y., Zhang, L., Wang, B., et al. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201814324 · Cited by 136
Huang, K., Li, Z., Xu, Q., Liu, H., Li, H., & Wang, Y. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900853 · Cited by 125
Xie, J., Ye, J., Pan, F., Sun, X., Ni, K., Yuan, H., Wang, X., Shu, N., Chen, C. H., & Zhu, Y. (2018) · Advanced Materials · doi:10.1002/adma.201805654 · Cited by 123
Electrical Conductivity Gradient Based on Heterofibrous Scaffolds for Stable Lithium‐Metal Batteries
Hong, S., Jung, D., Kim, J., Lee, Y., Cho, S., Joo, S. H., Lee, H., Lee, K., & Lee, S. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201908868 · Cited by 122
Oxygen and nitrogen co-doped porous carbon granules enabling dendrite-free lithium metal anode
Liu, Y., Qin, X., Zhang, S., Huang, Y., Kang, F., Chen, G., & Li, B. (2018) · Energy storage materials · doi:10.1016/j.ensm.2018.08.018 · Cited by 119
Direct growth of 3D host on Cu foil for stable lithium metal anode
Shen, F., Zhang, F., Zheng, Y., Fan, Z., Li, Z., Sun, Z., Xuan, Y., Zhao, B., Lin, Z., Gui, X., et al. (2018) · Energy storage materials · doi:10.1016/j.ensm.2018.02.005 · Cited by 118
Stable Li metal anode with protected interface for high-performance Li metal batteries
Wang, Q., Yang, C., Yang, J., Wu, K. M., Qi, L., Tang, H., Zhang, Z., Liu, W., & Zhou, H. (2018) · Energy storage materials · doi:10.1016/j.ensm.2018.04.030 · Cited by 108
Li, G., Liu, Z., Wang, D., Wang, D., He, X., Liu, S., Gao, Y., Alzahrani, A. S., Kim, S. H., Chen, L., et al. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900704 · Cited by 108
Macroporous Catalytic Carbon Nanotemplates for Sodium Metal Anodes
Yoon, H. J., Kim, N. R., Jin, H., & Yun, Y. S. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201701261 · Cited by 103
Self-citationEnabling Stable Lithium Metal Anode through Electrochemical Kinetics Manipulation
Han, Y., Jie, Y., Huang, F., Chen, Y., Lei, Z., Zhang, G., Ren, X., Qin, L., Cao, R., & Jiao, S. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201904629 · Cited by 103
Wang, X., Pan, Z., Wu, Y., Ding, X., Hong, X., Xu, G., Liu, M., Zhang, Y., & Li, W. (2018) · Nano Research · doi:10.1007/s12274-018-2245-z · Cited by 100
A 3D Lithium/Carbon Fiber Anode with Sustained Electrolyte Contact for Solid‐State Batteries
Zhang, Y., Shi, Y., Hu, X., Wang, W., Wen, R., Xin, S., & Guo, Y. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201903325 · Cited by 96
Qin, L., Xu, H. J., Wang, D., Zhu, J., Chen, J., Zhang, W., Zhang, P., Zhang, Y., Tian, W., & Sun, Z. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b07362 · Cited by 95
Chen, M., Zheng, J., Sheng, O., Jin, C., Yuan, H., Liu, T., Liu, Y., Wang, Y., Nai, J., & Tao, X. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta05684j · Cited by 93
Lithiated zinc oxide nanorod arrays on copper current collectors for robust Li metal anodes
Wang, G., Xiong, X., Zou, P., Fu, X., Lin, Z., Li, Y., Liu, Y., Yang, C., & Liu, M. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.122243 · Cited by 91
Tantratian, K., Cao, D., Abdelaziz, A., Sun, X. H., Sheng, J., Natan, A., Chen, L., & Zhu, H. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201902819 · Cited by 88
Expanded-graphite embedded in lithium metal as dendrite-free anode of lithium metal batteries
Zhao, Q., Hao, X., Su, S., Ma, J., Hu, Y., Liu, Y., Kang, F., & He, Y. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta04240g · Cited by 86
Zou, P., Chiang, S.-W., Li, J., Wang, Y., Wang, X., Wu, D., Nairan, A., Kang, F., & Yang, C. (2018) · Energy storage materials · doi:10.1016/j.ensm.2018.09.020 · Cited by 85
Pseudocapacitance Induced Uniform Plating/Stripping of Li Metal Anode in Vertical Graphene Nanowalls
Ren, F., Lu, Z., Zhang, H., Huai, L., Chen, X., Wu, S., Peng, Z., Wang, D., & Ye, J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201805638 · Cited by 78
Tang, Y., Shen, K., Lv, Z., Xu, X., Hou, G., Cao, H., Wu, L.-K., Zheng, G., & Deng, Y. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.09.083 · Cited by 73
Microporous carbon nanosheets with redox-active heteroatoms for pseudocapacitive charge storage
Yun, Y. S., Kim, D. H., Hong, S. J., Park, M., Park, Y. W., Kim, B. H., Jin, H., & Kang, K. (2015) · Nanoscale · doi:10.1039/c5nr04231c · Cited by 64
Self-citationAltimari, P., & Pagnanelli, F. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.04.094 · Cited by 59
Self-supporting lithiophilic N-doped carbon rod array for dendrite-free lithium metal anode
Chen, L., Chen, H., Wang, Z., Gong, X., Chen, X., Wang, M., & Jiao, S. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.01.131 · Cited by 50
Huang, X. L., Feng, X., Zhang, B., Zhang, L., Zhang, S.-C., Gao, B., Chu, P. K.-H., & Huo, K. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b08438 · Cited by 50
Sun, C., Wu, T., Wang, J., et al. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta06828c · Cited by 38
Catalytic Pyroprotein Seed Layers for Sodium Metal Anodes
Lee, M. E., Kwak, H. W., Kwak, J. H., Jin, H., & Yun, Y. S. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b15938 · Cited by 31
Self-citationJia, W., Chen, T., Wang, Y., Qu, S., Yao, Z., Liu, Y., Yin, Y., Zou, W., Zhou, F., & Li, J. (2019) · Electrochimica Acta · doi:10.1016/j.electacta.2019.04.054 · Cited by 30
Metadata
- Authors
- Park, S., Jin, H., & Yun, Y. S.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2020-09-24
- Volume
- 32
- Issue
- 51
- Pages
- e2002193-e2002193
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W3088397504
- Cited by
- 301
- References
- 102
- FWCI
- 16.20
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.