The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
Lattice‐Distortion‐Enhanced Yield Strength in a Refractory High‐Entropy Alloy
Open accessAbstract
Severe distortion is one of the four core effects in single‐phase high‐entropy alloys (HEAs) and contributes significantly to the yield strength. However, the connection between the atomic‐scale lattice distortion and macro‐scale mechanical properties through experimental verification has yet to be fully achieved, owing to two critical challenges: 1) the difficulty in the development of homogeneous single‐phase solid‐solution HEAs and 2) the ambiguity in describing the lattice distortion and related measurements and calculations. A single‐phase body‐centered‐cubic (BCC) refractory HEA, NbTaTiVZr, using thermodynamic modeling coupled with experimental verifications, is developed. Compared to the previously developed single‐phase NbTaTiV HEA, the NbTaTiVZr HEA shows a higher yield strength and comparable plasticity. The increase in yield strength is systematically and quantitatively studied in terms of lattice distortion using a theoretical model, first‐principles calculations, synchrotron X‐ray/neutron diffraction, atom‐probe tomography, and scanning transmission electron microscopy techniques. These results demonstrate that severe lattice distortion is a core factor for developing high strengths in refractory HEAs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yeh, J. ‐., Chen, S. ‐., Lin, S. ‐., Gan, J. ‐., Chin, T. ‐., Shun, T. ‐., Tsau, C. ‐., & Chang, S. ‐. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200300567 · Cited by 15,281
A critical review of high entropy alloys and related concepts
Miracle, D. B., & Senkov, O. N. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.08.081 · Cited by 8,973
The Deformation and Ageing of Mild Steel: III Discussion of Results
Hall, E. O. (1951) · Proceedings of the Physical Society. Section B · doi:10.1088/0370-1301/64/9/303 · Cited by 7,872
Microstructures and properties of high-entropy alloys
Zhang, Y., Zuo, T. T., Tang, Z., Gao, M. C., Dahmen, K. A., Liaw, P. K., & Lu, Z. P. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2013.10.001 · Cited by 7,128
Self-citationA fracture-resistant high-entropy alloy for cryogenic applications
Gludovatz, B., Hohenwarter, A., Catoor, D., Chang, E. H., George, E. P., & Ritchie, R. O. (2014) · Science · doi:10.1126/science.1254581 · Cited by 5,714
International Tables for X-Ray Crystallography
EWALD, P. P. (1953) · Nature · doi:10.1038/171944a0 · Cited by 5,274
Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off
Li, Z., Pradeep, K. G., Deng, Y., Raabe, D., & Tasan, C. C. (2016) · Nature · doi:10.1038/nature17981 · Cited by 4,071
A Handbook of Lattice Spacings and Structures of Metals and Alloys
(1958) · Elsevier eBooks · doi:10.1016/c2013-0-08243-6 · Cited by 3,753
Otto, F., Dlouhý, A., Somsen, C., Bei, H., Eggeler, G., & George, E. P. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.06.018 · Cited by 3,352
Microstructure and wear behavior of AlxCo1.5CrFeNi1.5Tiy high-entropy alloys
Chuang, M.-H., Tsai, M.-H., Wang, W.-R., Lin, S.-J., & Yeh, J.-W. (2011) · Acta Materialia · doi:10.1016/j.actamat.2011.06.041 · Cited by 1,481
Nanostructuring of metals by severe plastic deformation for advanced properties
Valiev, R. Z. (2004) · Nature Materials · doi:10.1038/nmat1180 · Cited by 1,444
Short-range order and its impact on the CrCoNi medium-entropy alloy
Zhang, R., Zhao, S., Ding, J., Chong, Y., Jia, T., Ophus, C., Asta, M., Ritchie, R. O., & Minor, A. M. (2020) · Nature · doi:10.1038/s41586-020-2275-z · Cited by 1,279
Yeh, J.-W., Lin, S.-J., Chin, T.-S., Gan, J.-Y., Chen, S.-K., Shun, T.-T., Tsau, C.-H., & Chou, S.-Y. (2004) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-006-0234-4 · Cited by 1,252
Making strong nanomaterials ductile with gradients
Lu, K. (2014) · Science · doi:10.1126/science.1255940 · Cited by 1,173
Experimentation, Validation, and Uncertainty Analysis for Engineers
Coleman, H. W., & Steele, W. G. (2018) · Wiley eBooks · doi:10.1002/9781119417989 · Cited by 1,154
Nanoscale origins of the damage tolerance of the high-entropy alloy CrMnFeCoNi
Zhang, Z., Mao, M. M., Wang, J., Gludovatz, B., Zhang, Z., Mao, S. X., George, E. P., Yu, Q., & Ritchie, R. O. (2015) · Nature Communications · doi:10.1038/ncomms10143 · Cited by 845
(2016) · Springer eBooks · doi:10.1007/978-3-319-27013-5 · Cited by 759
Yeh, J.-W., Chang, S.-Y., Hong, Y.-D., Chen, S.-K., & Lin, S.-J. (2007) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2007.01.003 · Cited by 742
Yao, M. J., Pradeep, K. G., Tasan, C. C., & Raabe, D. (2014) · Scripta Materialia · doi:10.1016/j.scriptamat.2013.09.030 · Cited by 685
Ultrastrong Medium‐Entropy Single‐Phase Alloys Designed via Severe Lattice Distortion
Sohn, S. S., da Silva, A. K., Ikeda, Y., Körmann, F., Lu, W., Choi, W. S., Gault, B., Ponge, D., Neugebauer, J., & Raabe, D. (2018) · Advanced Materials · doi:10.1002/adma.201807142 · Cited by 632
Lattice distortion in a strong and ductile refractory high-entropy alloy
Lee, C., Song, G., Gao, M. C., Feng, R., Chen, P., Brechtl, J., Chen, Y., An, K., Guo, W., Poplawsky, J. D., et al. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.08.053 · Cited by 622
Self-citationZhu, Y. T., & Liao, X. (2004) · Nature Materials · doi:10.1038/nmat1141 · Cited by 548
Yang, M., Yan, D., Yuan, F., Jiang, P., Ma, E., & Wu, X. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1807817115 · Cited by 548
Mechanistic origin of high strength in refractory BCC high entropy alloys up to 1900K
Maresca, F., & Curtin, W. A. (2020) · Acta Materialia · doi:10.1016/j.actamat.2019.10.015 · Cited by 508
Yield strength and misfit volumes of NiCoCr and implications for short-range-order
Yin, B., Yoshida, S., Tsuji, N., & Curtin, W. A. (2020) · Nature Communications · doi:10.1038/s41467-020-16083-1 · Cited by 311
Accelerated exploration of multi-principal element alloys for structural applications
Senkov, O. N., Miller, J. D., Miracle, D. B., & Woodward, C. (2015) · Calphad · doi:10.1016/j.calphad.2015.04.009 · Cited by 275
Moody, M. P., Stephenson, L. T., Ceguerra, A. V., & Ringer, S. P. (2008) · Microscopy Research and Technique · doi:10.1002/jemt.20582 · Cited by 243
Transformation induced softening and plasticity in high entropy alloys
Li, J., Fang, Q., Liu, B., & Liu, Y. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.01.002 · Cited by 243
Zhao, Y., Lei, Z., Lü, Z., Huang, J. C., & Nieh, T. G. (2019) · Materials Research Letters · doi:10.1080/21663831.2019.1610105 · Cited by 112
Measurement of lattice-fringe vectors from digital HREM images: experimental precision
de Ruijter, W. J., Sharma, R., McCartney, M. R., et al. (1995) · Ultramicroscopy · doi:10.1016/0304-3991(94)00166-k · Cited by 53
Cited by
High‐Entropy Enhanced Microwave Attenuation in Titanate Perovskites
Zhao, B., Yan, Z., Du, Y., Rao, L., Chen, G., Wu, Y., Yang, L., Zhang, J., Wu, L., Zhang, D. W., et al. (2023) · Advanced Materials · doi:10.1002/adma.202210243 · Cited by 440
Nanoprecipitate‐Strengthened High‐Entropy Alloys
Liu, L., Zhang, Y., Han, J., Wang, X., Jiang, W., Liu, C., Zhang, Z., & Liaw, P. K. (2021) · Advanced Science · doi:10.1002/advs.202100870 · Cited by 393
Self-citationMultifunctional High Entropy Alloys Enabled by Severe Lattice Distortion
Wang, H., He, Q., Gao, X., Shang, Y., Zhu, W., Zhao, W., Chen, Z., Gong, H., & Yang, Y. (2024) · Advanced Materials · doi:10.1002/adma.202305453 · Cited by 326
A review on the dynamic-mechanical behaviors of high-entropy alloys
Tang, Y., Wang, R., Xiao, B., Zhang, Z., Li, S., Qiao, J., Bai, S., Zhang, Y., & Liaw, P. K. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101090 · Cited by 314
Self-citationSuperconductivity in the bcc‐Type High‐Entropy Alloy TiHfNbTaMo
Zeng, L., Zhan, J., Boubeche, M., Li, K., Li, L., Yu, P., Wang, K., Zhang, C., Jin, K., Sun, Y., et al. (2023) · Advanced Quantum Technologies · doi:10.1002/qute.202300213 · Cited by 34
Self-citation
Metadata
- Authors
- Lee, C., Chou, Y., Kim, G., Gao, M. C., An, K., Brechtl, J., Zhang, C., Chen, W., Poplawsky, J. D., Song, G., Ren, Y., Chou, Y., & Liaw, P. K.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2020-11-02
- Volume
- 32
- Issue
- 49
- Pages
- e2004029-e2004029
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W3096723625
- Cited by
- 318
- References
- 30
- FWCI
- 14.94
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.