The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
Yield strength and misfit volumes of NiCoCr and implications for short-range-order
Open accessAbstract
The face-centered cubic medium-entropy alloy NiCoCr has received considerable attention for its good mechanical properties, uncertain stacking fault energy, etc, some of which have been attributed to chemical short-range order (SRO). Here, we examine the yield strength and misfit volumes of NiCoCr to determine whether SRO has measurably influenced mechanical properties. Polycrystalline strengths show no systematic trend with different processing conditions. Measured misfit volumes in NiCoCr are consistent with those in random binaries. Yield strength prediction of a random NiCoCr alloy matches well with experiments. Finally, we show that standard spin-polarized density functional theory (DFT) calculations of misfit volumes are not accurate for NiCoCr. This implies that DFT may be inaccurate for other subtle structural quantities such as atom-atom bond distance so that caution is required in drawing conclusions about NiCoCr based on DFT. These findings all lead to the conclusion that, under typical processing conditions, SRO in NiCoCr is either negligible or has no systematic measurable effect on strength.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Generalized Gradient Approximation Made Simple
Perdew, J. P., Burke, K., & Ernzerhof, M. (1996) · Physical Review Letters · doi:10.1103/physrevlett.77.3865 · Cited by 215,824
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set
Kresse, G., & Furthmüller, J. (1996) · Physical Review B · doi:10.1103/physrevb.54.11169 · Cited by 123,652
From ultrasoft pseudopotentials to the projector augmented-wave method
Kresse, G., & Joubert, D. (1999) · Physical Review B · doi:10.1103/physrevb.59.1758 · Cited by 85,307
Special points for Brillouin-zone integrations
Monkhorst, H. J., & Pack, J. D. (1976) · Physical Review B · doi:10.1103/physrevb.13.5188 · Cited by 71,721
A critical review of high entropy alloys and related concepts
Miracle, D. B., & Senkov, O. N. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.08.081 · Cited by 8,973
High-precision sampling for Brillouin-zone integration in metals
Methfessel, M., & Paxton, A. T. (1989) · Physical Review B · doi:10.1103/physrevb.40.3616 · Cited by 7,774
A fracture-resistant high-entropy alloy for cryogenic applications
Gludovatz, B., Hohenwarter, A., Catoor, D., Chang, E. H., George, E. P., & Ritchie, R. O. (2014) · Science · doi:10.1126/science.1254581 · Cited by 5,714
George, E. P., Raabe, D., & Ritchie, R. O. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0121-4 · Cited by 5,047
Special quasirandom structures
Zunger, A., Wei, S.-H., Ferreira, L. G., & Bernard, J. E. (1990) · Physical Review Letters · doi:10.1103/physrevlett.65.353 · Cited by 3,935
Single Crystal Elastic Constants and Calculated Aggregate Properties. A Handbook
Simmons, G., & Wang, H. F. (1971) · Medical Entomology and Zoology · Cited by 2,644
Cited by
Direct observation of chemical short-range order in a medium-entropy alloy
Chen, X., Wang, Q., Cheng, Z., Zhu, M., Zhou, H., Jiang, P., Zhou, L., Xue, Q., Yuan, F., Zhu, J., et al. (2021) · Nature · doi:10.1038/s41586-021-03428-z · Cited by 819
Exceptional fracture toughness of CrCoNi-based medium- and high-entropy alloys at 20 kelvin
Liu, D., Yu, Q., Kabra, S., Jiang, M., Forna-Kreutzer, P., Zhang, R., Payne, M., Walsh, F., Gludovatz, B., Asta, M., et al. (2022) · Science · doi:10.1126/science.abp8070 · Cited by 543
Short-range ordering and its effects on mechanical properties of high-entropy alloys
Wu, Y., Zhang, F., Yuan, X., Huang, H., Wen, X., Wang, Y., Zhang, M., Wu, H., Liu, X., Wang, H., et al. (2021) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2020.06.018 · Cited by 414
Vanadium is an optimal element for strengthening in both fcc and bcc high-entropy alloys
Yin, B., Maresca, F., & Curtin, W. A. (2020) · Acta Materialia · doi:10.1016/j.actamat.2020.01.062 · Cited by 338
Self-citationMultifunctional High Entropy Alloys Enabled by Severe Lattice Distortion
Wang, H., He, Q., Gao, X., Shang, Y., Zhu, W., Zhao, W., Chen, Z., Gong, H., & Yang, Y. (2024) · Advanced Materials · doi:10.1002/adma.202305453 · Cited by 326
Metadata
- Authors
- Yin, B., Yoshida, S., Tsuji, N., & Curtin, W. A.
- Venue
- Nature Communications
- Published
- 2020-05-19
- Volume
- 11
- Issue
- 1
- Pages
- 2507-2507
- ISSN
- 2041-1723 (ISSN-L)
- OpenAlex
- W3027632988
- Cited by
- 311
- References
- 38
- FWCI
- 19.59
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Yield strength and misfit volumes of NiCoCr and implications for short-range-order. https://app.cochat.ai/papers/10.1038/s41467-020-16083-1
- The paper
- Yin, B., Yoshida, S., Tsuji, N., & Curtin, W. A. (2020). Yield strength and misfit volumes of NiCoCr and implications for short-range-order. Nature Communications. https://doi.org/10.1038/s41467-020-16083-1
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.