The DOI matches its Crossref record; 32 of the 32 references it cites were found in a registry or an index.
Single‐Junction Organic Photovoltaic Cell with 19% Efficiency
Abstract
Improving power conversion efficiency (PCE) is important for broadening the applications of organic photovoltaic (OPV) cells. Here, a maximum PCE of 19.0% (certified value of 18.7%) is achieved in single‐junction OPV cells by combining material design with a ternary blending strategy. An active layer comprising a new wide‐bandgap polymer donor named PBQx‐TF and a new low‐bandgap non‐fullerene acceptor (NFA) named eC9‐2Cl is rationally designed. With optimized light utilization, the resulting binary cell exhibits a good PCE of 17.7%. An NFA F‐BTA3 is then added to the active layer as a third component to simultaneously improve the photovoltaic parameters. The improved light unitization, cascaded energy level alignment, and enhanced intermolecular packing result in open‐circuit voltage of 0.879 V, short‐circuit current density of 26.7 mA cm−2, and fill factor of 0.809. This study demonstrates that further improvement of PCEs of high‐performance OPV cells requires fine tuning of the electronic structures and morphologies of the active layers.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yuan, J., Zhang, Y., Zhou, L., Zhang, G., Yip, H.-L., Lau, T.-K., Lu, X., Zhu, C., Peng, H., Johnson, P. A., et al. (2019) · Joule · doi:10.1016/j.joule.2019.01.004 · Cited by 5,883
An Electron Acceptor Challenging Fullerenes for Efficient Polymer Solar Cells
Lin, Y., Wang, J., Zhang, Z., Bai, H., Li, Y., Zhu, D., & Zhan, X. (2015) · Advanced Materials · doi:10.1002/adma.201404317 · Cited by 4,258
Fabrication and processing of polymer solar cells: A review of printing and coating techniques
Krebs, F. C. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.10.004 · Cited by 3,260
Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells
Liu, Y., Zhao, J., Li, Z., Mu, C., Ma, W., Hu, H., Jiang, K., Lin, H., Ade, H., & Yan, H. (2014) · Nature Communications · doi:10.1038/ncomms6293 · Cited by 3,106
18% Efficiency organic solar cells
Liu, Q., Jiang, Y., Jin, K., Qin, J., Xu, J., Li, W., Xiong, J., Liu, J., Xiao, Z., Sun, K., et al. (2020) · Science Bulletin · doi:10.1016/j.scib.2020.01.001 · Cited by 3,057
Self-citationSingle‐Junction Organic Photovoltaic Cells with Approaching 18% Efficiency
Cui, Y., Yao, H., Zhang, J., Xian, K., Zhang, T., Hong, L., Wang, Y., Xu, Y., Ma, K., An, C., et al. (2020) · Advanced Materials · doi:10.1002/adma.201908205 · Cited by 1,960
Self-citationUltrathin and lightweight organic solar cells with high flexibility
Kaltenbrunner, M., White, M. S., Głowacki, E. D., Sekitani, T., Someya, T., Sariciftci, N. S., & Bauer, S. (2012) · Nature Communications · doi:10.1038/ncomms1772 · Cited by 1,757
Kyaw, A. K. K., Wang, D. H., Gupta, V., Leong, W. L., Ke, L., Bazan, G. C., & Heeger, A. J. (2013) · ACS Nano · doi:10.1021/nn401267s · Cited by 1,046
Intrinsic non-radiative voltage losses in fullerene-based organic solar cells
Benduhn, J., Tvingstedt, K., Piersimoni, F., Ullbrich, S., Fan, Y., Tropiano, M., McGarry, K. A., Zeika, O., Riede, M. K., Douglas, C. J., et al. (2017) · Nature Energy · doi:10.1038/nenergy.2017.53 · Cited by 738
Understanding Energy Loss in Organic Solar Cells: Toward a New Efficiency Regime
Menke, S. M., Ran, N. A., Bazan, G. C., & Friend, R. H. (2018) · Joule · doi:10.1016/j.joule.2017.09.020 · Cited by 630
Zhu, L., Zhang, M., Zhou, G., Hao, T., Xu, J., Wang, J., Qiu, C., Prine, N., Ali, J., Feng, W., et al. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201904234 · Cited by 585
A History and Perspective of Non‐Fullerene Electron Acceptors for Organic Solar Cells
Armin, A., Li, W., Sandberg, O. J., Xiao, Z., Ding, L., Nelson, J., Neher, D., Vandewal, K., Shoaee, S., Wang, T., et al. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202003570 · Cited by 545
Conjugated Polymer–Small Molecule Alloy Leads to High Efficient Ternary Organic Solar Cells
Zhang, J., Zhang, Y., Fang, J., Lu, K., Wang, Z., Ma, W., & Wei, Z. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b03449 · Cited by 530
Self-citationThe role of the third component in ternary organic solar cells
Gasparini, N., Salleo, A., McCulloch, I., & Baran, D. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0093-4 · Cited by 494
Wang, R., Zhang, C., Li, Q., Zhang, Z., Wang, X., & Xiao, M. (2020) · Journal of the American Chemical Society · doi:10.1021/jacs.0c04890 · Cited by 474
Zhou, Z., Liu, W., Zhou, G., Zhang, M., Qian, D., Zhang, J., Chen, S., Xu, S., Yang, C., Gao, F., et al. (2020) · Advanced Materials · doi:10.1002/adma.201906324 · Cited by 450
Self-citationPolymer Donors for High‐Performance Non‐Fullerene Organic Solar Cells
Fu, H., Wang, Z., & Sun, Y. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201806291 · Cited by 436
Zhu, C., Yuan, J., Cai, F., Meng, L., Zhang, H., Chen, H., Li, J., Qiu, B., Peng, H., Chen, S., et al. (2020) · Energy & Environmental Science · doi:10.1039/d0ee00862a · Cited by 424
Barium: An Efficient Cathode Layer for Bulk-heterojunction Solar Cells
Gupta, V., Kyaw, A. K. K., Wang, D. H., Chand, S., Bazan, G. C., & Heeger, A. J. (2013) · Scientific Reports · doi:10.1038/srep01965 · Cited by 383
Andersen, T. R., Dam, H. F., Hösel, M., Helgesen, M., Carlé, J. E., Larsen-Olsen, T. T., Gevorgyan, S. A., Andreasen, J. W., Adams, J., Li, N., et al. (2014) · Energy & Environmental Science · doi:10.1039/c4ee01223b · Cited by 296
Ternary Organic Solar Cells with Efficiency >16.5% Based on Two Compatible Nonfullerene Acceptors
Song, J., Li, C., Zhu, L., Guo, J., Xu, J., Zhang, X., Weng, K., Zhang, K., Min, J., Hao, X., et al. (2019) · Advanced Materials · doi:10.1002/adma.201905645 · Cited by 275
Self-citationThe Path to 20% Power Conversion Efficiencies in Nonfullerene Acceptor Organic Solar Cells
Karki, A., Gillett, A. J., Friend, R. H., & Nguyen, T. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202003441 · Cited by 221
Dye-sensitized TiO2 thin-film solar cell research at the National Renewable Energy Laboratory (NREL)
Deb, S. K. (2005) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2004.09.007 · Cited by 184
Factors Controlling Open-Circuit Voltage Losses in Organic Solar Cells
Azzouzi, M., Kirchartz, T., & Nelson, J. (2019) · Trends in Chemistry · doi:10.1016/j.trechm.2019.01.010 · Cited by 173
Vollbrecht, J., Брус, В. В., Ko, S., Lee, J., Karki, A., Cao, D. X., Cho, K., Bazan, G. C., & Nguyen, T. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201901438 · Cited by 165
Versatile Ternary Approach for Novel Organic Solar Cells: A Review
Bi, P., & Hao, X. (2018) · Solar RRL · doi:10.1002/solr.201800263 · Cited by 141
Self-citationControl of aggregated structure of photovoltaic polymers for high‐efficiency solar cells
Gao, M., Wang, W., Hou, J., & Ye, L. (2021) · Aggregate · doi:10.1002/agt2.46 · Cited by 130
Self-citationWang, Y., Wang, Y., Zhu, L., Liu, H., Jin, F., Guo, X., Liu, F., Tang, Z., Zhang, M., & Li, Y. (2020) · Energy & Environmental Science · doi:10.1039/c9ee04199k · Cited by 120
Kahle, F., Rudnick, A. A., Bässler, H., & Köhler, A. (2018) · Materials Horizons · doi:10.1039/c8mh00564h · Cited by 82
Optical Analysis for Semitransparent Organic Solar Cells
Xia, R., Gu, H., Liu, S., Zhang, K., Yip, H., & Cao, Y. (2018) · Solar RRL · doi:10.1002/solr.201800270 · Cited by 76
Organic Photovoltaics: Relating Chemical Structure, Local Morphology, and Electronic Properties
Wang, T., Kupgan, G., & Brédas, J. (2020) · Trends in Chemistry · doi:10.1016/j.trechm.2020.03.006 · Cited by 63
Polymer Pre‐Aggregation Enables Optimal Morphology and High Performance in All‐Polymer Solar Cells
Xie, B., Zhang, K., Hu, Z., Fang, H., Lin, B., Yin, Q., He, B., Dong, S., Ying, L., Ma, W., et al. (2019) · Solar RRL · doi:10.1002/solr.201900385 · Cited by 60
Cited by
Zhu, L., Zhang, M., Xu, J., Li, C., Yan, J., Zhou, G., Zhong, W., Hao, T., Song, J., Xue, X., et al. (2022) · Nature Materials · doi:10.1038/s41563-022-01244-y · Cited by 2,432
Renewed Prospects for Organic Photovoltaics
Zhang, G., Lin, F. R., Qi, F., Heumüller, T., Distler, A., Egelhaaf, H.-J., Li, N., Chow, P. C. Y., Brabec, C. J., Jen, A. K.-Y., et al. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00955 · Cited by 1,052
Jiang, Y., Sun, S., Xu, R., Liu, F., Miao, X., Ran, G., Liu, K., Yi, Y., Zhang, W., & Zhu, X. (2024) · Nature Energy · doi:10.1038/s41560-024-01557-z · Cited by 813
Sun, R., Wu, Y., Yang, X., Gao, Y., Chen, Z., Li, K., Qiao, J., Wang, T., Guo, J., Liu, C., et al. (2022) · Advanced Materials · doi:10.1002/adma.202110147 · Cited by 621
Self-citationPolymer Semiconductors: Synthesis, Processing, and Applications
Ding, L., Yu, Z.-D., Wang, X.-Y., Yao, Z.-F., Lu, Y., Yang, C.-Y., Wang, J.-Y., & Pei, J. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00696 · Cited by 539
Metadata
- Authors
- Cui, Y., Xu, Y., Yao, H., Bi, P., Hong, L., Zhang, J., Zu, Y., Zhang, T., Qin, J., Ren, J., Chen, Z., He, C., Hao, X., Wei, Z., & Hou, J.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2021-08-31
- Volume
- 33
- Issue
- 41
- Pages
- e2102420-e2102420
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W3197814413
- Cited by
- 1,469
- References
- 32
- FWCI
- 91.45
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.