CoChat

Design of Aligned Porous Carbon Films with Single‐Atom Co–N–C Sites for High‐Current‐Density Hydrogen Generation

The DOI matches its Crossref record; 51 of the 53 references it cites were found in a registry or an index; 6 of the 12 sources its claims cite were checked for support.

Abstract

AbstractMetal‐ and nitrogen‐doped carbon (M–N–C) materials as a unique class of single‐atom catalysts (SACs) have increasingly attracted attention as the replacement of platinum for the hydrogen evolution reaction (HER); however, their employment as HER electrodes at high current densities of industrial level remains a grand challenge. Herein, an aligned porous carbon film embedded with single‐atom Co–N–C sites of exceptional activity and stability at high current densities is designed. Within the film, the atomic CoNx moieties exhibit high intrinsic activity, while the multiscale porosity of the carbon frameworks with vertically aligned microchannels afford facilitated mass transfer under the conditions of high production rate and ultrathick electrodes. Moreover, the superwetting properties of the film promote electrolyte wetting and ensure the timely removal of the evolving H2 gas bubbles. The as‐designed film can work as an efficient HER electrode to deliver 500 and 1000 mA cm−2 in acid at overpotentials of 272 and 343 mV, respectively, and can operate uninterruptedly and stably at 1000 mA cm−2 for at least 32 h under static conditions. These findings pave the road toward the rational design of SACs with improved activity and stability at high current densities in gas‐evolving electrocatalytic processes.

Overview

CoChat Summary

TL;DR

An aligned porous carbon film with single-atom Co–N–C sites (Co–NC–AF) is designed as a binder-free HER electrode that reaches 500 and 1000 mA cm−2 at overpotentials of 272 and 343 mV in acid and operates at 1000 mA cm−2 for at least 32 h under static conditions. The performance is attributed to atomic CoNx activity plus vertically aligned microchannels, multiscale porosity, and superwetting/superaerophobic surfaces that improve mass transport and bubble release.

Key findings

  • Co–NC–AF delivers 100, 300, 500, and 1000 mA cm−2 at η = 174, 234, 272, and 343 mV, respectively, in 0.5 m H2SO4; it has a close-to-zero onset η of 23 mV at 0.3 mA cm−2, needs 87 mV for 10 mA cm−2, a Tafel slope of 67.6 mV dec−1, j0 = 0.47 mA cm−2, TOF = 0.153 s−1 at η = 100 mV, and Faradaic efficiency of 98.9%.
  • Stability: Co–NC–AF runs at 1000 mA cm−2 for at least 32 h under static conditions with almost unchanged overpotential and overlapping post-test polarization; at 200 mA cm−2 it runs for at least 80 h with overpotential increasing by ≈32 mV (from ≈210 to ≈242 mV). Post-test XAFS shows Co remains atomically dispersed, and SEM shows intact porous frameworks and vertical alignment.
  • Structure/composition: Co–NC–AF contains 0.5 wt% Co, 4.5 wt% N, 5.2 wt% O, and 89.8 wt% C; BET surface area is 145.0 m2 g−1 with mesopores centered at ≈3.7 nm; aligned microchannel width is ≈20 µm; tortuosity is ≈1.7 versus ≈2.1 for Co–NC–RF; electrical conductivity is 22.4 versus 2.1 S m−1; Cdl is 336 versus 128 mF cm−2. Co K-edge EXAFS fitting gives first-shell Co–N(O) coordination number 3.5 at 1.87 Å.
  • Wettability/bubble release: water contact angle ≈0° and underwater gas-bubble contact angle ≈152.1° for Co–NC–AF, with bubble adhesive force <1 µN versus 21.9 µN for Co–NC–CF; at 100 mA cm−2, >90% of detached H2 bubbles on Co–NC–AF are within 0.2 mm.

Methods

  • Synthesis: O-MWCNTs and CoCl2·6H2O were hydrothermally self-assembled into a hydrogel, thinned into films, directionally frozen on a liquid-nitrogen-precooled copper plate, freeze-dried, and annealed at 750 °C for 1 h under Ar/NH3 to form Co–NC–AF. Controls included Co–NC–RF, NC–AF, Co–NC–CF, Co–NC–Slurry, Pt foil, and Pt/C.
  • Characterization: SEM, TEM, XRD, Raman, XPS, ICP-MS, BET/pore-size analysis, ADF-STEM, EDS, Co K-edge XAFS/XANES/EXAFS with wavelet transform and curve fitting, contact-angle measurements, and bubble adhesive-force measurements.
  • Electrochemistry: three-electrode tests in N2-saturated 0.5 m H2SO4 with Hg/HgSO4 reference and graphite rod counter; LSV at 5 mV s−1, EIS at η = 30 mV, Cdl from CV, Faradaic efficiency by water drainage, and galvanostatic stability at 200 or 1000 mA cm−2 without stirring or N2 purging; polarization curves were 100% iR-corrected.

Limitations

  • Stated in the paper: Co–NC–AF has low metal loading compared with previously reported nanoparticulate catalysts, and future work is directed toward increasing CoNx site contents to further improve HER performance.
  • Evident from the text: HER performance is reported only in 0.5 m H2SO4; no alkaline, neutral, or full-electrolyzer data are presented.
  • Evident from the text: TOF and areal active-site density estimates assume that each Co center accounts for one active site.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.1002/adma.202103533

Cites

51 of 51 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Verification

Claims the paper makes

5 Valid · 0 Not valid · 2 Not checked · 47 Own results and interpretations

34 more claims

Create a free account to see all 54 claims and every source verdict.

See all claims — free account
  • It may state two separate claims as one. 13
  • Probably not a substantial claim. 2

Create a free account to see these claims.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

Each contradiction between two passages listed here was confirmed by an independent check.

1 of 1

Citations

Cites

Show all 51 references

Cited by

Items 101–153 of 153

Metadata

Authors
Liu, R., Gong, Z., Liu, J., Dong, J., Liao, J., Liu, H., Huang, H., Liu, J., Yan, M., Huang, K., Gong, H., Zhu, J., Cui, C., Ye, G., & Fei, H.
Affiliations
  • Hunan University (CN)
  • Chinese Academy of Sciences (CN)
  • Beihang University (CN)
Corresponding author
  • Dong, Juncai
  • Ye, Gonglan
  • Fei, Huilong
Venue
Advanced Materials
Publisher
Wiley
Published
2021-08-23
Volume
33
Issue
41
Pages
e2103533-e2103533
ISSN
  • 0935-9648 (ISSN-L)
  • 1521-4095
OpenAlex
W3194108326
Cited by
152
References
53
Citations by year
2026: 12 · 2025: 23 · 2024: 41 · 2023: 28 · 2022: 40 · 2021: 8
FWCI
5.48
Type
journal article
Language
en
Open access
closed
Locations
  • Advanced Materials (publishedVersion)
  • PubMed (publishedVersion)
Funders
  • National Natural Science Foundation of China (51902099)
  • Fundamental Research Funds for the Central Universities (531119200087)
  • Youth Innovation Promotion Association of the Chinese Academy of Sciences
  • Hunan Provincial Science and Technology Department (2020JJ1001)
Topics
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › CO2 Reduction Techniques and Catalysts
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
Keywords
single-atom catalysts, hydrogen evolution reaction, high current density, platinum-free electrocatalysts, mass transfer, superwetting, gas bubble removal, acid electrolysis, electrocatalyst stability

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

The claim verdicts this report counts are experimental: their accuracy is not yet measured.

A language model drew the claims from the paper on 2026-10-11, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-11 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Cited sources are checked with a language model’s help (gpt-6-sol).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.