A Bionic Interface to Suppress the Coffee‐Ring Effect for Reliable and Flexible Perovskite Modules with a Near‐90% Yield Rate
The DOI matches its Crossref record; 47 of the 47 references it cites were found in a registry or an index.
Abstract
The inhomogeneity, poor interfacial contact, and pinholes caused by the coffee‐ring effect severely affect the printing reliability of flexible perovskite solar cells (PSCs). Herein, inspired by the bio‐glue of barnacles, a bionic interface layer (Bio‐IL) of NiOx/levodopa is introduced to suppress the coffee‐ring effect during printing perovskite modules. The coordination effect of the sticky functional groups in Bio‐IL can pin the three‐phase contact line and restrain the transport of perovskite colloidal particles during the printing and evaporation process. Moreover, the sedimentation rate of perovskite precursor is accelerated due to the electrostatic attraction and rapid volatilization from an extraordinary wettability. The superhydrophilic Bio‐IL affords an even spread over a large‐area substrate, which boosts a complete and uniform liquid film for heterogeneous nucleation as well as crystallization. Perovskite films on different large‐area substrates with negligible coffee‐ring effect are printed. Consequently, inverted flexible PSCs and perovskite solar modules achieve a high efficiency of 21.08% and 16.87%, respectively. This strategy ensures a highly reliable reproducibility of printing PSCs with a near 90% yield rate.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
The emergence of perovskite solar cells
Green, M. A., Ho-Baillie, A., & Snaith, H. J. (2014) · Nature Photonics · doi:10.1038/nphoton.2014.134 · Cited by 7,432
Capillary flow as the cause of ring stains from dried liquid drops
Deegan, R. D., Bakajin, O., Dupont, T. F., Huber, G., Nagel, S. R., & Witten, T. A. (1997) · Nature · doi:10.1038/39827 · Cited by 6,435
Electron-hole diffusion lengths > 175 μm in solution-grown CH 3 NH 3 PbI 3 single crystals
Dong, Q., Fang, Y., Shao, Y., Mulligan, P., Qiu, J., Cao, L., & Huang, J. (2015) · Science · doi:10.1126/science.aaa5760 · Cited by 5,643
Low trap-state density and long carrier diffusion in organolead trihalide perovskite single crystals
Shi, D., Adinolfi, V., Comin, R., Yuan, M., Alarousu, E., Buin, A., Chen, Y., Hoogland, S., Rothenberger, A., Katsiev, K., et al. (2015) · Science · doi:10.1126/science.aaa2725 · Cited by 5,139
Self-citationPerovskite solar cells with atomically coherent interlayers on SnO2 electrodes
Min, H., Lee, D. Y., Kim, J., Kim, G., Lee, K. S., Kim, J., Paik, M. J., Kim, Y. K., Kim, K. S., Kim, M. G., et al. (2021) · Nature · doi:10.1038/s41586-021-03964-8 · Cited by 3,174
Efficient perovskite solar cells via improved carrier management
Yoo, J. J., Seo, G., Chua, M. R., Park, T. G., Lu, Y., Rotermund, F., Kim, Y.-K., Moon, C. S., Jeon, N. J., Correa-Baena, J.-P., et al. (2021) · Nature · doi:10.1038/s41586-021-03285-w · Cited by 2,934
Challenges for commercializing perovskite solar cells
Rong, Y., Hu, Y., Mei, A., Tan, H., Saidaminov, M. I., Seok, S. I., McGehee, M. D., Sargent, E. H., & Han, H. (2018) · Science · doi:10.1126/science.aat8235 · Cited by 2,140
Sutherland, B. R., & Sargent, E. H. (2016) · Nature Photonics · doi:10.1038/nphoton.2016.62 · Cited by 1,730
Inkjet printing of single-crystal films
Minemawari, H., Yamada, T., Matsui, H., Tsutsumi, J., Haas, S., Chiba, R., Kumai, R., & Hasegawa, T. (2011) · Nature · doi:10.1038/nature10313 · Cited by 1,707
Suppression of the coffee-ring effect by shape-dependent capillary interactions
Yunker, P. J., Still, T., Lohr, M. A., & Yodh, A. G. (2011) · Nature · doi:10.1038/nature10344 · Cited by 1,618
Impact of strain relaxation on performance of α-formamidinium lead iodide perovskite solar cells
Kim, G., Min, H., Lee, K. S., Lee, D. Y., Yoon, S. M., & Seok, S. I. (2020) · Science · doi:10.1126/science.abc4417 · Cited by 1,346
Kaltenbrunner, M., Adam, G., Głowacki, E. D., Drack, M., Schwödiauer, R., Leonat, L., Apaydin, D. H., Groiss, H., Scharber, M. C., White, M. S., et al. (2015) · Nature Materials · doi:10.1038/nmat4388 · Cited by 1,024
Wen, Z., Yeh, M.-H., Guo, H., Wang, J., Zi, Y., Xu, W., Deng, J., Zhu, L., Wang, X., Hu, C., et al. (2016) · Science Advances · doi:10.1126/sciadv.1600097 · Cited by 854
Bu, T., Li, J., Zheng, F., Chen, W., Wen, X., Ku, Z., Peng, Y., Zhong, J., Cheng, Y.-B., & Huang, F. (2018) · Nature Communications · doi:10.1038/s41467-018-07099-9 · Cited by 815
Vapor-assisted deposition of highly efficient, stable black-phase FAPbI 3 perovskite solar cells
Lu, H., Liu, Y., Ahlawat, P., Mishra, A., Tress, W. R., Eickemeyer, F. T., Yang, Y., Fu, F., Wang, Z., Avalos, C. E., et al. (2020) · Science · doi:10.1126/science.abb8985 · Cited by 815
Present status and future prospects of perovskite photovoltaics
Snaith, H. J. (2018) · Nature Materials · doi:10.1038/s41563-018-0071-z · Cited by 803
Deng, Y., Zheng, X., Bai, Y., Wang, Q., Zhao, J., & Huang, J. (2018) · Nature Energy · doi:10.1038/s41560-018-0153-9 · Cited by 791
Bu, T., Li, J., Li, H., Tian, C., Su, J., Tong, G., Ono, L. K., Wang, C., Lin, Z., Chai, N., et al. (2021) · Science · doi:10.1126/science.abh1035 · Cited by 731
Deng, Y., Peng, E., Shao, Y., Xiao, Z., Dong, Q., & Huang, J. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03907f · Cited by 719
Regulating strain in perovskite thin films through charge-transport layers
Xue, D.-J., Hou, Y., Liu, S.-C., Wei, M., Chen, B., Huang, Z., Li, Z., Sun, B., Proppe, A. H., Dong, Y., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-15338-1 · Cited by 678
Stable room-temperature continuous-wave lasing in quasi-2D perovskite films
Qin, C., Sandanayaka, A. S. D., Zhao, C., Matsushima, T., Zhang, D., Fujihara, T., & Adachi, C. (2020) · Nature · doi:10.1038/s41586-020-2621-1 · Cited by 634
Interfacial toughening with self-assembled monolayers enhances perovskite solar cell reliability
Dai, Z., Yadavalli, S. K., Chen, M., Abbaspourtamijani, A., Qi, Y., & Padture, N. P. (2021) · Science · doi:10.1126/science.abf5602 · Cited by 625
Deng, Y., Van Brackle, C. H., Dai, X., Zhao, J., Chen, B., & Huang, J. (2019) · Science Advances · doi:10.1126/sciadv.aax7537 · Cited by 535
Interfacial Residual Stress Relaxation in Perovskite Solar Cells with Improved Stability
Wang, H., Zhu, C., Liu, L., Ma, S., Liu, P., Wu, J., Shi, C., Du, Q., Hao, Y., Xiang, S., et al. (2019) · Advanced Materials · doi:10.1002/adma.201904408 · Cited by 499
Flexible Perovskite Solar Cells
Jung, H. S., Han, G. S., Park, N.-G., & Ko, M. J. (2019) · Joule · doi:10.1016/j.joule.2019.07.023 · Cited by 449
Vapour-mediated sensing and motility in two-component droplets
Cira, N. J., Benusiglio, A., & Prakash, M. (2015) · Nature · doi:10.1038/nature14272 · Cited by 436
A fabrication process for flexible single-crystal perovskite devices
Lei, Y., Chen, Y., Zhang, R., Li, Y., Yan, Q., Lee, S., Yu, Y., Tsai, H., Choi, W., Wang, K., et al. (2020) · Nature · doi:10.1038/s41586-020-2526-z · Cited by 430
Self-citationStabilizing Perovskite Solar Cells to IEC61215:2016 Standards with over 9,000-h Operational Tracking
Mei, A., Sheng, Y., Ming, Y., Hu, Y., Rong, Y., Zhang, W., Luo, S., Na, G., Tian, C., Hou, X., et al. (2020) · Joule · doi:10.1016/j.joule.2020.09.010 · Cited by 386
Large-scale fabrication of structurally coloured cellulose nanocrystal films and effect pigments
Droguet, B. E., Liang, H.-L., Frka-Petesic, B., Parker, R. M., De Volder, M. F. L., Baumberg, J. J., & Vignolini, S. (2022) · Nature Materials · doi:10.1038/s41563-021-01135-8 · Cited by 308
Scalable Fabrication of Efficient Perovskite Solar Modules on Flexible Glass Substrates
Dai, X., Deng, Y., Van Brackle, C. H., Chen, S., Rudd, P. N., Xiao, X., Lin, Y., Chen, B., & Huang, J. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903108 · Cited by 279
Bio-inspired vertebral design for scalable and flexible perovskite solar cells
Meng, X., Cai, Z., Zhang, Y., Hu, X., Xing, Z., Huang, Z., Huang, Z., Cui, Y., Hu, T., Su, M., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-16831-3 · Cited by 272
Self-citationDu, P., Li, J., Wang, L., Sun, L., Wang, X., Xu, X., Yang, L., Pang, J., Liang, W., Luo, J., et al. (2021) · Nature Communications · doi:10.1038/s41467-021-25093-6 · Cited by 227
Stretchable Perovskite Solar Cells with Recoverable Performance
Meng, X., Xing, Z., Hu, X., Huang, Z., Hu, T., Tan, L., Li, F., & Chen, Y. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.202003813 · Cited by 213
Self-citationDielectric screening in perovskite photovoltaics
Su, R., Xu, Z., Wu, J., Luo, D., Hu, Q., Yang, W., Yang, X., Zhang, R., Yu, H., Russell, T. P., et al. (2021) · Nature Communications · doi:10.1038/s41467-021-22783-z · Cited by 208
Flexible Perovskite Solar Cells with High Power-Per-Weight: Progress, Application, and Perspectives
Hu, Y., Niu, T., Liu, Y., Zhou, Y., Xia, Y., Ran, C., Wu, Z., Song, L., Müller-Buschbaum, P., Chen, Y., et al. (2021) · ACS Energy Letters · doi:10.1021/acsenergylett.1c01193 · Cited by 207
Self-citationLiu, C., Yang, Y., Rakstys, K., Mahata, A., Franckevicius, M., Mosconi, E., Skackauskaite, R., Ding, B., Brooks, K. G., Usiobo, O. J., et al. (2021) · Nature Communications · doi:10.1038/s41467-021-26754-2 · Cited by 204
Progress, highlights and perspectives on NiO in perovskite photovoltaics
Di Girolamo, D., Di Giacomo, F., Matteocci, F., Marrani, A. G., Dini, D., & Abate, A. (2020) · Chemical Science · doi:10.1039/d0sc02859b · Cited by 204
Mechanisms of pattern formation from dried sessile drops
Parsa, M., Harmand, S., & Sefiane, K. (2018) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2018.03.007 · Cited by 196
Mixed-cation perovskite solar cells in space
Tu, Y., Xu, G., Yang, X., Zhang, Y., Li, Z., Su, R., Luo, D., Yang, W., Miao, Y., Cai, R., et al. (2019) · Science China Physics, Mechanics & Astronomy · doi:10.1007/s11433-019-9356-1 · Cited by 188
Self-citationYang, L., Xiong, Q., Li, Y., Gao, P., Xu, B., Lin, H., Li, X., & Miyasaka, T. (2021) · Journal of Materials Chemistry A · doi:10.1039/d0ta10717d · Cited by 181
Yoo, J. W., Jang, J., Kim, U., Lee, Y., Ji, S.-G., Noh, E., Hong, S., Choi, M., & Seok, S. I. (2021) · Joule · doi:10.1016/j.joule.2021.08.005 · Cited by 179
Wang, Z., Zeng, L., Zhang, C., Lu, Y., Qiu, S., Wang, C., Liu, C., Pan, L., Wu, S., Hu, J., et al. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202001240 · Cited by 134
Wang, H., Huang, Z., Xiao, S., Meng, X., Xing, Z., Rao, L., Gong, C., Wu, R., Hu, T., Tan, L., et al. (2021) · Journal of Materials Chemistry A · doi:10.1039/d0ta12067g · Cited by 84
Self-citationWearable Tin‐Based Perovskite Solar Cells Achieved by a Crystallographic Size Effect
Rao, L., Meng, X., Xiao, S., Xing, Z., Fu, Q., Wang, H., Gong, C., Hu, T., Hu, X., Guo, R., et al. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202104201 · Cited by 74
Self-citationAnnealing Induced Re-crystallization in CH3NH3PbI3−xClx for High Performance Perovskite Solar Cells
Yang, Y., Feng, S., Li, M., Xu, W., Yin, G., Wang, Z., Sun, B., & Gao, X. (2017) · Scientific Reports · doi:10.1038/srep46724 · Cited by 67
A Highly Tolerant Printing for Scalable and Flexible Perovskite Solar Cells
Xing, Z., Lin, S., Meng, X., Hu, T., Li, D., Fan, B., Cui, Y., Li, F., Hu, X., & Chen, Y. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202107726 · Cited by 65
Self-citation
Cited by
Mechanical Durability and Flexibility in Perovskite Photovoltaics: Advancements and Applications
Song, F., Zheng, D., Feng, J., Liu, J., Ye, T., Li, Z., Wang, K., Liu, S. (., & Yang, D. (2024) · Advanced Materials · doi:10.1002/adma.202312041 · Cited by 113
Metadata
- Authors
- Fan, B., Xiong, J., Zhang, Y., Gong, C., Li, F., Meng, X., Hu, X., Yuan, Z., Wang, F., & Chen, Y.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2022-06-15
- Volume
- 34
- Issue
- 29
- Pages
- e2201840-e2201840
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W4280555387
- Cited by
- 162
- References
- 47
- FWCI
- 8.97
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.