Bioinspired Liquid Crystalline Spinning Enables Scalable Fabrication of High‐Performing Fibrous Artificial Muscles
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
Leveraging liquid crystal elastomers (LCEs) to realize scalable fabrication of high‐performing fibrous artificial muscles is of particular interest because these active soft materials can provide large, reversible, programmable deformations upon environmental stimuli. High‐performing fibrous LCEs require the used processing technology to enable shaping LCEs into micro‐scale fine fibers as thin as possible while achieving macroscopic LC orientation, which however remains a daunting challenge. Here, a bioinspired spinning technology is reported that allows for continuous, high‐speed production (fabrication speed up to 8400 m h−1) of thin and aligned LCE microfibers combined with rapid deformation (actuation strain rate up to 810% s−1), powerful actuation (actuation stress up to 5.3 MPa), high response frequency (50 Hz), and long cycle life (250 000 cycles without obvious fatigue). Inspired by liquid crystalline spinning of spiders that takes advantage of multiple drawdowns to thin and align their dragline silks, internal drawdown via tapered‐wall‐induced‐shearing and external drawdown via mechanical stretching are employed to shape LCEs into long, thin, aligned microfibers with the desirable actuation performances, which few processing technologies can achieve. This bioinspired processing technology capable of scalable production of high‐performing fibrous LCEs would benefit the development of smart fabrics, intelligent wearable devices, humanoid robotics, and other areas.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Biodegradable, Elastic Shape-Memory Polymers for Potential Biomedical Applications
Lendlein, A., & Langer, R. (2002) · Science · doi:10.1126/science.1066102 · Cited by 2,146
3D printing of liquid crystal elastomeric actuators with spatially programed nematic order
Kotikian, A., Truby, R. L., Boley, J. W., White, T. J., & Lewis, J. A. (2018) · Advanced Materials · doi:10.1002/adma.201706164 · Cited by 768
Strain-programmable fiber-based artificial muscle
Kanik, M., Orguc, S., Varnavides, G., Kim, J., Benavides, T., Gonzalez, D., Akintilo, T., Tasan, C. C., Chandrakasan, A. P., Fink, Y., et al. (2019) · Science · doi:10.1126/science.aaw2502 · Cited by 468
Shape-memory polymers for multiple applications in the materials world
Pilate, F., Toncheva, A., Dubois, P., & Raquez, J.-M. (2016) · European Polymer Journal · doi:10.1016/j.eurpolymj.2016.05.004 · Cited by 332
Metadata
- Authors
- Hou, W., Wang, J., & Lv, J.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2023-03-06
- Volume
- 35
- Issue
- 16
- Pages
- e2211800-e2211800
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W4321473959
- Cited by
- 188
- References
- 4
- FWCI
- 18.49
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.