The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Advances in Interfaces between Li Metal Anode and Electrolyte
Abstract
Lithium metal has been considered as one of the most promising anode materials in high‐energy‐density rechargeable batteries due to its extremely high specific capacity and very low reduction potential of all possible candidates. However, the mysterious interfacial phenomena of lithium metal anode in long‐term cycles, especially Li dendrite formation and low Coulombic efficiency, have greatly plagued the practical applications of Li metal in secondary batteries. The complex interface between Li metal and electrolyte plays a very important role in regulating Li deposition and enhancing the cycling stability of a full battery. In this review, recent advances in interfacial science and engineering are summarized to afford a fundamental understanding in Li deposition behavior and present design principles in constructing robust interface to stabilize Li metal anode in a working battery. Further investigations and directions are also included to promote the exploration of Li metal anodes. In particular, the rational combination of different Li metal protection strategies is strongly commended for practically applying Li metal anode in high‐energy‐density rechargeable batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Electrolytes and Interphases in Li-Ion Batteries and Beyond
Xu, K. (2014) · Chemical Reviews · doi:10.1021/cr500003w · Cited by 5,566
“Water-in-salt” electrolyte enables high-voltage aqueous lithium-ion chemistries
Suo, L., Borodin, O., Gao, T., Olguin, M., Ho, J., Fan, X., Luo, C., Wang, C., & Xu, K. (2015) · Science · doi:10.1126/science.aab1595 · Cited by 3,821
High rate and stable cycling of lithium metal anode
Qian, J., Henderson, W. A., Xu, W., Bhattacharya, P., Engelhard, M., Borodin, O., & Zhang, J.-G. (2015) · Nature Communications · doi:10.1038/ncomms7362 · Cited by 2,561
Michan, A. L., Parimalam, B. S., Leskes, M., Kerber, R. N., Yoon, T., Grey, C. P., & Lucht, B. L. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b02282 · Cited by 541
Cited by
Recent Advances in Energy Chemistry between Solid-State Electrolyte and Safe Lithium-Metal Anodes
Cheng, X.-B., Zhao, C.-Z., Yao, Y.-X., Liu, H., & Zhang, Q. (2019) · Chem · doi:10.1016/j.chempr.2018.12.002 · Cited by 874
Self-citationArtificial Interphases for Highly Stable Lithium Metal Anode
Xu, R., Cheng, X.-B., Yan, C., Zhang, X.-Q., Xiao, Y., Zhao, C.-Z., Huang, J.-Q., & Zhang, Q. (2019) · Matter · doi:10.1016/j.matt.2019.05.016 · Cited by 721
Self-citationMaterials Design for Rechargeable Metal-Air Batteries
Wang, H.-F., & Xu, Q. (2019) · Matter · doi:10.1016/j.matt.2019.05.008 · Cited by 580
Review on Polymer-Based Composite Electrolytes for Lithium Batteries
Yao, P., Yu, H., Ding, Z., Liu, Y., Lu, J., Lavorgna, M., Wu, J., & Liu, X. (2019) · Frontiers in Chemistry · doi:10.3389/fchem.2019.00522 · Cited by 494
Polymers in Lithium‐Ion and Lithium Metal Batteries
Li, J., Cai, Y., Wu, H., Yu, Z., Yan, X., Zhang, Q., Gao, T. Z., Liu, K., Jia, X., & Bao, Z. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202003239 · Cited by 348
Self-citation
Metadata
- Authors
- Zhang, X., Cheng, X., & Zhang, Q.
- Venue
- Advanced Materials Interfaces
- Publisher
- Wiley
- Published
- 2017-12
- Volume
- 5
- Issue
- 2
- ISSN
- 2196-7350 (ISSN-L)
- OpenAlex
- W2775814735
- Cited by
- 287
- References
- 6
- FWCI
- 11.64
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Advances in Interfaces between Li Metal Anode and Electrolyte. https://app.cochat.ai/papers/10.1002/admi.201701097
- The paper
- Zhang, X., Cheng, X., & Zhang, Q. (2018). Advances in Interfaces between Li Metal Anode and Electrolyte. Advanced Materials Interfaces. https://doi.org/10.1002/admi.201701097
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
