The DOI matches its Crossref record; 143 of the 143 references it cites were found in a registry or an index.
Energy Level Alignment at Interfaces in Metal Halide Perovskite Solar Cells
Abstract
The rapid progress of organic–inorganic metal halide perovskite solar cells (PSCs) has attracted broad interest in photovoltaic community. A typical PSC consists of anode/cathode, a perovskite layer as absorber, and carrier transport layer(s) (electron/hole transport layer(s)), which are stacked together, resulting in multi‐interfaces between these layers. Charge extraction and transport in these solar cell devices are strongly influenced by the interfaces and in particular the energy level alignment (ELA). It is the synergy of multiple interfaces and bulk films embedded in the cell architecture that has led to the extraordinary success of PSCs. Here, the authors review the progress of the studies on energy level alignment in PSCs, including several sections: methods for deriving ELA, semiconductor type of perovskite, bottom layer–dependent energy level shift of perovskite, density of states–governed ELA, ELA for specific interfaces, instability‐induced ELA variation, and defects and ion migration–induced ELA variation. Perspective and outlook for precisely determining ELA, designing the device architecture, and fabricating high performance PSCs are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Efficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Interface engineering of highly efficient perovskite solar cells
Zhou, H., Chen, Q., Li, G., Luo, S., Song, T.-B., Duan, H.-S., Hong, Z., You, J., Liu, Y., & Yang, Y. (2014) · Science · doi:10.1126/science.1254050 · Cited by 6,632
Compositional engineering of perovskite materials for high-performance solar cells
Jeon, N. J., Noh, J. H., Yang, W. S., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Nature · doi:10.1038/nature14133 · Cited by 6,431
Iodide management in formamidinium-lead-halide–based perovskite layers for efficient solar cells
Yang, W. S., Park, B.-W., Jung, E. H., Jeon, N. J., Kim, Y. C., Lee, D. U., Shin, S. S., Seo, J., Kim, E. K., Noh, J. H., et al. (2017) · Science · doi:10.1126/science.aan2301 · Cited by 5,445
Photoinduced Electron Transfer from a Conducting Polymer to Buckminsterfullerene
Sariciftci, N. S., Smilowitz, L., Heeger, A. J., & Wudl, F. (1992) · Science · doi:10.1126/science.258.5087.1474 · Cited by 4,273
Eperon, G. E., Stranks, S. D., Menelaou, C., Johnston, M. B., Herz, L. M., & Snaith, H. J. (2014) · Energy & Environmental Science · doi:10.1039/c3ee43822h · Cited by 4,140
High Charge Carrier Mobilities and Lifetimes in Organolead Trihalide Perovskites
Wehrenfennig, C., Eperon, G. E., Johnston, M. B., Snaith, H. J., & Herz, L. M. (2014) · Advanced Materials · doi:10.1002/adma.201305172 · Cited by 3,239
Research works printed but not linked: 85
- 10.1002/admi.201600970 · doi:10.1002/admi.201600970
- 10.1039/C5EE03620H · doi:10.1039/c5ee03620h
- 10.1002/pip.2978 · doi:10.1002/pip.2978
- Jiang Y., 2018, Adv. Funct. Mater., 28, 13
- 10.1021/acsomega.7b00538 · doi:10.1021/acsomega.7b00538
- 10.1016/j.solmat.2016.05.011 · doi:10.1016/j.solmat.2016.05.011
- 10.1016/j.orgel.2006.07.006 · doi:10.1016/j.orgel.2006.07.006
- 10.1016/S0040-6090(01)01094-X · doi:10.1016/s0040-6090(01)01094-x
- 10.1016/j.cap.2012.06.021 · doi:10.1016/j.cap.2012.06.021
- 10.1088/0022-3727/48/39/395103 · doi:10.1088/0022-3727/48/39/395103
- 10.1016/S0022-2313(99)00230-6 · doi:10.1016/s0022-2313(99)00230-6
- 10.1016/j.apsusc.2017.01.065 · doi:10.1016/j.apsusc.2017.01.065
- 10.1039/b902492c · doi:10.1039/b902492c
- 10.1039/b922385a · doi:10.1039/b922385a
- 10.1016/j.orgel.2012.09.025 · doi:10.1016/j.orgel.2012.09.025
- 10.1016/j.orgel.2007.04.010 · doi:10.1016/j.orgel.2007.04.010
- 10.1088/1361-648X/aa5a6c · doi:10.1088/1361-648x/aa5a6c
- 10.1063/1.2806938 · doi:10.1063/1.2806938
- 10.1063/1.1406967 · doi:10.1063/1.1406967
- 10.1039/C6CP02737G · doi:10.1039/c6cp02737g
- 10.1063/1.3611392 · doi:10.1063/1.3611392
- 10.1063/1.1506205 · doi:10.1063/1.1506205
- 10.1063/1.1632532 · doi:10.1063/1.1632532
- 10.1063/1.4722802 · doi:10.1063/1.4722802
- 10.1002/adfm.201301315 · doi:10.1002/adfm.201301315
- 10.1021/ar900247p · doi:10.1021/ar900247p
- 10.1002/smtd.201700295 · doi:10.1002/smtd.201700295
- 10.1007/s00216-014-7659-1 · doi:10.1007/s00216-014-7659-1
- 10.1016/j.cplett.2012.04.058 · doi:10.1016/j.cplett.2012.04.058
- 10.1063/1.4860055 · doi:10.1063/1.4860055
- 10.1039/C0JM02349C · doi:10.1039/c0jm02349c
- 10.1021/acs.jpclett.7b02562 · doi:10.1021/acs.jpclett.7b02562
- 10.1021/acsami.7b12586 · doi:10.1021/acsami.7b12586
- 10.1039/C4RA03820G · doi:10.1039/c4ra03820g
- 10.1016/j.orgel.2015.07.028 · doi:10.1016/j.orgel.2015.07.028
- 10.1039/C5TA01343G · doi:10.1039/c5ta01343g
- 10.1039/C5TA05989E · doi:10.1039/c5ta05989e
- 10.1021/acsami.5b10555 · doi:10.1021/acsami.5b10555
- 10.1016/j.solmat.2015.12.033 · doi:10.1016/j.solmat.2015.12.033
- 10.1039/C4CP03842H · doi:10.1039/c4cp03842h
- 10.1021/acs.jpcb.7b03921 · doi:10.1021/acs.jpcb.7b03921
- 10.1039/C6TA00989A · doi:10.1039/c6ta00989a
- 10.1039/C6NR05917A · doi:10.1039/c6nr05917a
- 10.1021/acsami.5b04334 · doi:10.1021/acsami.5b04334
- 10.1063/1.4802276 · doi:10.1063/1.4802276
- 10.1038/srep14250 · doi:10.1038/srep14250
- 10.1103/PhysRevB.87.045432 · doi:10.1103/physrevb.87.045432
- 10.1002/adma.200502752 · doi:10.1002/adma.200502752
- 10.7567/APEX.9.122301 · doi:10.7567/apex.9.122301
- 10.3390/molecules21040542 · doi:10.3390/molecules21040542
- 10.1039/C6RA07068J · doi:10.1039/c6ra07068j
- 10.3390/en10050599 · doi:10.3390/en10050599
- 10.1016/j.orgel.2014.12.002 · doi:10.1016/j.orgel.2014.12.002
- 10.1016/0038-1098(92)90098-T · doi:10.1016/0038-1098(92)90098-t
- 10.1021/cm500594u · doi:10.1021/cm500594u
- 10.1038/srep40267 · doi:10.1038/srep40267
- 10.1002/admi.201600117 · doi:10.1002/admi.201600117
- 10.1039/C6TA03658A · doi:10.1039/c6ta03658a
- 10.1021/acsnano.6b01904 · doi:10.1021/acsnano.6b01904
- 10.1088/0022-3727/31/1/005 · doi:10.1088/0022-3727/31/1/005
- 10.1016/j.synthmet.2012.10.005 · doi:10.1016/j.synthmet.2012.10.005
- 10.1016/j.cplett.2009.04.024 · doi:10.1016/j.cplett.2009.04.024
- 10.1038/srep07787 · doi:10.1038/srep07787
- 10.1039/C6CP07592D · doi:10.1039/c6cp07592d
- 10.1002/aenm.201100234 · doi:10.1002/aenm.201100234
- 10.1002/adfm.201302477 · doi:10.1002/adfm.201302477
- 10.1063/1.3026741 · doi:10.1063/1.3026741
- 10.1021/acsami.6b10898 · doi:10.1021/acsami.6b10898
- 10.1002/cnma.201500223 · doi:10.1002/cnma.201500223
- 10.1038/s41563-018-0022-8 · doi:10.1038/s41563-018-0022-8
- 10.1039/C7TA04128D · doi:10.1039/c7ta04128d
- 10.1021/nl302509q · doi:10.1021/nl302509q
- 10.1021/ja403344s · doi:10.1021/ja403344s
- 10.1063/1.4994085 · doi:10.1063/1.4994085
- 10.1021/acsenergylett.7b00212 · doi:10.1021/acsenergylett.7b00212
- 10.1016/j.joule.2017.10.019 · doi:10.1016/j.joule.2017.10.019
- 10.1021/acs.jpcc.6b05775 · doi:10.1021/acs.jpcc.6b05775
- 10.1002/aenm.201501994 · doi:10.1002/aenm.201501994
- 10.1063/1.4953834 · doi:10.1063/1.4953834
- 10.1063/1.4963760 · doi:10.1063/1.4963760
- 10.1002/aenm.201701981 · doi:10.1002/aenm.201701981
- 10.1063/1.4889844 · doi:10.1063/1.4889844
- 10.1021/acs.jpcc.6b02942 · doi:10.1021/acs.jpcc.6b02942
- 10.1063/1.4944591 · doi:10.1063/1.4944591
- 10.1002/admi.201400528 · doi:10.1002/admi.201400528
Cited by
Recent Progresses on Defect Passivation toward Efficient Perovskite Solar Cells
Gao, F., Zhao, Y., Zhang, X., & You, J. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201902650 · Cited by 782
Absolute energy level positions in tin- and lead-based halide perovskites
Tao, S., Schmidt, I., Brocks, G., Jiang, J., Tranca, I., Meerholz, K., & Olthof, S. (2019) · Nature Communications · doi:10.1038/s41467-019-10468-7 · Cited by 734
Titanium-carbide MXenes for work function and interface engineering in perovskite solar cells
Agresti, A., Pazniak, A., Pescetelli, S., Di Vito, A., Rossi, D., Pecchia, A., Auf der Maur, M., Liedl, A., Larciprete, R., Kuznetsov, D. V., et al. (2019) · Nature Materials · doi:10.1038/s41563-019-0478-1 · Cited by 684
Halide Perovskites: Is It All about the Interfaces?
Schulz, P., Cahen, D., & Kahn, A. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00558 · Cited by 558
Materials and Methods for Interface Engineering toward Stable and Efficient Perovskite Solar Cells
Chen, J., & Park, N.-G. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c01240 · Cited by 521
Metadata
- Authors
- Wang, S., Sakurai, T., Wen, W., & Qi, Y.
- Venue
- Advanced Materials Interfaces
- Publisher
- Wiley
- Published
- 2018-07-30
- Volume
- 5
- Issue
- 22
- ISSN
- 2196-7350 (ISSN-L)
- OpenAlex
- W2887939407
- Cited by
- 350
- References
- 143
- FWCI
- 12.80
- Type
- journal article
- Language
- en
- Update notices
- correction (2020-03-20)
- Open access
- closed
- Funders
- Okinawa Institute of Science and Technology Graduate University
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Energy Level Alignment at Interfaces in Metal Halide Perovskite Solar Cells. https://app.cochat.ai/papers/10.1002/admi.201800260
- The paper
- Wang, S., Sakurai, T., Wen, W., & Qi, Y. (2018). Energy Level Alignment at Interfaces in Metal Halide Perovskite Solar Cells. Advanced Materials Interfaces. https://doi.org/10.1002/admi.201800260
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.