The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
3D‐Printed Mechanical Metamaterials with High Energy Absorption
Abstract
Recently, 3D metamaterials have been achieved with inaccessible mechanical properties in natural materials such as negative Poisson's ratio, stiffness, and thermal expansion coefficient. While most of the developed metamaterials are with engineerable deformation evolution of structures, few studies have revealed their potential in energy absorption due to the limited mechanical properties of 3D‐printed constituent materials and inevitable structural defects induced by the manufacturing process. Herein, an approach is proposed for creating 3D metamaterials of auxetic composite lattices via laser‐sintering of carbon nanotubes reinforced nanocomposites, which provide a platform for the design and manufacturing of systems with programmable energy absorption capability. The optimization of constituent material and structural design enables the improvement of energy absorption performance across multiple scales. The energy absorption capacity of auxetic metamaterials was exponentially scaled with the relative density with the order of 2.5–3. The rationally topologized auxetic metamaterials exhibit a combination of high specific densification strength (0.0195 MPa kg−1 m−3), ultrahigh energy absorption capacity (6.29 MJ m−3), and excellent specific energy absorption (20.42 J g−1). Impressively, this group of auxetic metamaterials possesses the advantageous specific energy absorption approaching that of titanium alloy foams as well as over a broad range of materials including plastic foams, aluminum alloy foams, and other 3D‐printed lightweight structures.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cellular Solids: Structure and Properties
Gibson, L. J., & Ashby, M. F. (1997) · Cambridge University Press eBooks · doi:10.1017/cbo9781139878326 · Cited by 5,512
Polymer nanotechnology: Nanocomposites
Paul, D. R., & Robeson, L. M. (2008) · Polymer · doi:10.1016/j.polymer.2008.04.017 · Cited by 3,317
3D printing of high-strength aluminium alloys
Martin, J. H., Yahata, B. D., Hundley, J. M., Mayer, J. A., Schaedler, T. A., & Pollock, T. M. (2017) · Nature · doi:10.1038/nature23894 · Cited by 2,950
Poisson's ratio and modern materials
Greaves, G. N., Greer, A. L., Lakes, R. S., & Rouxel, T. (2011) · Nature Materials · doi:10.1038/nmat3134 · Cited by 2,362
Ultralight, ultrastiff mechanical metamaterials
Zheng, X., Lee, H., Weisgraber, T. H., Shusteff, M., DeOtte, J., Duoss, E. B., Kuntz, J. D., Biener, M. M., Ge, Q., Jackson, J. A., et al. (2014) · Science · doi:10.1126/science.1252291 · Cited by 2,308
Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies
Murr, L. E., Gaytan, S. M., Ramirez, D. A., Martinez, E., Hernandez, J., Amato, K. N., Shindo, P. W., Medina, F. R., & Wicker, R. B. (2012) · Journal of Materials Science & Technology · doi:10.1016/s1005-0302(12)60016-4 · Cited by 1,686
3D‐Printing of Lightweight Cellular Composites
Compton, B. G., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201401804 · Cited by 1,626
Strong, lightweight, and recoverable three-dimensional ceramic nanolattices
Meza, L. R., Das, S., & Greer, J. R. (2014) · Science · doi:10.1126/science.1255908 · Cited by 1,498
Three-dimensional mechanical metamaterials with a twist
Frenzel, T., Kadic, M., & Wegener, M. (2017) · Science · doi:10.1126/science.aao4640 · Cited by 1,103
Probing the mechanisms of large Purcell enhancement in plasmonic nanoantennas
Akselrod, G. M., Argyropoulos, C., Hoang, T. B., Ciracì, C., Fang, C., Huang, J., Smith, D. R., & Mikkelsen, M. H. (2014) · Nature Photonics · doi:10.1038/nphoton.2014.228 · Cited by 1,084
Cited by
Recent Progress on Polymer Materials for Additive Manufacturing
Tan, L. J., Zhu, W., & Zhou, K. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202003062 · Cited by 740
Self-citationMechanical metamaterials and beyond
Jiao, P., Mueller, J., Raney, J. R., Zheng, X., & Alavi, A. H. (2023) · Nature Communications · doi:10.1038/s41467-023-41679-8 · Cited by 733
Recent Advances on High‐Entropy Alloys for 3D Printing
Han, C., Fang, Q., Shi, Y., Tor, S. B., Chua, C. K., & Zhou, K. (2020) · Advanced Materials · doi:10.1002/adma.201903855 · Cited by 486
Self-citationWu, Y., Fang, J., Wu, C., Li, C., Sun, G., & Li, Q. (2023) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2023.108102 · Cited by 440
From Topology Optimization Design to Additive Manufacturing: Today’s Success and Tomorrow’s Roadmap
Meng, L., Zhang, W., Quan, D., Shi, G., Tang, L., Hou, Y., Breitkopf, P., Zhu, J., & Gao, T. (2020) · Archives of Computational Methods in Engineering · doi:10.1007/s11831-019-09331-1 · Cited by 402
Deep Learning in Mechanical Metamaterials: From Prediction and Generation to Inverse Design
Zheng, X., Zhang, X., Chen, T., & Watanabe, I. (2023) · Advanced Materials · doi:10.1002/adma.202302530 · Cited by 372
Xin, X., Liu, L., Liu, Y., & Leng, J. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202004226 · Cited by 319
Advances in 3D/4D printing of mechanical metamaterials: From manufacturing to applications
Zhou, X., Ren, L., Song, Z., Li, G., Zhang, J., Li, B., Wu, Q., Li, W., Ren, L., & Liu, Q. (2023) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2023.110585 · Cited by 277
Reversible energy absorbing meta-sandwiches by FDM 4D printing
Bodaghi, M., Serjouei, A., Zolfagharian, A., Fotouhi, M., Rahman, H., & Durand, D. (2020) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2020.105451 · Cited by 268
Additive manufacturing of polymeric composites from material processing to structural design
Yuan, S., Li, S., Zhu, J., & Tang, Y. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.108903 · Cited by 267
Self-citation
Metadata
- Authors
- Yuan, S., Chua, C. K., & Zhou, K.
- Venue
- Advanced Materials Technologies
- Publisher
- Wiley
- Published
- 2018-12-04
- Volume
- 4
- Issue
- 3
- ISSN
- 2365-709X (ISSN-L)
- OpenAlex
- W2903486599
- Cited by
- 380
- References
- 35
- FWCI
- 13.11
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.