The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
3D‐Printed Mechanical Metamaterials with High Energy Absorption
Abstract
Recently, 3D metamaterials have been achieved with inaccessible mechanical properties in natural materials such as negative Poisson's ratio, stiffness, and thermal expansion coefficient. While most of the developed metamaterials are with engineerable deformation evolution of structures, few studies have revealed their potential in energy absorption due to the limited mechanical properties of 3D‐printed constituent materials and inevitable structural defects induced by the manufacturing process. Herein, an approach is proposed for creating 3D metamaterials of auxetic composite lattices via laser‐sintering of carbon nanotubes reinforced nanocomposites, which provide a platform for the design and manufacturing of systems with programmable energy absorption capability. The optimization of constituent material and structural design enables the improvement of energy absorption performance across multiple scales. The energy absorption capacity of auxetic metamaterials was exponentially scaled with the relative density with the order of 2.5–3. The rationally topologized auxetic metamaterials exhibit a combination of high specific densification strength (0.0195 MPa kg−1 m−3), ultrahigh energy absorption capacity (6.29 MJ m−3), and excellent specific energy absorption (20.42 J g−1). Impressively, this group of auxetic metamaterials possesses the advantageous specific energy absorption approaching that of titanium alloy foams as well as over a broad range of materials including plastic foams, aluminum alloy foams, and other 3D‐printed lightweight structures.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cellular Solids: Structure and Properties
Gibson, L. J., & Ashby, M. F. (1997) · Cambridge University Press eBooks · doi:10.1017/cbo9781139878326 · Cited by 5,512
Polymer nanotechnology: Nanocomposites
Paul, D. R., & Robeson, L. M. (2008) · Polymer · doi:10.1016/j.polymer.2008.04.017 · Cited by 3,317
3D printing of high-strength aluminium alloys
Martin, J. H., Yahata, B. D., Hundley, J. M., Mayer, J. A., Schaedler, T. A., & Pollock, T. M. (2017) · Nature · doi:10.1038/nature23894 · Cited by 2,950
Poisson's ratio and modern materials
Greaves, G. N., Greer, A. L., Lakes, R. S., & Rouxel, T. (2011) · Nature Materials · doi:10.1038/nmat3134 · Cited by 2,362
Ultralight, ultrastiff mechanical metamaterials
Zheng, X., Lee, H., Weisgraber, T. H., Shusteff, M., DeOtte, J., Duoss, E. B., Kuntz, J. D., Biener, M. M., Ge, Q., Jackson, J. A., et al. (2014) · Science · doi:10.1126/science.1252291 · Cited by 2,308
Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies
Murr, L. E., Gaytan, S. M., Ramirez, D. A., Martinez, E., Hernandez, J., Amato, K. N., Shindo, P. W., Medina, F. R., & Wicker, R. B. (2012) · Journal of Materials Science & Technology · doi:10.1016/s1005-0302(12)60016-4 · Cited by 1,686
3D‐Printing of Lightweight Cellular Composites
Compton, B. G., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201401804 · Cited by 1,626
Strong, lightweight, and recoverable three-dimensional ceramic nanolattices
Meza, L. R., Das, S., & Greer, J. R. (2014) · Science · doi:10.1126/science.1255908 · Cited by 1,498
Three-dimensional mechanical metamaterials with a twist
Frenzel, T., Kadic, M., & Wegener, M. (2017) · Science · doi:10.1126/science.aao4640 · Cited by 1,103
Probing the mechanisms of large Purcell enhancement in plasmonic nanoantennas
Akselrod, G. M., Argyropoulos, C., Hoang, T. B., Ciracì, C., Fang, C., Huang, J., Smith, D. R., & Mikkelsen, M. H. (2014) · Nature Photonics · doi:10.1038/nphoton.2014.228 · Cited by 1,084
Rafi, H. K., Karthik, N. V., Gong, H., Starr, T. L., & Stucker, B. E. (2013) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-013-0658-0 · Cited by 987
3D Soft Metamaterials with Negative Poisson's Ratio
Babaee, S., Shim, J., Weaver, J. C., Chen, E. R., Patel, N., & Bertoldi, K. (2013) · Advanced Materials · doi:10.1002/adma.201301986 · Cited by 856
Mechanical evaluation of porous titanium (Ti6Al4V) structures with electron beam melting (EBM)
Parthasarathy, J., Starly, B., Raman, S., & Christensen, A. (2010) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2009.10.006 · Cited by 816
Maskery, I., Aboulkhair, N. T., Aremu, A. O., Tuck, C. J., Ashcroft, I. A., Wildman, R. D., & Hague, R. J. M. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2016.06.013 · Cited by 706
Approaching theoretical strength in glassy carbon nanolattices
Bauer, J., Schroer, A., Schwaiger, R., & Kraft, O. (2016) · Nature Materials · doi:10.1038/nmat4561 · Cited by 689
Phononic crystals and acoustic metamaterials
Lu, M.-H., Feng, L., & Chen, Y.-F. (2009) · Materials Today · doi:10.1016/s1369-7021(09)70315-3 · Cited by 673
Functional Meta-Optics and Nanophotonics Governed by Mie Resonances
Kruk, S., & Kivshar, Y. (2017) · ACS Photonics · doi:10.1021/acsphotonics.7b01038 · Cited by 643
Ning, F., Cong, W., Hu, Y., & Wang, H. (2017) · Journal of Composite Materials · doi:10.1177/0021998316646169 · Cited by 632
Compressive failure modes and energy absorption in additively manufactured double gyroid lattices
Maskery, I., Aboulkhair, N. T., Aremu, A. O., Tuck, C. J., & Ashcroft, I. A. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.04.003 · Cited by 575
Lightweight Mechanical Metamaterials with Tunable Negative Thermal Expansion
Wang, Q., Jackson, J. A., Ge, Q., Hopkins, J. B., Spadaccini, C. M., & Fang, N. X. (2016) · Physical Review Letters · doi:10.1103/physrevlett.117.175901 · Cited by 481
Choy, S. Y., Sun, C.-N., Leong, K. F., & Wei, J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.06.006 · Cited by 481
Mohan, N., Senthil, P., Vinodh, S., & Jayanth, N. (2017) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1274490 · Cited by 457
3D printed reversible shape changing components with stimuli responsive materials
Mao, Y., Ding, Z., Yuan, C., Ai, S., Isakov, M., Wu, J., Wang, T., Dunn, M. L., & Qi, H. J. (2016) · Scientific Reports · doi:10.1038/srep24761 · Cited by 348
Lewicki, J. P., Rodriguez, J. N., Zhu, C., Worsley, M. A., Wu, A. S., Kanarska, Y., Horn, J. D., Duoss, E. B., Ortega, J. M., Elmer, W., et al. (2017) · Scientific Reports · doi:10.1038/srep43401 · Cited by 318
Three‐Dimensional Printing of Elastomeric, Cellular Architectures with Negative Stiffness
Duoss, E. B., Weisgraber, T. H., Hearon, K., Zhu, C., Small, W., Metz, T. R., Vericella, J. J., Barth, H. D., Kuntz, J. D., Maxwell, R. S., et al. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400451 · Cited by 316
Rotational 3D printing of damage-tolerant composites with programmable mechanics
Raney, J. R., Compton, B. G., Mueller, J., Ober, T. J., Shea, K., & Lewis, J. A. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1715157115 · Cited by 301
Yuan, S., Shen, F., Bai, J., Chua, C. K., Wei, J., & Zhou, K. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.01.098 · Cited by 295
Self-citation3D printed hierarchical honeycombs with shape integrity under large compressive deformations
Chen, Y., Li, T., Jia, Z., Scarpa, F., Yao, C.-W., & Wang, L. (2018) · Materials & Design · doi:10.1016/j.matdes.2017.10.028 · Cited by 284
Nanocomposites: issues at the interface
Wagner, H. D., & Vaia, R. A. (2004) · Materials Today · doi:10.1016/s1369-7021(04)00507-3 · Cited by 259
Architected Lattices with High Stiffness and Toughness via Multicore–Shell 3D Printing
Mueller, J., Raney, J. R., Shea, K., & Lewis, J. A. (2018) · Advanced Materials · doi:10.1002/adma.201705001 · Cited by 216
Zhang, X., Yao, J., Liu, B., Yan, J., Lu, L., Li, Y., Gao, H., & Li, X. (2018) · Nano Letters · doi:10.1021/acs.nanolett.8b01241 · Cited by 179
Brunet, T., Leng, J., & Mondain‐Monval, O. (2013) · Science · doi:10.1126/science.1241727 · Cited by 152
Shuai, C., Gao, C., Nie, Y. M., Hu, H., Zhou, Y., & Peng, S. (2011) · Nanotechnology · doi:10.1088/0957-4484/22/28/285703 · Cited by 136
Yuan, S., Bai, J., Chua, C., et al. (2016) · Polymers · doi:10.3390/polym8100370 · Cited by 126
Self-citationYuan, S., Bai, J., Chua, C. K., et al. (2016) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2016.09.002 · Cited by 106
Self-citation
Cited by
Recent Progress on Polymer Materials for Additive Manufacturing
Tan, L. J., Zhu, W., & Zhou, K. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202003062 · Cited by 740
Self-citationMechanical metamaterials and beyond
Jiao, P., Mueller, J., Raney, J. R., Zheng, X., & Alavi, A. H. (2023) · Nature Communications · doi:10.1038/s41467-023-41679-8 · Cited by 733
Recent Advances on High‐Entropy Alloys for 3D Printing
Han, C., Fang, Q., Shi, Y., Tor, S. B., Chua, C. K., & Zhou, K. (2020) · Advanced Materials · doi:10.1002/adma.201903855 · Cited by 486
Self-citationWu, Y., Fang, J., Wu, C., Li, C., Sun, G., & Li, Q. (2023) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2023.108102 · Cited by 440
From Topology Optimization Design to Additive Manufacturing: Today’s Success and Tomorrow’s Roadmap
Meng, L., Zhang, W., Quan, D., Shi, G., Tang, L., Hou, Y., Breitkopf, P., Zhu, J., & Gao, T. (2020) · Archives of Computational Methods in Engineering · doi:10.1007/s11831-019-09331-1 · Cited by 402
Metadata
- Authors
- Yuan, S., Chua, C. K., & Zhou, K.
- Venue
- Advanced Materials Technologies
- Publisher
- Wiley
- Published
- 2018-12-04
- Volume
- 4
- Issue
- 3
- ISSN
- 2365-709X (ISSN-L)
- OpenAlex
- W2903486599
- Cited by
- 380
- References
- 35
- FWCI
- 13.11
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.