The DOI matches its Crossref record; 43 of the 43 references it cites were found in a registry or an index.
State‐of‐the‐Art and Future Challenges of UV Curable Polymer‐Based Smart Materials for Printing Technologies
Abstract
The one‐step printing of fully functional electronic devices is one of the main goals of additive manufacturing. In general, this approach is increasingly growing, being one of the key developments additive manufacturing processes based on ultraviolet curing. The main reasons for this increasing interest in UV curing based technologies are its advantages, such as fast curing at room temperature, space and energy efficiency, high‐resolution patterns, and solvent‐free formulations. Despite the important developments, some challenges remain with respect to improving UV curing process and, in particular, to obtain smart UV curable materials, many times based on the inclusion of specific nanoparticles in a UV curable polymer matrix. Thus, this paper reviews the recent developments in UV curable smart materials for printing technologies focusing on both materials and processes. The curing mechanisms and the main materials used in UV photocurable resins are reviewed as well as the main smart and multifunctional materials obtained based on them. Finally, a summary of the main achievement and the future needs are indicated. This review represents therefore a landmark for the development of a new generation of UV curable smart and multifunctional materials and solutions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electroactive phases of poly(vinylidene fluoride): Determination, processing and applications
Martins, P., Lopes, A. C., & Lanceros-Mendez, S. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.07.006 · Cited by 3,494
Self-citationDispersion and functionalization of carbon nanotubes for polymer-based nanocomposites: A review
Ma, P.-C., Siddiqui, N. A., Marom, G., & Kim, J.-K. (2010) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.07.003 · Cited by 3,414
3D printing of polymer matrix composites: A review and prospective
Wang, X., Jiang, M., Zhou, Z., Gou, J., & Hui, D. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.11.034 · Cited by 3,325
Fabrication and processing of polymer solar cells: A review of printing and coating techniques
Krebs, F. C. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.10.004 · Cited by 3,260
A review on stereolithography and its applications in biomedical engineering
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,457
Review of progress in shape-memory polymers
Liu, C., Qin, H., & Mather, P. T. (2007) · Journal of Materials Chemistry · doi:10.1039/b615954k · Cited by 1,942
3D printing with polymers: Challenges among expanding options and opportunities
Stansbury, J. W., & Idacavage, M. J. (2016) · Dental Materials · doi:10.1016/j.dental.2015.09.018 · Cited by 1,732
Wollschlaeger, M., Sauter, T., & Jasperneite, J. (2017) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2017.2649104 · Cited by 1,726
Electrochromic organic and polymeric materials for display applications
Mortimer, R. J., Dyer, A. L., & Reynolds, J. R. (2006) · Displays · doi:10.1016/j.displa.2005.03.003 · Cited by 1,100
Continuous-flow lithography for high-throughput microparticle synthesis
Dendukuri, D., Pregibon, D. C., Collins, J., Hatton, T. A., & Doyle, P. S. (2006) · Nature Materials · doi:10.1038/nmat1617 · Cited by 1,040
Self-healing materials: a review
Wool, R. P. (2008) · Soft Matter · doi:10.1039/b711716g · Cited by 1,033
The world of smart healable materials
Murphy, E. B., & Wudl, F. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.10.006 · Cited by 670
Photoinitiators for Polymer Synthesis: Scope, Reactivity and Efficiency
Fouassier, J. P., & Lalevée, J. (2012) · Wiley eBooks · doi:10.1002/9783527648245 · Cited by 563
“Smart” Materials Based on Cellulose: A Review of the Preparations, Properties, and Applications
Qiu, X., & Hu, S. (2013) · Materials · doi:10.3390/ma6030738 · Cited by 509
The use of UV irradiation in polymerization
Decker, C. (1998) · Polymer International · doi:10.1002/(sici)1097-0126(199802)45:2<133::aid-pi969>3.0.co;2-f · Cited by 423
Cationic polymerization — Iodonium and sulfonium salt photoinitiators
Crivello, J. V. (2005) · Advances in Polymer Science · doi:10.1007/bfb0024034 · Cited by 400
Curing of composite components by ultraviolet radiation: A review
Endruweit, A., Johnson, M. S., & Long, A. C. (2006) · Polymer Composites · doi:10.1002/pc.20166 · Cited by 276
Yu, K., Ritchie, A., Mao, Y., Dunn, M. L., & Qi, H. J. (2015) · Procedia IUTAM · doi:10.1016/j.piutam.2014.12.021 · Cited by 220
3D printing of tablets using inkjet with UV photoinitiation
Clark, E. A., Alexander, M. R., Irvine, D. J., Roberts, C. J., Wallace, M. J., Sharpe, S., Yoo, J., Hague, R. J. M., Tuck, C. J., & Wildman, R. D. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.06.085 · Cited by 207
PHOTOINITIATION, PHOTOPOLYMERIZATION, AND PHOTOCURING
Schoch, K. F. (1996) · IEEE Electrical Insulation Magazine · doi:10.1109/mei.1996.546285 · Cited by 200
A review: additive manufacturing for active electronic components
Saengchairat, N., Tran, T. A., & Chua, C. K. (2016) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1253181 · Cited by 195
Fundamentals of composites manufacturing: materials, methods and applications
Summerscales, J. (1991) · Composites Manufacturing · doi:10.1016/0956-7143(91)90160-i · Cited by 195
Polymer-based smart materials by printing technologies: Improving application and integration
Oliveira, J., Correia, V., Castro, H., Martins, P., & Lanceros-Mendez, S. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.03.012 · Cited by 168
Self-citationSmart materials: a review of capabilities and applications
Bogue, R. W. (2014) · Assembly Automation · doi:10.1108/aa-10-2013-094 · Cited by 148
Shi, S., Croutxé‐Barghorn, C., & Allonas, X. (2016) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2016.09.007 · Cited by 147
Advances in cationic photopolymerization
Sangermano, M. (2012) · Pure and Applied Chemistry · doi:10.1351/pac-con-12-04-11 · Cited by 145
PolyJet technology for product prototyping: Tensile strength and surface roughness properties
Cazón, A., Camo, P. M., & Matey, L. (2014) · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · doi:10.1177/0954405413518515 · Cited by 143
N‐alkoxy‐pyridinium and N‐alkoxy‐quinolinium salts as initiators for cationic photopolymerizations
Yağcı, Y., Kornowski, A., & Schnabel, W. (1992) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.1992.080300922 · Cited by 119
Review of basic chemistry of UV‐curing technology
Shukla, V., Bajpai, M., Singh, D., Singh, M., & Shukla, R. (2004) · Pigment & Resin Technology · doi:10.1108/03699420410560461 · Cited by 111
Synthesis and photopolymerization of norbornyl epoxidized linseed oil
Chen, J., Soucek, M. D., Simonsick, W. J., & Celikay, R. W. (2002) · Polymer · doi:10.1016/s0032-3861(02)00404-4 · Cited by 111
Smart Material Systems and MEMS
Varadan, V. K., Vinoy, K. J., & Gopalakrishnan, S. (2006) · Wiley eBooks · doi:10.1002/0470093633 · Cited by 91
3D inkjet-printed UV-curable inks for multi-functional electromagnetic applications
Saleh, E., Woolliams, P., Clarke, B., et al. (2016) · Additive manufacturing · doi:10.1016/j.addma.2016.10.002 · Cited by 90
Smart materials: a review of recent developments
Bogue, R. W. (2012) · Assembly Automation · doi:10.1108/01445151211198674 · Cited by 83
Unclonable security features for additive manufacturing
Ivanova, O., Elliott, A., Campbell, T. A., & Williams, C. B. (2014) · Additive manufacturing · doi:10.1016/j.addma.2014.07.001 · Cited by 65
Inkjet printing of UV-curable adhesive and dielectric inks for microfluidic devices
Hamad, E. M., Bilatto, S., Adly, N., Correa, D. S., Wolfrum, B. L., Schöning, M. J., Offenhäusser, A., & Yakushenko, A. (2015) · Lab on a Chip · doi:10.1039/c5lc01195g · Cited by 54
A flexible, self-healing sensor skin
Carlson, J., English, J. M., & Coe, D. J. (2006) · Smart Materials and Structures · doi:10.1088/0964-1726/15/5/n05 · Cited by 51
Novel polymeric support materials for jetting based additive manufacturing processes
Fahad, M., Dickens, P., & Gilbert, M. (2013) · Rapid Prototyping Journal · doi:10.1108/13552541311323245 · Cited by 49
Lee, J., Emon, O. F., Vatani, M., & Choi, J. (2017) · Smart Materials and Structures · doi:10.1088/1361-665x/aa5c70 · Cited by 47
Akhtar, S. R., Crivello, J. V., Lee, J. L., & Schmitt, M. (1990) · Chemistry of Materials · doi:10.1021/cm00012a027 · Cited by 43
Highly piezoresistive hybrid MEMS sensors
Thuau, D., Ayela, C., Poulin, P., et al. (2014) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2014.01.037 · Cited by 37
Synthesis and properties of UV-curable self-healing oligomer
Liu, R., Yang, X., Yuan, Y., Liu, J., & Liu, X. (2016) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2016.08.006 · Cited by 35
Iregui, Á., Irusta, L., Llorente, O., Martin, L., Calvo‐Correas, T., Eceiza, A., & González, A. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.07.026 · Cited by 30
Malucelli, G., Fioravanti, A., Francioso, L. N., Pascali, C. D., Signore, M. A., Carotta, M. C., Bonanno, A., & Duraccio, D. (2017) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2017.04.020 · Cited by 26
Cited by
Recent Progress on Polymer Materials for Additive Manufacturing
Tan, L. J., Zhu, W., & Zhou, K. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202003062 · Cited by 740
Additive manufacturing by digital light processing: a review
Chaudhary, R., Fabbri, P., Leoni, E., Mazzanti, F., Akbari, R., & Antonini, C. (2023) · Progress in Additive Manufacturing · doi:10.1007/s40964-022-00336-0 · Cited by 450
Vat photopolymerization 3D printing for advanced drug delivery and medical device applications
Xu, X., Awad, A., Robles-Martinez, P., Gaisford, S., Goyanes, A., & Basit, A. W. (2021) · Journal of Controlled Release · doi:10.1016/j.jconrel.2020.10.008 · Cited by 370
Printable Smart Materials and Devices: Strategies and Applications
Su, M., & Song, Y. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00303 · Cited by 312
Inkjet Printing and 3D Printing Strategies for Biosensing, Analytical, and Diagnostic Applications
Zub, K., Hoeppener, S., & Schubert, U. S. (2022) · Advanced Materials · doi:10.1002/adma.202105015 · Cited by 287
Metadata
- Authors
- Mendes‐Felipe, C., Oliveira, J., Etxebarria, I., Vilas‐Vilela, J. L., & Lanceros‐Mendez, S.
- Venue
- Advanced Materials Technologies
- Publisher
- Wiley
- Published
- 2019-01-11
- Volume
- 4
- Issue
- 3
- ISSN
- 2365-709X (ISSN-L)
- OpenAlex
- W2909743110
- Cited by
- 316
- References
- 43
- FWCI
- 14.56
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.