The DOI matches its Crossref record; 22 of the 22 references it cites were found in a registry or an index.
Blending polylactic acid with polyhydroxybutyrate: The effect on thermal, mechanical, and biodegradation properties
Open accessAbstract
Blends of polylactic acid (PLA) and polyhydroxybutyrate (PHB) at a number of different PLA/PHB weight ratios (100/0, 75/25, 50/50, 25/75, 0/100) have been prepared by melt compounding. The morphology, thermal properties, mechanical properties, and biodegradation behavior of these blends have been investigated. The results indicate that PLA/PHB blends are immiscible but exhibit molecular interaction. PHB is highly crystallizable, and it enhances the recrystallization of PLA and consequently increases the heat distortion temperature. Adding PLA to PHB improves the mechanical properties of PHB. In fact, blending with PHB is also a viable approach to improve the mechanical properties of PLA because the PLA/PHB 75/25 blend exhibits significantly improved tensile properties compared with pure PLA. This is due to the finely dispersed PHB crystals acting as a filler and nucleating agent in PLA. The biodegradability, studied by weight change measurement at room temperature, improved with increasing PHB content. © 2011 Wiley Periodicals, Inc. Adv Polym Techn 30: 67–79, 2011; View this article online at wileyonlinelibrary.com. DOI 10.1002/adv.20235
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An Overview of Polylactides as Packaging Materials
Auras, R., Harte, B., & Selke, S. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400043 · Cited by 3,454
Girois, S., Audouin, L., Jacques Verdu, C., Delprat, P., & Marot, G. (1996) · Cited by 2,213
Applications of life cycle assessment to NatureWorks™ polylactide (PLA) production
Vink, E. T. H., Rábago, K. R., Glassner, D. A., & Gruber, P. R. (2003) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(02)00372-5 · Cited by 1,092
Doi, Y., Kanesawa, Y., Kunioka, M., & Saito, T. (1990) · Macromolecules · doi:10.1021/ma00203a006 · Cited by 515
Avella, M., Martuscelli, E., & Raimo, M. (2000) · Journal of Materials Science · doi:10.1023/a:1004740522751 · Cited by 357
Miscibility, crystallization and melting of poly(3-hydroxybutyrate)/ poly(l-lactide) blends
Blümm, E., & Owen, A. J. (1995) · Polymer · doi:10.1016/0032-3861(95)90987-d · Cited by 289
The thermal degradation of poly(-(d)-β-hydroxybutyric acid): Part 2—Changes in molecular weight
Grassie, N., Murray, E. J., & Holmes, P. A. (1984) · Polymer Degradation and Stability · doi:10.1016/0141-3910(84)90075-2 · Cited by 270
Kunioka, M., & Doi, Y. (1990) · Macromolecules · doi:10.1021/ma00209a009 · Cited by 266
Furukawa, T., Sato, H., Murakami, R., Zhang, J., Duan, Y.-X., Noda, I., Ochiai, S., & Ozaki, Y. (2005) · Macromolecules · doi:10.1021/ma0504668 · Cited by 262
Grassie, N., Murray, E. J., & Holmes, P. A. (1984) · Polymer Degradation and Stability · doi:10.1016/0141-3910(84)90016-8 · Cited by 235
Miscibility, crystallization and morphology of poly(β-hydroxybutyrate)/poly(d,l-lactide) blends
Zhang, L., Xiong, C., & Deng, X. (1996) · Polymer · doi:10.1016/0032-3861(96)81093-7 · Cited by 234
Polylactide (PLA)—a new way of production
Jacobsen, S., Fritz, H. G., Degée, P., Dubois, P., & Jérôme, R. (1999) · Polymer Engineering & Science · doi:10.1002/pen.11518 · Cited by 226
The thermal degradation of poly(-(d)-β-hydroxybutyric acid): Part 3—The reaction mechanism
Grassie, N., Murray, E. J., & Holmes, P. A. (1984) · Polymer Degradation and Stability · doi:10.1016/0141-3910(84)90032-6 · Cited by 209
Ohkoshi, I., Abe, H., & Doi, Y. (2000) · Polymer · doi:10.1016/s0032-3861(99)00781-8 · Cited by 206
Extrusion Foaming of Semi‐Crystalline PLA and PLA/Thermoplastic Starch Blends
Mihai, M., Huneault, M. A., Favis, B. D., & Li, H. (2007) · Macromolecular Bioscience · doi:10.1002/mabi.200700080 · Cited by 188
Structural changes of polylactic-acid (PLA) microspheres under hydrolytic degradation
González, M. F., Ruseckaite, R. A., & Cuadrado, T. R. (1999) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19990222)71:8<1223::aid-app2>3.0.co;2-i · Cited by 109
Park, J. W., Doi, Y., & Iwata, T. (2004) · Biomacromolecules · doi:10.1021/bm049905l · Cited by 102
Zhang, J., Sato, H., Furukawa, T., Tsuji, H., Noda, I., & Ozaki, Y. (2006) · The Journal of Physical Chemistry B · doi:10.1021/jp065233c · Cited by 85
Effect of starch addition on compression‐molded poly(3‐hydroxybutyrate)/starch blends
Thiré, R. M. D. S. M., Ribeiro, T. A. A., & Andrade, C. T. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.23215 · Cited by 79
Vogel, C., Wessel, E., & Siesler, H. W. (2008) · Macromolecules · doi:10.1021/ma800139u · Cited by 53
Ferreira, B. M. P., Zavaglia, C. A. C., & Duek, E. A. D. R. (2001) · Materials Research · doi:10.1590/s1516-14392001000100008 · Cited by 48
Chen, C., Zhou, X., Zhuang, Y., & Dong, L. (2004) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.10742 · Cited by 43
Cited by
Poly(lactic acid)—Mass production, processing, industrial applications, and end of life
Castro-Aguirre, E., Iñiguez-Franco, F., Samsudin, H., Fang, X., & Auras, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.03.010 · Cited by 1,329
Naser, A. Z., Deiab, I., & Darras, B. M. (2021) · RSC Advances · doi:10.1039/d1ra02390j · Cited by 836
Poly (lactic acid) blends: Processing, properties and applications
Nofar, M., Sacligil, D., Carreau, P. J., Kamal, M. R., & Heuzey, M.-C. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.12.002 · Cited by 780
Compatibilization in bio-based and biodegradable polymer blends
Imre, B., & Pukánszky, B. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2013.01.019 · Cited by 613
Enzymes’ Power for Plastics Degradation
Tournier, V., Duquesne, S., Guillamot, F., Cramail, H., Taton, D., Marty, A., & André, I. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00644 · Cited by 590
Metadata
- Authors
- Zhang, M., & Thomas, N. L.
- Venue
- Advances in Polymer Technology
- Publisher
- Wiley
- Published
- 2011-04-11
- Volume
- 30
- Issue
- 2
- Pages
- 67-79
- ISSN
- 0730-6679 (ISSN-L)
- 1098-2329
- OpenAlex
- W2125566459
- Cited by
- 373
- References
- 22
- FWCI
- 5.80
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.