CoChat

Surface Curvature Differentially Regulates Stem Cell Migration and Differentiation via Altered Attachment Morphology and Nuclear Deformation

Open access

The DOI matches its Crossref record; 41 of the 42 references it cites were found in a registry or an index.

Abstract

Signals from the microenvironment around a cell are known to influence cell behavior. Material properties, such as biochemical composition and substrate stiffness, are today accepted as significant regulators of stem cell fate. The knowledge of how cell behavior is influenced by 3D geometric cues is, however, strongly limited despite its potential relevance for the understanding of tissue regenerative processes and the design of biomaterials. Here, the role of surface curvature on the migratory and differentiation behavior of human mesenchymal stem cells (hMSCs) has been investigated on 3D surfaces with well‐defined geometric features produced by stereolithography. Time lapse microscopy reveals a significant increase of cell migration speed on concave spherical compared to convex spherical structures and flat surfaces resulting from an upward‐lift of the cell body due to cytoskeletal forces. On convex surfaces, cytoskeletal forces lead to substantial nuclear deformation, increase lamin‐A levels and promote osteogenic differentiation. The findings of this study demonstrate a so far missing link between 3D surface curvature and hMSC behavior. This will not only help to better understand the role of extracellular matrix architecture in health and disease but also give new insights in how 3D geometries can be used as a cell‐instructive material parameter in the field of biomaterial‐guided tissue regeneration.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1002/advs.201600347

Cites

41 of 41 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Setup used to investigate curvature‐dependent cell behavior. A) Scanning electron microscopy image of the cell culture chip showing flat, convex, and concave spherical surfaces. B) Experimental microscope setup for time lapse and immunohistochemistry imaging. The chip was placed on the glass window of a custom‐made culture dish with the structures facing downward. C) 3D image stacks were recorded using an inverted confocal/multiphoton microscope.
Figure 1 Setup used to investigate curvature‐dependent cell behavior. A) Scanning electron microscopy image of the cell culture chip showing flat, convex, and concave spherical surfaces. B) Experimental microscope setup for time lapse and immunohistochemistry imaging. The chip was placed on the glass window of a custom‐made culture dish with the structures facing downward. C) 3D image stacks were recorded using an inverted confocal/multiphoton microscope.CC BY · PubMed Central
Figure 2 hMSC migration speed is increased on concave compared to flat and convex surfaces. A) Quantification of hMSC migration speed on flat, concave and convex surfaces over 24 h shown as mean ± 95% confidence interval. ***P < 0.001. B) Projections of subsequent z‐stack images of a time lapse recording of migrating cells on a convex spherical structure (top) and in a concave spherical structure (bottom) with κ = 1/175 µm−1 in top view and side view. The yellow arrow highlights a cell showing a typical migration mode on convex or concave structures, respectively. Note the flat cell morphology on convex structures and the slow but constant displacement, while in concave structures cells form long and thin extensions over the concave pit followed by a large displacement of the cell body. Scale bar 100 µm. C) Schematic representation of the observed migration regimes of cells in convex (top) and concave (bottom) spherical structures. Cells on convex structures showed a typical 2D MSC migration behavior, while cells on concave surfaces adapted a spider‐like conformation which is characterized by long cell extensions spanning over a large free space followed by fast cell body displacement.
Figure 2 hMSC migration speed is increased on concave compared to flat and convex surfaces. A) Quantification of hMSC migration speed on flat, concave and convex surfaces over 24 h shown as mean ± 95% confidence interval. ***P < 0.001. B) Projections of subsequent z‐stack images of a time lapse recording of migrating cells on a convex spherical structure (top) and in a concave spherical structure (bottom) with κ = 1/175 µm−1 in top view and side view. The yellow arrow highlights a cell showing a typical migration mode on convex or concave structures, respectively. Note the flat cell morphology on convex structures and the slow but constant displacement, while in concave structures cells form long and thin extensions over the concave pit followed by a large displacement of the cell body. Scale bar 100 µm. C) Schematic representation of the observed migration regimes of cells in convex (top) and concave (bottom) spherical structures. Cells on convex structures showed a typical 2D MSC migration behavior, while cells on concave surfaces adapted a spider‐like conformation which is characterized by long cell extensions spanning over a large free space followed by fast cell body displacement.CC BY · PubMed Central
Figure 3 Curvature driven alterations in cell attachment. A) Representative immunohistochemical images of vinculin (green) identifying focal adhesions, F‐actin (red) and nuclei (blue) for hMSCs on concave and convex spherical surfaces (κ = 1/175 µm−1), and a flat surface after 2 d in expansion medium. Scale bar 50 µm. B) Number of total amount of focal adhesions (FAs) per cell, divided into different focal adhesion size classes. C) Number of focal adhesions per cell near the nucleus for the same focal adhesion size classes as in (B). No significant differences were found in the total amount and size of focal adhesions per cell on the different structures. However, near the nucleus a significant lower number of focal adhesions (size > 0.1 µm2) was found in cells in concave surfaces. Mean ± 95% confidence interval. *P < 0.05, **P < 0.01. D) 3D reconstruction of immunohistological stained cells (F‐actin in red, FAs in green, and nuclei in blue) on a concave and convex surface. Cells on concave surfaces showed an upward stretched cell morphology where a substantial part of the cell body is not attached to the surface. Cells on convex surfaces were fully attached to the surface.
Figure 3 Curvature driven alterations in cell attachment. A) Representative immunohistochemical images of vinculin (green) identifying focal adhesions, F‐actin (red) and nuclei (blue) for hMSCs on concave and convex spherical surfaces (κ = 1/175 µm−1), and a flat surface after 2 d in expansion medium. Scale bar 50 µm. B) Number of total amount of focal adhesions (FAs) per cell, divided into different focal adhesion size classes. C) Number of focal adhesions per cell near the nucleus for the same focal adhesion size classes as in (B). No significant differences were found in the total amount and size of focal adhesions per cell on the different structures. However, near the nucleus a significant lower number of focal adhesions (size > 0.1 µm2) was found in cells in concave surfaces. Mean ± 95% confidence interval. *P < 0.05, **P < 0.01. D) 3D reconstruction of immunohistological stained cells (F‐actin in red, FAs in green, and nuclei in blue) on a concave and convex surface. Cells on concave surfaces showed an upward stretched cell morphology where a substantial part of the cell body is not attached to the surface. Cells on convex surfaces were fully attached to the surface.CC BY · PubMed Central
Figure 4 Surface curvature affects the F‐actin cytoskeleton and osteocalcin levels in hMSCs. Representative immunohistochemical images of osteocalcin in hMSCs on A) a concave and B) a convex spherical surface (κ = 1/175 µm−1) after 10 d in osteogenic medium (osteocalcin in green, nuclei in blue, and F‐actin in red). Scale bar 100 µm. Dashed lines highlight the contour of the spherical surface. C–D) Quantification of osteocalcin intensity/cell for different curvatures κ (mm−1) shown as mean values of all concave/convex surfaces (bar charts) and for the individual curvatures investigated (point charts). After 10 d in C) expansion medium and D) osteogenic medium, significant higher levels on convex spherical surfaces compared to flat and concave surfaces were revealed. E,F) Quantified F‐actin intensity/cell levels were highest on concave spherical surfaces after 10 d in E) expansion medium and F) osteogenic medium. Mean ± standard deviation. *P < 0.05, **P < 0.01, ***P < 0.001.
Figure 4 Surface curvature affects the F‐actin cytoskeleton and osteocalcin levels in hMSCs. Representative immunohistochemical images of osteocalcin in hMSCs on A) a concave and B) a convex spherical surface (κ = 1/175 µm−1) after 10 d in osteogenic medium (osteocalcin in green, nuclei in blue, and F‐actin in red). Scale bar 100 µm. Dashed lines highlight the contour of the spherical surface. C–D) Quantification of osteocalcin intensity/cell for different curvatures κ (mm−1) shown as mean values of all concave/convex surfaces (bar charts) and for the individual curvatures investigated (point charts). After 10 d in C) expansion medium and D) osteogenic medium, significant higher levels on convex spherical surfaces compared to flat and concave surfaces were revealed. E,F) Quantified F‐actin intensity/cell levels were highest on concave spherical surfaces after 10 d in E) expansion medium and F) osteogenic medium. Mean ± standard deviation. *P < 0.05, **P < 0.01, ***P < 0.001.CC BY · PubMed Central
Figure 5 Curvature induced cytoskeletal tension affects nucleus morphology and lamin‐A levels. A–C) Representative immunohistochemical images of lamin‐A (green), F‐actin (red), and nuclei (blue) in hMSCs on concave and convex spherical surfaces (κ = 1/175 µm−1) and a flat surface after 10 d culture in expansion medium. A‐B) F‐actin bundles cross over and indent into the nucleus on convex spherical surfaces creating grooves in the nuclear membrane. Cell nuclei were flattened but without grooves on flat surfaces and the nuclei of cells on concave surfaces presented a round morphology. C‐D) Cells on convex structures showed highest lamin‐A levels in immunohistological staining verified by quantification of lamin‐A signal intensity shown as mean ± 95% confidence interval. **P < 0.01, ***P < 0.001. Scale bar in (C) equals to 50 µm. E) Schematic representation of the cytoskeletal forces acting on the nucleus (F‐actin in red, lamin‐A in green). Cytoskeletal tension creates a push force on convex spherical surfaces leading to compression and deformation of the nucleus. A cytoskeletal pull force on concave surfaces (see also Figure 6) leads to a relatively low exposure of the nucleus to cytoskeletal forces resulting in a rounded nucleus shape and low lamin‐A levels.
Figure 5 Curvature induced cytoskeletal tension affects nucleus morphology and lamin‐A levels. A–C) Representative immunohistochemical images of lamin‐A (green), F‐actin (red), and nuclei (blue) in hMSCs on concave and convex spherical surfaces (κ = 1/175 µm−1) and a flat surface after 10 d culture in expansion medium. A‐B) F‐actin bundles cross over and indent into the nucleus on convex spherical surfaces creating grooves in the nuclear membrane. Cell nuclei were flattened but without grooves on flat surfaces and the nuclei of cells on concave surfaces presented a round morphology. C‐D) Cells on convex structures showed highest lamin‐A levels in immunohistological staining verified by quantification of lamin‐A signal intensity shown as mean ± 95% confidence interval. **P < 0.01, ***P < 0.001. Scale bar in (C) equals to 50 µm. E) Schematic representation of the cytoskeletal forces acting on the nucleus (F‐actin in red, lamin‐A in green). Cytoskeletal tension creates a push force on convex spherical surfaces leading to compression and deformation of the nucleus. A cytoskeletal pull force on concave surfaces (see also Figure 6) leads to a relatively low exposure of the nucleus to cytoskeletal forces resulting in a rounded nucleus shape and low lamin‐A levels.CC BY · PubMed Central
Figure 6 Schematic representation of the proposed geometry‐induced changes in cellular attachment and forces on the nucleus for flat, concave and convex surfaces. Nuclei are depicted in blue, F‐actin in red and focal adhesions in green. In cells on concave surfaces, cytoskeletal forces result in an upward pull force away from the substrate. The cell body is lifted away from the surface and remains attached only at distinct adhesion points while the nucleus is not exposed to severe cytoskeletal forces. In cells attached to convex spherical surfaces, cytoskeletal forces create a large push force toward the surface leading to compression and deformation of the nucleus. The mechanical forces on the nucleus induce high lamin‐A levels and promote osteogenic differentiation. As a consequence of the limited vertical extension of the cell, only a small push force is acting on the nucleus on flat surfaces.
Figure 6 Schematic representation of the proposed geometry‐induced changes in cellular attachment and forces on the nucleus for flat, concave and convex surfaces. Nuclei are depicted in blue, F‐actin in red and focal adhesions in green. In cells on concave surfaces, cytoskeletal forces result in an upward pull force away from the substrate. The cell body is lifted away from the surface and remains attached only at distinct adhesion points while the nucleus is not exposed to severe cytoskeletal forces. In cells attached to convex spherical surfaces, cytoskeletal forces create a large push force toward the surface leading to compression and deformation of the nucleus. The mechanical forces on the nucleus induce high lamin‐A levels and promote osteogenic differentiation. As a consequence of the limited vertical extension of the cell, only a small push force is acting on the nucleus on flat surfaces.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 41 references

Cited by

Items 201–300 of 344

Metadata

Authors
Werner, M., Blanquer, S. B. G., Haimi, S. P., Korus, G., Dunlop, J. W. C., Duda, G. N., Grijpma, D. W., & Petersen, A.
Affiliations
  • Berlin Institute of Health at Charité - Universitätsmedizin Berlin (DE)
  • University of Twente (NL)
  • University of Helsinki (FI)
  • Max Planck Institute of Colloids and Interfaces (DE)
  • Berlin-Brandenburger Centrum für Regenerative Therapien (DE)
  • University Medical Center Groningen (NL)
Corresponding author
Petersen, Ansgar
Venue
Advanced Science
Publisher
Wiley
Published
2016-12-20
Volume
4
Issue
2
Pages
1600347-1600347
ISSN
2198-3844 (ISSN-L)
OpenAlex
W2562843154
Cited by
345
References
42
Citations by year
2026: 37 · 2025: 38 · 2024: 40 · 2023: 53 · 2022: 33 · 2021: 33 · 2020: 46 · 2019: 29 · 2018: 28 · 2017: 7 · 2016: 1
FWCI
14.92
Type
journal article
Language
en
Open access
Locations
  • Advanced Science (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • TU/e Research Portal (submittedVersion, other-oa)
  • University of Twente Research Information (submittedVersion, cc-by)
  • TU/e Research Portal (submittedVersion)
  • HAL (submittedVersion, other-oa)
  • Työväentutkimus Vuosikirja (submittedVersion)
  • MPG.PuRe (Max Planck Society) (submittedVersion, other-oa)
  • University of Groningen research database (University of Groningen / Centre for Information Technology) (submittedVersion, cc-by)
Funders
Berlin-Brandenburg Center for Regenerative Therapies
Topics
  • Life Sciences › Biochemistry, Genetics and Molecular Biology › Cell Biology › Cellular Mechanics and Interactions
  • Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
  • Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
Keywords
surface curvature, mesenchymal stem cells, cell migration, osteogenic differentiation, nuclear deformation, lamin A, cytoskeletal forces, stereolithography, biomaterials, tissue regeneration, extracellular matrix architecture

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.