Carbon-Based Composite Phase Change Materials for Thermal Energy Storage, Transfer, and Conversion
Open accessThe DOI matches its Crossref record; 214 of the 217 references it cites were found in a registry or an index; 15 of the 186 sources its claims cite were checked for support.
Abstract
Phase change materials (PCMs) can alleviate concerns over energy to some extent by reversibly storing a tremendous amount of renewable and sustainable thermal energy. However, the low thermal conductivity, low electrical conductivity, and weak photoabsorption of pure PCMs hinder their wider applicability and development. To overcome these deficiencies and improve the utilization efficiency of thermal energy, versatile carbon materials have been increasingly considered as supporting materials to construct shape-stabilized composite PCMs. Despite some carbon-based composite PCMs reviews regarding thermal conductivity enhancement, a comprehensive review of carbon-based composite PCMs does not exist. Herein, a systematic overview of recent carbon-based composite PCMs for thermal storage, transfer, conversion (solar-to-thermal, electro-to-thermal and magnetic-to-thermal), and advanced multifunctional applications, including novel metal organic framework (MOF)-derived carbon materials are provided. The current challenges and future opportunities are also highlighted. The authors hope this review can provide in-depth insights and serve as a useful guide for the targeted design of high-performance carbon-based composite PCMs.
Overview
CoChat Summary
TL;DR
This is a review of carbon-based composite phase change materials (PCMs) for thermal energy storage, heat transfer, and thermal energy conversion, with emphasis on how carbon structure and interface design affect performance. The paper argues that 3D interconnected carbon materials and tailored interfacial interactions are key to improving latent heat retention, thermal conductivity, and multifunctionality.
Key findings
- Pure PCMs have major practical limits: organic PCMs typically have low thermal conductivity of 0.15–0.30 W mK−1, while inorganic PCMs suffer from phase separation and supercooling; carbon additives are presented as a way to address these issues.
- The review reports that 3D carbon networks generally outperform 2D and 1D carbon materials for thermal transfer, with the stated tendency 3D > 2D > 1D, because they create continuous heat-transfer pathways and reduce interfacial resistance.
- Specific examples show large performance gains, e.g.:
- EG-loaded SA reached 2.50 W mK−1, about 9.6× pure SA, with heat release time 74.8% less than pure SA.
- EG-loaded paraffin reached 8.86 W mK−1, about 24× pure paraffin.
- Graphene foam/paraffin reached 0.62 W mK−1 and 200 J g−1 latent heat.
- For energy conversion, the paper reports several high efficiencies, including solar-to-thermal 92.3% for Fe3O4-GNS/PEG, electric-to-thermal 94.5% for a CNTs-penetrated porous network carbon system, and magnetic-to-thermal 41.7% for Fe3O4-GNS/PEG.
Methods
- Narrative review / systematic overview of recent literature on carbon-based composite PCMs, covering CNTs, CFs, graphene/GO/rGO, MOF-derived carbon, biomass-derived carbon, expanded graphite, and other porous carbons.
- The review organizes the field by PCM classification, confinement strategy, thermal transfer mechanisms, and application type: thermal storage, thermal transfer, and solar-/electric-/magnetic-to-thermal conversion.
- The main analysis is qualitative and mechanism-focused, including lattice vibration, phonon transmission, and phonon scattering, plus comparative discussion of reported studies and their numerical performance results.
Limitations
- The paper itself states that many areas still need further research: mechanistic studies are still insufficient, electric-to-thermal and magnetic-to-thermal efficiencies remain low, and more optimized calculation methods are needed because current efficiency calculations do not account for heat loss in the test setup.
- The text also notes that much of the field still lacks work on functional-group-modified pores, pore shapes, hierarchical pore distributions, and array-oriented synthesis strategies.
- Evident from the text: this is a review article, so it does not report a new experimental sample or primary dataset of its own.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures

![Figure 2 The working principle of solid–liquid PCMs. Reproduced with permission.[ 52 ] Copyright 2020, Elsevier.](https://figures.cochat.ai/paper-figures/05766de055724948923d1aa48967af45/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-2.jpg)
![Figure 3 Classification of PCMs based on chemical compositions. Reproduced with permission.[ 40 ] Copyright 2020, Elsevier.](https://figures.cochat.ai/paper-figures/8f646c37560c497dabd6d04a9b1caaae/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-3.jpg)
![Figure 4 Different dimensional confinement strategies of PCMs. Reproduced with permission.[ 46 ] Copyright 2018, Royal Society of Chemistry.](https://figures.cochat.ai/paper-figures/0ee72a946eeb48df9a137dc6fd713b16/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-4.jpg)
![Figure 5 a) Heat transfer scheme in crystal heat conduction. b) Spring vibration heat transfer system. c) Temperature curve with length and phonon energy diagram. d) Phonon scattering modes. e) Phonon–phonon collision modes: N and U processes. f) Phonon mean free pathways for three different phonon scattering modes. Reproduced with permission.[ 40 ] Copyright 2020, Elsevier.](https://figures.cochat.ai/paper-figures/7e3a5b51a7f94d6faa19e39cfe9296a7/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-5.jpg)


![Figure 8 a) Preparation diagram of PU@CNTs. b) Schematic illustration of thermal conduction in PU@CNTs along the axial and radial directions. c) SEM images of PU@CNTs‐10 from top surface, cross‐section, bottom surface, center, and edge. Reproduced with permission.[ 71 ] Copyright 2019, Elsevier. d) Simulated heat flux field distributions in paraffin‐based composite PCMs and schematic diagram for thermal conduction inside the pores in CF‐CNTs. Reproduced with permission.[ 26 ] Copyright 2019, Elsevier.](https://figures.cochat.ai/paper-figures/f3de8e604960475eafc9f62fb40c8afc/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-8.jpg)
![Figure 9 a) Schematic process for the solar‐to‐thermal conversion. b) SEM images of PET/PTA‐x CNTs coaxial fibers. Reproduced with permission.[ 72 ] Copyright 2019, American Chemical Society. c) Conceptual illustration of the cyclic, dramatic, and reversible electrical conductivity changes. Reproduced with permission.[ 73 ] Copyright 2015, American Chemical Society. d) The ball milling and chemical treatment processes. Reproduced with permission.[ 74 ] Copyright 2018, Elsevier. e) Infrared images of SA/CNTs sponge under the solar irradiation. Reproduced with permission.[ 75 ] Copyright 2018, Elsevier.](https://figures.cochat.ai/paper-figures/54527524c2b2451d858cd5f991facbd7/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-9.jpg)
![Figure 10 a) Formation mechanism of PEG/GNP. Reproduced with permission.[ 32 ] Copyright 2018, American Chemical Society. b,c) The role and formation process of C22@GO‐CNTs microcapsules. Reproduced with permission.[ 76 ] Copyright 2016, American Chemical Society. d) Scheme of electric‐ and solar‐driven CNTs‐based composite PCMs. e) Illustration of the paraffin molecules to CNTs in contact. Reproduced with permission.[ 77 ] Copyright 2012, American Chemical Society. f) Compressible aligned CNTs arrays and composite PCMs. Reproduced with permission.[ 78 ] Copyright 2013, American Chemical Society.](https://figures.cochat.ai/paper-figures/d2e186412f5b45638b7921ec6f2053c7/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-10.jpg)
![Figure 11 a) Preparation scheme of HDA‐g‐SWCNTs and HDA‐g‐MWCNTs. b) FLIR camera images of HDA‐g‐MWCNTs, and HDA‐g‐SWCNTs. c) Digital photos of the electrical conductivity experimental design and FLIR camera images of HDA‐g‐SWCNT film under 30 V. Reproduced with permission.[ 79 ] Copyright 2019, Elsevier.](https://figures.cochat.ai/paper-figures/11ae20a0801d4f1da39b0f627f795507/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-11.jpg)
![Figure 12 a) Preparation scheme of CNTs sponge. b,c) SEM and TEM images of CNTs sponge. d) Schematic illustration of the thermotherapy. e) Actual thermotherapy effect evaluation (left is a thermotherapy mask, right is a traditional mask). Reproduced with permission.[ 80 ] Copyright 2020, Elsevier.](https://figures.cochat.ai/paper-figures/865cef62ac5b4e62af9be51ea9af5261/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-12.jpg)
![Figure 13 a) Preparation scheme of carbon bonded CFs monolith. Reproduced with permission.[ 84 ] Copyright 2018, Elsevier. b) SEM images of the original cotton fiber and carbon.[ 15 ] Copyright 2019, Royal Society of Chemistry. c) EDS of composite PCMs. Reproduced with permission.[ 85 ] Copyright 2016, Elsevier. d) Simplified relationship model between PCMs and CFs. e) Effective thermal conductivities of composite PCMs prepared by hot‐press method and melt‐mixing method. Reproduced with permission.[ 86 ] Copyright 2015, Elsevier.](https://figures.cochat.ai/paper-figures/381b05b31ece4e51ac21d8cd2893a51d/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-13.jpg)
![Figure 14 a) The contact types between EG and CFs. Reproduced with permission.[ 87 ] Copyright 2016, Elsevier. b) Optical images of the laminates. Reproduced with permission.[ 88 ] Copyright 2018, Elsevier. c) Phase transition process observation at different time. Reproduced with permission.[ 89 ] Copyright 2016, Elsevier. d) Infrared images of composite PCMs with time. Reproduced with permission.[ 90 ] Copyright 2018, Elsevier.](https://figures.cochat.ai/paper-figures/f8414b055b0645e6acbe85d4107698a9/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-14.jpg)
![Figure 15 a) Preparation scheme of microencapsulated PCMs. Reproduced with permission.[ 107 ] Copyright 2018, Springer Nature. b) Thermal infrared images of pure PEG and composite PCMs during the heating and cooling processes. Reproduced with permission.[ 99 ] Copyright 2029, Elsevier. c) Preparation scheme of the graphene foam and graphene/paraffin composite PCMs. d) SEM image of graphene foam. e) SEM image of graphene/paraffin composite PCMs. Reproduced with permission.[ 109 ] Copyright 2016, Royal Society of Chemistry.](https://figures.cochat.ai/paper-figures/2d830fe7ed474e2d867246323506ff80/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-15.jpg)
![Figure 16 a) Preparation scheme of AGAs. b) Longitudinal view SEM images. c) Transversal view SEM images. d) Raman mappings of AGAs. Reproduced with permission.[ 112 ] Copyright 2018, Wiley‐VCH.](https://figures.cochat.ai/paper-figures/1bfc712ac3f74143b287624358fa415a/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-16.jpg)
![Figure 17 a) Preparation scheme of MCC/PEG/GNP composite PCMs. b) SEM images of MCC/GNP‐1.51 aerogel and MCC/PEG/GNP‐1.51 composite PCMs. Reproduced with permission.[ 100 ] Copyright 2019, Elsevier. c) Preparation scheme of the hybrid porous scaffolds and composite PCMs. Reproduced with permission.[ 113 ] Copyright 2018, American Chemical Society.](https://figures.cochat.ai/paper-figures/5ca585a23ea24c05ac27fb98a6d369fa/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-17.jpg)
![Figure 18 a) Schematic diagram of the structure and mechanism of different thermal conductivity effects. b) The formation process of 3D porous scaffolds. c) Solar‐to‐thermal energy conversion curves of PEG and composite PCMs. Reproduced with permission.[ 115 ] Copyright 2016, Royal Society of Chemistry. d) Preparation scheme of Ag‐GNS and Ag‐GNS/PEG composite PCMs. e) Schematic illustration of the solar‐to‐thermal energy conversion. Reproduced with permission.[ 106 ] Copyright 2019, Elsevier.](https://figures.cochat.ai/paper-figures/b35d76ae81e34047b200f331da2e9e0e/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-18.jpg)
![Figure 19 a) Thermal infrared images of HDA‐g‐GN under an infrared lamp and DC power supply. Reproduced with permission.[ 116 ] Copyright 2019, American Chemical Society. b) Preparation scheme of the MF‐templated hybrid aerogels. Reproduced with permission.[ 98 ] c) Scheme of the magnetic‐ and solar‐to‐thermal energy conversion and storage. d) Formation mechanism of Fe3O4‐GNS. e) Magnetic‐to‐thermal energy conversion curves (1.36 MHz and 550 A m−1). Reproduced with permission.[ 34 ] Copyright 2017, Royal Society of Chemistry.](https://figures.cochat.ai/paper-figures/6e089a559ce7479782d5b913876fe3ad/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-19.jpg)
![Figure 20 a) Preparation scheme of the graphene/PCMs smart fibers. b–e) Photograph and IR images of the aerogel‐directed smart fibers under an input voltage of 30 V. f,g) Photograph and IR images of the aerogel‐directed smart fibers under solar irradiation of 1.0 sun. Reproduced with permission.[ 120 ] Copyright 2018, Wiley‐VCH.](https://figures.cochat.ai/paper-figures/681cff145dcd4a509ed0ef59acd96cea/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-20.jpg)
![Figure 21 a) Preparation diagram of PEG/HPC composite PCMs. b) Formation mechanism of highly hierarchical porous carbon. c) XRD patterns of PEG/HPC‐1000 composite PCMs at various temperatures. d) DSC curves. e) Thermal conductivities and latent heats of pure PEG and PEG/HPC‐1000 composite PCMs. Reproduced with permission.[ 130 ] Copyright 2016, Royal Society of Chemistry.](https://figures.cochat.ai/paper-figures/92055b5634bf415ca14d793f5151c68c/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-21.jpg)
![Figure 22 a) Preparation diagram of PEG/NPC‐Al composite PCMs, b) TEM images of NPC‐Al. c) Schematic diagram of hydrogen bond interactions between doped nitrogen and PCMs molecules. d) Actual and calculated latent heat values. e) Supercooling characteristics. f) TES capabilities. g) Impregnation characteristics of composite PCMs. Reproduced with permission.[ 131 ] Copyright 2019, Elsevier.](https://figures.cochat.ai/paper-figures/0264414a959c45e8b067064386204ed9/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-22.jpg)
![Figure 23 a) Preparation diagram of SA/rGO/MOF‐5‐C composite PCMs. Reproduced with permission.[ 27 ] Copyright 2018, American Chemical Society. b) Preparation diagram of SA/CNTs/PC composite PCMs. TEM and SEM images: c) CNTs, d) CNTs/ZIF‐8, e) CNTs/PC. Reproduced with permission.[ 135 ] Copyright 2018, Elsevier.](https://figures.cochat.ai/paper-figures/c3f83107d3db486cb6b871d6fc6f9b5c/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-23.jpg)
![Figure 24 a) Preparation diagram of electric‐to‐thermal composite PCMs. b–d) TEM images of ZIF‐67/IRMOF‐3. Reproduced with permission.[ 138 ] Copyright 2020, Wiley‐VCH.](https://figures.cochat.ai/paper-figures/165d3d0623b5420e857163aa471e0cbb/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-24.jpg)
![Figure 25 a) Preparation diagram of wood‐derived carbon‐based composite PCMs. b) SEM images. Reproduced with permission.[ 157 ] Copyright 2018, Royal Society of Chemistry. c) Preparation diagram of adromischus cooperi‐derived carbon‐based composite PCMs. d) SEM images of spongy cell and palisade cell. Reproduced with permission.[ 159 ] Copyright 2019, Elsevier. e) Preparation diagram of cotton‐derived porous carbon. Reproduced with permission.[ 137 ] Copyright 2018, Royal Society of Chemistry.](https://figures.cochat.ai/paper-figures/ff933e46a5f64cd3bf4a8bc15ee05c6c/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-25.jpg)
![Figure 26 a) Preparation diagram of potato‐derived porous carbon. Reproduced with permission.[ 160 ] Copyright 2019, Elsevier. b) Photo of corn cob. c,d) SEM images of carbonized corn cob. Reproduced with permission.[ 166 ] Copyright 2014, Elsevier. e) Preparation diagram of FDC‐K. f) Thermal infrared images of SA and SA/FDC‐K. Reproduced with permission.[ 168 ] Copyright 2016, Wiley‐VCH.](https://figures.cochat.ai/paper-figures/49c9877995ce4d79b03177e15a3fa3a9/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-26.jpg)
![Figure 27 a) Preparation diagram of biological porous carbon. b) Preparation diagram of composite PCMs. Reproduced with permission.[ 161 ] Copyright 2018, Elsevier. c) SEM images of the original cotton fibers and carbon sponges. Reproduced with permission.[ 171 ] Copyright 2019, Elsevier. d) Preparation diagram of winter melon derived CAs and CAs/paraffin composite PCMs. e) Solar‐to‐thermal conversion curves of CAs/paraffin composite PCMs. Reproduced with permission.[ 158 ] Copyright 2014, Royal Society of Chemistry.](https://figures.cochat.ai/paper-figures/3ef39c4ae87b4aa5b316c5ace18c8453/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-27.jpg)
![Figure 28 Preparation diagram of the microencapsulated PCMs. Reproduced with permission.[ 173 ] Copyright 2017, Elsevier.](https://figures.cochat.ai/paper-figures/b40a50f8c795409391fe8d203816aaab/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-28.jpg)
![Figure 29 a) Preparation diagram of the microencapsulated PCMs. b) EDS mappings of the microencapsulated PCMs with different mass fractions of carbon. c) Thermal infrared images. Reproduced with permission.[ 174 ] Copyright 2018, Elsevier.](https://figures.cochat.ai/paper-figures/7937eddfb324416682f74312b7673ddd/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-29.jpg)
![Figure 30 a) Preparation diagram of composite PCMs. b) Schematic diagram of the deformation. c) Temperature‐time curves of composite PCMs. d) Schematic diagram of the bending deformation of composite PCMs. Reproduced with permission.[ 184 ] Copyright 2019, Elsevier.](https://figures.cochat.ai/paper-figures/657220b2d37f470c999900561ae6d656/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-30.jpg)
![Figure 31 a) Preparation diagram of the phase change macrocapsules. b) Different shapes of macrocapsules. c) Temperature‐time curves of phase change macrocapsules‐based heat sink with different shapes of flat, concave, convex, and folded structures. Reproduced with permission.[ 187 ] Copyright 2019, Elsevier.](https://figures.cochat.ai/paper-figures/bcde50f4bdbb4b8eb87d9513b4438b9c/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-31.jpg)
![Figure 32 a) Preparation diagram of N‐doped hierarchical porous carbon‐based composite PCMs. b,c) DSC curves of different composite PCMs. d) Crystallinities of different composite PCMs. Reproduced with permission.[ 134 ] Copyright 2019, Elsevier.](https://figures.cochat.ai/paper-figures/4a238b7a65bd4cf8a32bf22489652a55/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-32.jpg)
![Figure 33 a–c) Thermal infrared images of various composite PCMs. d) Temperature–time curves of pure PEG and composite PCMs. e,f) Thermal conductivities of pure PEG and composite PCMs. g) DSC curves of pure PEG and composite PCMs. h) Latent heat values of various composite PCMs. i) TEM image of CQDs‐derived porous carbon. Reproduced with permission.[ 24 ] Copyright 2018, Elsevier.](https://figures.cochat.ai/paper-figures/0eb97e957b5f48ddbdbcb976194619e8/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-33.jpg)
![Figure 34 a) Preparation diagram of composite PCMs and large‐size aligned graphite sheets. b) SEM image of 3D aligned and interconnected graphite nanoplatelets framework. c) Schematic diagram of the parallel model for the thermal conduction. d) Thermal effusivity comparison with the latest reports. Reproduced with permission.[ 207 ] Copyright 2019, Wiley‐VCH.](https://figures.cochat.ai/paper-figures/d23cff5e5ce246ff89e1114556386b92/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-34.jpg)
![Figure 35 a) Schematic diagram of composite PCMs for thermal comfort application. b) IR images of pure paraffin and CCF‐paraffin composite PCMs. c) IR images of pure paraffin, paraffin‐Al, and CCF‐paraffin composite PCMs. d) Photograph of a bent CCF‐paraffin composite heat pack. e,f) IR images of CCF‐paraffin composite heat pack on the human arm. Reproduced with permission.[ 209 ] Copyright 2018, American Chemical Society.](https://figures.cochat.ai/paper-figures/2ea5fe5bbfcd44699ead604df919c08a/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-35.jpg)
![Figure 36 a) Preparation diagram of PL‐functionalized composite PCMs. b) Fluorescent images of CQDs. c) HRTEM image of CQDs. d,e) DSC curves of MOF‐based composite PCMs. f–h) PL spectra of MOF‐based composite PCMs. Reproduced with permission.[ 128 ] Copyright 2019, Elsevier.](https://figures.cochat.ai/paper-figures/51e7ce6bac844bea8fff30937167951d/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-36.jpg)
Verification
Claims the paper makes
11 Valid · 3 Not valid · 108 Not checked · 33 Own results and interpretations
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“In contrast to inorganic PCMs, organic PCMs have been extensively studied in the preparation of high‐performance multifunctional composite PCMs.[ 6 , 7 , 8 ]”
§ Carbon‐Based Composite Phase Change Materials for Thermal Energy Storage, Transfer, and Conversion > Introduction Energy conservation has become an important issue for human activity. Among natural energy sources, thermal energy is conventionally considered a low‐grade type of energy and is generally treated as waste in industrial production. Although solar radiation continuously provides abundant thermal energy during the daytime, a large quantity is often wasted. If abundant thermal energy can be stored and released during supply and demand cycles, the consumption of fossil fuels can be reduced, which will greatly alleviate current energy and environmental issues. Thermal energy storage (TES) techniques are classified into thermochemical energy storage, sensible heat storage, and latent heat storage (LHS).[ 1 , 2 , 3 ] Comparatively, LHS using phase change materials (PCMs) is considered a better option because it can reversibly store and release large quantities of thermal energy from the surrounding environment with small temperature variation during the phase change process.[ 4 , 5 ] In contrast to inorganic PCMs, organic PCMs have been extensively studied in the preparation of high‐performance multifunctional composite PCMs.[ 6 , 7 , 8 ] However, although organic PCMs demonstrate great potential for enhancing energy utilization efficiency, their practical applications are hindered by liquid leakage, low thermal conductivity for phonon transmission, weak photoabsorption capacity for solar‐to‐thermal conversion and low electrical conductivity for electric‐to‐thermal conversion.[ 8 , 9 , 10 , 11 ] Liquid leakage from melted PCMs is potentially dangerous. To date, the most popular leak‐proof strategies are the construction of shape‐stabilized composite PCMs and core–shell composite PCMs.[ 12 , 13 , 14 , 15 , 16 , 17 , 18 , 19 , 20 ] Low thermal conductivity decelerates the thermal charging/discharging rates of PCMs. Originally, additives with high thermal conductivity were directly introduced into a system to obtain thermally conductive composite PCMs; however, the enhancement of thermal conductivity was generally limited. Moreover, this strategy inevitably reduces the TES density due to the occupation of the inherent pores.[ 4 , 15 , 21 , 22 , 23 , 24 , 25 , 26 , 27 ] To balance these two contradictions, 3D interconnected carbon materials have been considered as supports to encapsulate PCMs, which are competitive candidates for the preparation of composite PCMs with high thermal conductivity.[ 24 , 27 , 28 , 29 ] Additionally, to address the weak photoabsorption and low electrical conductivity of pristine PCMs, introducing carbonaceous materials into a system is one prospective method due to their excellent photoabsorption and high electrical conductivity. Relevant reports have also shown that introducing small amounts of carbon materials into pristine PCMs can effectively improve the photoabsorption and electrical conductivity of PCMs by constructing a carbon percolation network. Therefore, carbon‐based composite PCMs have become increasingly attractive in solar‐to‐thermal, electric‐to‐thermal, and even magnetic‐to‐thermal conversions.[ 8 , 11 , 29 , 30 , 31 , 32 , 33 , 34 ] Very recently, numerous high‐performance carbon‐based composite PCMs have been reported. Although there are some published reviews on composite PCMs,[ 4 , 35 , 36 , 37 , 38 , 39 , 40 , 41 , 42 , 43 , 44 ] they have mainly focused on thermal storage and thermal transfer enhancement, and the corresponding thermal enhancement mechanisms have mainly focused on structural level analysis and have lacked microscale phonon mechanism analysis.[ 4 , 26 , 43 ] An informative review providing constructive microscale phonon insights into advanced carbon‐based composite PCMs for thermal storage, thermal transfer, energy conversion, and advanced utilization does not exist. Herein, we summarize the recent advances in high‐performance carbon‐based composite PCMs for thermal storage, thermal transfer, energy conversion, and advanced utilization, which mainly include carbon nanotubes (CNTs), carbon fibers (CFs), graphene/GO/rGO, metal organic frameworks (MOFs)‐derived carbon, biomass‐derived carbon, expanded graphite (EG), and other carbon materials (Figure 1 ). In particular, we analyze the thermal transfer micromechanisms from the perspective of lattice vibration and phonon transmission. Finally, the perspectives and challenges in the development of high‐performance carbon‐based composite PCMs are highlighted.
What the sources say
- Not checked — no full text of the sourcecites [6] matched to “Smart Utilization of Multifunctional Metal Oxides in Phase Change Materials” (2020) source
- Not checked — no full text of the sourcecites [7] matched to “Advanced multifunctional composite phase change materials based on photo-responsive materials” (2021) source
- Partly supportedcites [8] matched to “Phase Change Materials for Electro-Thermal Conversion and Storage: From Fundamental Understanding to Engineering Design” (2020) sourceExperimental — accuracy not yet measured
The Introduction (page unavailable) calls high-performance electro-thermal composite PCMs a research focus, and the CNTs-based composite PCMs section (page unavailable) discusses single-organic-PCM composites. These passages support substantial study of organic-PCM composites, but they do not establish that organic PCMs have been studied more extensively than inorganic PCMs or across multifunctional composites generally. (LLM, conf=0.82)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The sources with a verdict support this claim; the rest weren’t checked yet, have no full text we could read, or their verdicts aren’t rated yet.
In the paper
“To date, the most popular leak‐proof strategies are the construction of shape‐stabilized composite PCMs and core–shell composite PCMs.[ 12 , 13 , 14 , 15 , 16 , 17 , 18 , 19 , 20 ]”
§ Carbon‐Based Composite Phase Change Materials for Thermal Energy Storage, Transfer, and Conversion > Introduction Energy conservation has become an important issue for human activity. Among natural energy sources, thermal energy is conventionally considered a low‐grade type of energy and is generally treated as waste in industrial production. Although solar radiation continuously provides abundant thermal energy during the daytime, a large quantity is often wasted. If abundant thermal energy can be stored and released during supply and demand cycles, the consumption of fossil fuels can be reduced, which will greatly alleviate current energy and environmental issues. Thermal energy storage (TES) techniques are classified into thermochemical energy storage, sensible heat storage, and latent heat storage (LHS).[ 1 , 2 , 3 ] Comparatively, LHS using phase change materials (PCMs) is considered a better option because it can reversibly store and release large quantities of thermal energy from the surrounding environment with small temperature variation during the phase change process.[ 4 , 5 ] In contrast to inorganic PCMs, organic PCMs have been extensively studied in the preparation of high‐performance multifunctional composite PCMs.[ 6 , 7 , 8 ] However, although organic PCMs demonstrate great potential for enhancing energy utilization efficiency, their practical applications are hindered by liquid leakage, low thermal conductivity for phonon transmission, weak photoabsorption capacity for solar‐to‐thermal conversion and low electrical conductivity for electric‐to‐thermal conversion.[ 8 , 9 , 10 , 11 ] Liquid leakage from melted PCMs is potentially dangerous. To date, the most popular leak‐proof strategies are the construction of shape‐stabilized composite PCMs and core–shell composite PCMs.[ 12 , 13 , 14 , 15 , 16 , 17 , 18 , 19 , 20 ] Low thermal conductivity decelerates the thermal charging/discharging rates of PCMs. Originally, additives with high thermal conductivity were directly introduced into a system to obtain thermally conductive composite PCMs; however, the enhancement of thermal conductivity was generally limited. Moreover, this strategy inevitably reduces the TES density due to the occupation of the inherent pores.[ 4 , 15 , 21 , 22 , 23 , 24 , 25 , 26 , 27 ] To balance these two contradictions, 3D interconnected carbon materials have been considered as supports to encapsulate PCMs, which are competitive candidates for the preparation of composite PCMs with high thermal conductivity.[ 24 , 27 , 28 , 29 ] Additionally, to address the weak photoabsorption and low electrical conductivity of pristine PCMs, introducing carbonaceous materials into a system is one prospective method due to their excellent photoabsorption and high electrical conductivity. Relevant reports have also shown that introducing small amounts of carbon materials into pristine PCMs can effectively improve the photoabsorption and electrical conductivity of PCMs by constructing a carbon percolation network. Therefore, carbon‐based composite PCMs have become increasingly attractive in solar‐to‐thermal, electric‐to‐thermal, and even magnetic‐to‐thermal conversions.[ 8 , 11 , 29 , 30 , 31 , 32 , 33 , 34 ] Very recently, numerous high‐performance carbon‐based composite PCMs have been reported. Although there are some published reviews on composite PCMs,[ 4 , 35 , 36 , 37 , 38 , 39 , 40 , 41 , 42 , 43 , 44 ] they have mainly focused on thermal storage and thermal transfer enhancement, and the corresponding thermal enhancement mechanisms have mainly focused on structural level analysis and have lacked microscale phonon mechanism analysis.[ 4 , 26 , 43 ] An informative review providing constructive microscale phonon insights into advanced carbon‐based composite PCMs for thermal storage, thermal transfer, energy conversion, and advanced utilization does not exist. Herein, we summarize the recent advances in high‐performance carbon‐based composite PCMs for thermal storage, thermal transfer, energy conversion, and advanced utilization, which mainly include carbon nanotubes (CNTs), carbon fibers (CFs), graphene/GO/rGO, metal organic frameworks (MOFs)‐derived carbon, biomass‐derived carbon, expanded graphite (EG), and other carbon materials (Figure 1 ). In particular, we analyze the thermal transfer micromechanisms from the perspective of lattice vibration and phonon transmission. Finally, the perspectives and challenges in the development of high‐performance carbon‐based composite PCMs are highlighted.
What the sources say
- Not checked — no full text of the sourcecites [12] matched to “Experimental investigation of a cementitious heat storage medium incorporating a solar salt/diatomite composite phase change material” (2019) source
- Not checked — no full text of the sourcecites [13] matched to “Flexible monolithic phase change material based on carbon nanotubes/chitosan/poly(vinyl alcohol)” (2020) source
- Supportedcites [14] matched to “Toward Tailoring Chemistry of Silica-Based Phase Change Materials for Thermal Energy Storage” (2020) source
The “Package of PCMs” section identifies leakage during solid–liquid phase change as the problem and says the two most popular packaging strategies are porous packaging (shape-stabilized PCMs) and core–shell packaging (micro/nano-encapsulated PCMs). This directly supports the cited claim about popular leak-proof strategies. (LLM, conf=0.94)
- Supportedcites [15] matched to “Vertically aligned carbon fibers as supporting scaffolds for phase change composites with anisotropic thermal conductivity and good shape stability” (2019) source
The Introduction identifies two established approaches to preventing PCM leakage: impregnating PCMs into porous matrices and microencapsulating them with polymer or inorganic materials. These correspond to shape-stabilized and core–shell composites; the paper also demonstrates the leakage-proof behavior of its shape-stabilized composite in Section 3.5. (LLM, conf=0.87)
- Not checked yetcites [16] matched to “A novel low-temperature fabrication approach of composite phase change materials for high temperature thermal energy storage” (2019) source
Checked before — its earlier verdict is held back until a new check runs.
- Not checked — no full text of the sourcecites [17] matched to “Thermal enhancement and shape stabilization of a phase-change energy-storage material via copper nanowire aerogel” (2019) source
- Not checked — no full text of the sourcecites [18] matched to “A review on encapsulation techniques for inorganic phase change materials and the influence on their thermophysical properties” (2017) source
- Not checked — no full text of the sourcecites [19] matched to “In situ one-step construction of monolithic silica aerogel-based composite phase change materials for thermal protection” (2020) source
- Not checked — no full text of the sourcecites [20] matched to “Understanding molecular motion mechanism of phase change materials in mesoporous MCM-41” (2021) source
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on an assumption not shown here.
Every source the paper cites for this claim was checked and supports it.
In the paper
“Importantly, the thermal conductivity of composite PCMs was increased to 3.49 W mK−1 compared with that of paraffin (0.11 W mK−1).”
§ Carbon‐Based Composite Phase Change Materials for Thermal Energy Storage, Transfer, and Conversion > Carbon‐Based Composite PCMs for Thermal Energy Storage, Transfer, and Conversion > CNT‐Based Composite PCMs
What the sources say
- Supportedcites [26] matched to “Carbon nanotube-Cu foam hybrid reinforcements in composite phase change materials with enhanced thermal conductivity” (2019) source
The Conclusion reports that CNT–Cu foam reinforcement raised the composite’s thermal conductivity to 3.49 W m⁻¹ K⁻¹ from 0.105 W m⁻¹ K⁻¹ for paraffin, which rounds to 0.11. Section 3.2 separately reports 3.94 W m⁻¹ K⁻¹ for the long-CNT sample, so the paper is internally inconsistent about the composite value. (LLM, conf=0.88)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
Every source the paper cites for this claim was checked and supports it.
In the paper
“Considering these advantages, Montanari et al.[ 156 ] prepared PEG/DW composite PCMs with a latent heat of 76 J g−1.”
§ Carbon‐Based Composite Phase Change Materials for Thermal Energy Storage, Transfer, and Conversion > Carbon‐Based Composite PCMs for Thermal Energy Storage, Transfer, and Conversion > Biomass‐Derived Carbon‐Based Composite PCMs
What the sources say
- Supportedcites [156] matched to “Transparent Wood for Thermal Energy Storage and Reversible Optical Transmittance” (2019) source
The Results and Discussion, Thermal Properties section reports a latent heat of melting of about 76 J g−1 for the TW-TES composite; Table 1 gives 76.3 ± 3.4 J g−1. The same section describes the composite as molten PEG encapsulated in a wood template and surrounded by PMMA. No page number is provided in our copy. (LLM, conf=0.94)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
Every source the paper cites for this claim was checked and supports it.
In the paper
“This enhanced thermal conduction was attributed to the vertically aligned CFs.”
§ Carbon‐Based Composite Phase Change Materials for Thermal Energy Storage, Transfer, and Conversion > Carbon‐Based Composite PCMs for Thermal Energy Storage, Transfer, and Conversion > Biomass‐Derived Carbon‐Based Composite PCMs
What the sources say
- Supportedcites [15] matched to “Vertically aligned carbon fibers as supporting scaffolds for phase change composites with anisotropic thermal conductivity and good shape stability” (2019) source
The thermal-conductivity discussion states that the composites' enhanced axial conductivity is caused by vertically aligned carbon fibers serving as heat-conducting pathways. Section 2.1 identifies cotton as the raw material for those carbon-fiber scaffolds. (LLM, conf=0.95)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
75 more claims
Create a free account to see all 155 claims and to verify the 5 references still open.
- It may state two separate claims as one. 70
- Probably not a substantial claim. 8
- The quote only partly states this claim. 1
Citations
Cites
Superior Thermal Conductivity of Single-Layer Graphene
Balandin, A. A., Ghosh, S., Bao, W., Calizo, I., Teweldebrhan, D., Miao, F., & Lau, C. N. (2008) · Nano Letters · doi:10.1021/nl0731872 · Cited by 13,823
Thermal properties of graphene and nanostructured carbon materials
Balandin, A. A. (2011) · Nature Materials · doi:10.1038/nmat3064 · Cited by 6,244
Review on thermal energy storage with phase change materials and applications
Sharma, A., Tyagi, V. V., Chen, C. R., & Buddhi, D. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2007.10.005 · Cited by 5,936
Graphene oxide as a chemically tunable platform for optical applications
Loh, K. P., Bao, Q., Eda, G., & Chhowalla, M. (2010) · Nature Chemistry · doi:10.1038/nchem.907 · Cited by 3,340
A review on phase change energy storage: materials and applications
Farid, M. M., Khudhair, A. M., Razack, S. A. K., & Al-Hallaj, S. (2004) · Energy Conversion and Management · doi:10.1016/j.enconman.2003.09.015 · Cited by 3,097
Stable Metal–Organic Frameworks: Design, Synthesis, and Applications
Yuan, S., Feng, L., Wang, K., Pang, J., Bosch, M., Lollar, C., Sun, Y., Qin, J., Yang, X., Zhang, P., et al. (2018) · Advanced Materials · doi:10.1002/adma.201704303 · Cited by 2,981
Hydrothermal Route for Cutting Graphene Sheets into Blue‐Luminescent Graphene Quantum Dots
Pan, D., Zhang, J., Li, Z., & Wu, M. (2010) · Advanced Materials · doi:10.1002/adma.200902825 · Cited by 2,853
Zhu, S., Song, Y., Zhao, X., Shao, J., Zhang, J., & Yang, B. (2015) · Nano Research · doi:10.1007/s12274-014-0644-3 · Cited by 2,781
Mechanical properties of graphene and graphene-based nanocomposites
Papageorgiou, D. G., Kinloch, I. A., & Young, R. J. (2017) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.07.004 · Cited by 2,579
Tuning superconductivity in twisted bilayer graphene
Yankowitz, M., Chen, S., Polshyn, H., Zhang, Y., Watanabe, K., Taniguchi, T., Graf, D., Young, A. F., & Dean, C. R. (2019) · Science · doi:10.1126/science.aav1910 · Cited by 2,290
Research works printed but not linked: 3
- Franklin A., 2018, Stud. Hist. Philos. Sci. B, 64, 68
- 10.1016/j.ensm.2018.10.014 · DOI · Paper page
- 10.1016/j.carbon.2019.04.009 · DOI · Paper page
Cited by
Items 101–200 of 484
Shirbani, M., Siavashi, M., Hosseini, M., & Bidabadi, M. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.104744 · Cited by 43
Li, A., Wan, Y., Gao, Y., Tang, Z., Xu, J., Huang, M. J., Li, Y., Zhang, X., & Chen, X. (2022) · Materials Today Nano · doi:10.1016/j.mtnano.2022.100277 · Cited by 42
Self-citationYazdani, M. R., Kankkunen, A., Chatzikosmidou, D., et al. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2023.110363 · Cited by 39
“Notable examples include carbon nanofibers, carbon nanotubes, graphite nanoplatelets, graphene, expanded graphite, and other porous carbon-based materials obtained from polymer foams or biomass through a carbonization treatment [19 – 21].”
BackgroundLiu, Y., Li, X., Xu, Y., et al. (2024) · Journal of Materials Chemistry A · doi:10.1039/d4ta05612d · Cited by 41
Gui, H., Zhao, X., Zuo, S., et al. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c08176 · Cited by 37
Ma, Y., Wei, R., Zuo, H., Zuo, Q., Chen, Y., Wu, S., & Yang, H. (2023) · Energy · doi:10.1016/j.energy.2023.129001 · Cited by 40
Carbon-metal network boosting photon/phonon transport in photothermal phase change materials
Chen, X., Lin, J., Feng, Y., Chen, K., Qin, M., Han, S., Jiang, Y., Shen, Z., & Li, Y. (2025) · Carbon · doi:10.1016/j.carbon.2025.120192 · Cited by 42
Self-citationHe, Y., Zou, Y., Sun, L., Xu, F., Xia, Y., Chen, Y., Wang, S., Hu, Z., Hao, S., & Xiang, C. (2025) · Journal of Energy Storage · doi:10.1016/j.est.2025.116385 · Cited by 42
Li, F., Zhen, H., Li, L., Li, Y., Wang, Q., & Cheng, X. (2022) · Materials Today Energy · doi:10.1016/j.mtener.2022.100999 · Cited by 38
Review on bio-based shape-stable phase change materials for thermal energy storage and utilization
Wang, C., Cheng, C., Jin, T., & Dong, H. (2022) · Journal of Renewable and Sustainable Energy · doi:10.1063/5.0102005 · Cited by 38
Zhao, Y., Zhang, P., Qiu, Y. F., Li, Q., Yan, H., Wang, Z., & Wu, C. (2024) · DeCarbon · doi:10.1016/j.decarb.2024.100051 · Cited by 42
2D nanomaterial aerogels integrated with phase change materials: a comprehensive review
Rostami, S., Ghaffarkhah, A., Isari, A. A., Hashemi, S. A., & Arjmand, M. (2023) · Materials Advances · doi:10.1039/d3ma00049d · Cited by 37
Zhang, K., Hu, C., Huang, H., Li, B., Huang, C., & Wang, S. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.110214 · Cited by 39
Yao, Z., Wu, X., Zeng, Y., Li, S., Fu, T., Luo, Y., Zhang, G., Yang, W., & Li, X. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.110696 · Cited by 35
Wang, X., Ma, B., Yu, M., et al. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.114672 · Cited by 35
Ren, J., Zhang, W., Xuan, Z., Li, L., & Yuan, W. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.110180 · Cited by 38
Qian, C., Li, M.-J., Liu, Z.-M., Xue, H.-Y., & He, Y. (2024) · Energy storage materials · doi:10.1016/j.ensm.2024.103466 · Cited by 60
Wu, M., Xuan, Y., Liu, X., Jing, Y., & Li, T. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202506229 · Cited by 55
Liu, J., Chen, C., Li, X., et al. (2023) · Optics Express · doi:10.1364/oe.479755 · Cited by 34
Asim, N., Su’ait, M. S., Badiei, M., Mohammad, M., Akhtaruzzaman, M., Rajabi, A., Amin, N., & Ghazali, M. J. (2022) · Nanotechnology Reviews · doi:10.1515/ntrev-2022-0087 · Cited by 37
“nanostructure composites, is considered a versatile solution for these issues [177,183].”
BackgroundWang, M., Liu, G., Gao, H., Su, C., & Gao, J. Y. (2022) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2022.130808 · Cited by 36
Self-citationPolypyrrole‐boosted photothermal energy storage in MOF‐based phase change materials
Liu, P., Huang, M., Chen, X., Gao, Y. H., Li, Y., Cheng, D., & Wang, G. (2023) · Interdisciplinary materials · doi:10.1002/idm2.12092 · Cited by 49
Self-citationExploring electro-thermal conversion in phase change materials: A review
Jia, Z., Hu, C., Zhang, Y., Zhang, S., & Tang, B. (2023) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2023.107809 · Cited by 34
Liu, Z., Wang, J. F., He, G., & Yang, Z. (2024) · Advanced Composites and Hybrid Materials · doi:10.1007/s42114-024-01076-1 · Cited by 36
“There are three thermal conduction mechanisms in solid materials: electronic heat conduction, phonon heat conduction, and photon heat conduction [34, 35].”
Shen, Z., Kwon, S., Lee, H. L., Toivakka, M., & Oh, K. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.10.075 · Cited by 34
Dai, Z., Gao, Y., Wang, C., Wu, D., Jiang, Z., She, X., Ding, Y., Zhang, X., & Zhao, D. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c04429 · Cited by 38
A review of the recent advances in the heat transfer physics in latent heat storage systems
Sarath, K. P., Osman, M. F., Mukhesh, R., Manu, K. V., & Deepu, M. (2023) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2023.101886 · Cited by 51
Xie, F., Dai, X., Zhuo, L., Dai, Q., He, C., & Lu, Z. (2023) · Composite Structures · doi:10.1016/j.compstruct.2023.117479 · Cited by 32
Recent advancements in electro-thermal anti-/de-icing materials
Gao, H. M., Zhou, Y., Ma, J., et al. (2025) · RSC Advances · doi:10.1039/d5ra01330e · Cited by 32
“30”
Self-citationLiu, L., Niu, J., & Wu, J. (2021) · Materials · doi:10.3390/ma15010121 · Cited by 40
Ye, X., Yang, L., Tian, Z., Zhou, P., Wang, S., Sun, H., Zhu, Z., Li, J., Liang, W., & Li, A. (2022) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2022.111873 · Cited by 31
Dong, W., Wang, Y., Zhang, Z., et al. (2024) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2024.141235 · Cited by 31
Akgün, H., Yapıcı, E., Özkan, A., Günkaya, Z., & Banar, M. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.106619 · Cited by 35
Guo, H. Y., Hu, B., Shan, H., Li, Z., Qi, W., & Li, B. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.153361 · Cited by 36
Liu, M., Zhang, S., Shi, Y., Fang, Z., Wang, J., & Bao, C. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.156509 · Cited by 29
Liu, G., Shang, K., Chen, S., & Shen, J. (2025) · Composites Science and Technology · doi:10.1016/j.compscitech.2025.111120 · Cited by 31
Longitudinal confinement engineering in phase change materials
Feng, Y., Chen, K., Liu, P., Zhao, J., Li, Y., & Chen, X. (2025) · eScience · doi:10.1016/j.esci.2025.100454 · Cited by 39
Self-citationUpdates in phase change materials for thermoelectric devices: Status and challenges
Pandey, R., Thapa, P., Kumar, V., Zhu, Y., Wang, N., Bystrzejewski, M., & Tiwari, S. K. (2022) · Materialia · doi:10.1016/j.mtla.2022.101357 · Cited by 34
Khan, S. A., Li, X., Ni, S., Hussain, I., Liu, R., Thakur, A. K., Xu, F., Shen, Y.-L., An, A. K., & Zhao, J. (2025) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2025.115466 · Cited by 30
Huang, Z., Feng, J., & Zhuang, Y. (2025) · Journal of Energy Storage · doi:10.1016/j.est.2025.116200 · Cited by 29
Kim, J., Hong, M. Z., Lee, D., et al. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202514180 · Cited by 29
Self-citationA review on assessment of thermal conductivity enhancement strategies for phase change materials
Rahman, I. U., Khan, H., Khan, N., Manca, O., Buonomo, B., & Nardini, S. (2025) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2025.109644 · Cited by 44
An, G., Wu, S., Wang, L., Zhang, C., & Zhang, B. (2021) · Applied Energy · doi:10.1016/j.apenergy.2021.117991 · Cited by 29
Zhao, S., Yuan, A., Zhao, Y., Liu, T., Fu, X., Jiang, L., & Lei, J. (2022) · Energy and Buildings · doi:10.1016/j.enbuild.2022.111993 · Cited by 28
Yu, Z., Yu, W., Jiang, Y., Wang, Z., Zhao, W., & Liu, X. (2022) · ACS Applied Nano Materials · doi:10.1021/acsanm.2c02912 · Cited by 28
Double emulsion templates for efficient production of phase change microcapsules
Xiang, X., Gao, J., Wang, F., & Wang, L. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.154006 · Cited by 30
Gao, N., Du, J., Yang, W., Sun, B., Li, J., Xia, T. D., Li, Y., Yang, C., & Liu, X. (2024) · RSC Advances · doi:10.1039/d4ra03208j · Cited by 30
Progress and perspective on thermal conductivity enhancement of phase change materials
Wang, S., Du, R., & Li, T. (2024) · 中国科学通报:英文版 · doi:10.1016/j.scib.2024.08.028 · Cited by 33
Form-Stable Phase Change Material with Wood-Based Materials as Support
Hanif, F., Imran, M., Zhang, Y., Jia, Z., Lu, X., Lu, R., & Tang, B. (2023) · Polymers · doi:10.3390/polym15040942 · Cited by 30
“A few review articles on the characteristics and commercialization of various composite PCMs, such as carbon-based PCMs and nanoporous shape-stabilized PCMs, have previously been published [16,30].”
BackgroundZhao, Y., Shen, S., Wang, X., Cao, R., Jia, X., Niu, X., Liu, H., & Zhang, X. (2023) · Energy and Buildings · doi:10.1016/j.enbuild.2023.112933 · Cited by 29
A Dual Encapsulation Strategy for High‐Temperature Micro PCM Particles with High Cyclic Durability
Wang, K., Tao, K., Ye, F., Wang, T., & Xu, C. (2024) · Small · doi:10.1002/smll.202310252 · Cited by 27
Aerogels for Phase-Change Materials in Functional and Multifunctional Composites: A Review
Suchorowiec, K., Paprota, N., & Pielichowska, K. (2024) · Materials · doi:10.3390/ma17174405 · Cited by 34
“However, in some cases, the thermal conductivity improvement may be limited due to the significant interfacial thermal resistance between PCMs and conductive nanofillers [93].”
BackgroundYe, X., Yang, D., Yu, L., Jiang, P., Liu, W., & Lou, H. (2024) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2024.09.047 · Cited by 30
Irshad, M. S., Arshad, N., Maqsood, G., Asghar, M. S., Wu, P., Mushtaq, N., Shah, M. A. K. Y., Lin, L., Li, X., Ahmed, I., et al. (2024) · Small · doi:10.1002/smll.202407280 · Cited by 43
Xi, X., Tang, W., Wu, D., Shen, C., Ji, W., Li, J., Su, Y., Guo, X., Liu, R., & Yan, F. (2023) · ACS Sensors · doi:10.1021/acssensors.2c02608 · Cited by 28
Liu, S., Fei, X., Zhang, B., Zhao, H., & Wan, M. (2021) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2021.111484 · Cited by 27
Li, M., Wang, X., Odom, L., Bryce, K., Zhao, D. F., Shen, J., Ma, Z., Bae, C., Narayanan, S., & Lian, J. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c00546 · Cited by 25
Co/N co‐doped flower‐like carbon‐based phase change materials toward solar energy harvesting
Chen, X., Wang, L., Gao, Y. H., Li, Y., Zhang, X., Jiang, Y., & Wang, G. (2023) · Aggregate · doi:10.1002/agt2.413 · Cited by 32
Self-citationAtinafu, D. G., Kim, Y. U., Kim, S., Kang, Y., & Kim, S. (2023) · Small · doi:10.1002/smll.202305418 · Cited by 27
Cao, H., Li, S.-Z., Yang, J., Liu, Z., Bai, L., & Yang, W. M. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c12302 · Cited by 27
Das, M., Ura, D. P., Szewczyk, P. K., Berniak, K., Knapczyk‐Korczak, J., Marzec, M. M., Pichór, W., & Stachewicz, U. (2024) · Advanced Composites and Hybrid Materials · doi:10.1007/s42114-024-00934-2 · Cited by 30
“However, the liquid leakage of PCM during phase change, low thermal conductivity, and intrinsic rigidity of PCM are the main drawbacks that restrict its widespread applicability in different application areas [8, 9].”
Guan, J., & Chen, M. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.114268 · Cited by 31
Zhou, P., Wang, Y., & Zhang, X. (2023) · Composites Science and Technology · doi:10.1016/j.compscitech.2023.109916 · Cited by 25
Atinafu, D. G., Yun, B. Y., Wi, S., Chang, S. J., & Kim, S. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.106650 · Cited by 26
Design and Optimization of Composite Phase Change Material for Cylindrical Thermal Energy Storage
Tamraparni, A., Hoe, A., Deckard, M. E., Zhang, C., Malone, N., Elwany, A. H., Shamberger, P. J., & Felts, J. R. (2022) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2023.123995 · Cited by 32
Liu, R., Li, A., Liu, J., Liu, W. J., Zheng, H., Du, Q., Chen, X., & Cheng, D. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.145814 · Cited by 27
Self-citationLiu, X., Lin, F., Leng, G., Liu, M., Feng, J., Bai, Y., Guo, Z., Xu, Y., Sun, Z., Huang, Z., et al. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2023.108959 · Cited by 31
Jiang, L., Zhao, L., Zhang, R., Zhang, W., Ma, X., Niu, Z., Chen, G., & Li, M. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.109761 · Cited by 24
Pu, J., Du, J., Zhang, B., Rong, F., Jiao, F., & Hong, Y. (2024) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2024.104991 · Cited by 26
Gürgenç, E., Gür, M., Coşanay, H., Gürgenç, T., & Oztop, H. F. (2024) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2024.105628 · Cited by 26
Zhou, Y., Wang, Y., Li, M., Qin, Y. P., Yang, R., Xu, K., Guo, Y., Li, L., Zhang, Z., Zhang, J., et al. (2025) · Advanced Composites and Hybrid Materials · doi:10.1007/s42114-025-01308-y · Cited by 32
Nano‐Ag modified bio‐based shape‐stable phase change material for thermal energy storage
Ma, Y., Zou, M., Chen, W., Xiao, S., Luo, W., Zhou, J., Che, Y., Zu, S., Li, Q., Jiang, X., et al. (2022) · International Journal of Energy Research · doi:10.1002/er.8605 · Cited by 23
“However, the poor shape stability and low thermal conductivity make it difficult to apply on a full-scale.(12) Considerable studies have been devoted to overcoming the above-mentioned problems associated with solid– liquid PCM.”
BackgroundLi, Y., Gao, Y. W., Cao, X., Rong, X., Chen, B., Tian, G., Zhu, Z., Zhao, X., & Zhang, Z. (2023) · RSC Advances · doi:10.1039/d3ra04002j · Cited by 27
Xia, Q., Zhang, J., Zhang, N., Zhang, Z., Sun, Q., Yuan, Y., & Köten, H. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.111377 · Cited by 26
He, R., Fang, M., Zhou, J., Fei, H., & Yang, K. (2024) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2024.124257 · Cited by 24
Sustainable carbonized biomass-stabilized phase change materials for thermal energy storage
Muiruri, J. K., Bonillo, A. C., Zhang, M., Wang, P., Tomczak, N., Wu, W., Zhang, X., Wang, S., Thitsartarn, W., Ong, P. J., et al. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.114423 · Cited by 24
Firoozi, A. A., Firoozi, A. A., & Maghami, M. R. (2025) · Energy Conversion and Management X · doi:10.1016/j.ecmx.2025.101058 · Cited by 70
Recent Advances in Polymer‐Containing Multifunctional Phase‐Change Materials
Liu, C., Zhang, J., Liu, Q., Sun, W., Yu, Y. M., & Zhang, H. (2021) · ChemPlusChem · doi:10.1002/cplu.202100250 · Cited by 24
Zhao, Z., Chen, G., Liu, X., Shao, L., Xu, Y., Zhang, X., Li, Y., Yan, Z., & Zou, T. (2023) · Energy & Fuels · doi:10.1021/acs.energyfuels.3c00266 · Cited by 23
Dou, G., Xu, M., Hu, Y., et al. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.109212 · Cited by 23
Liu, Y., Li, M., Hassanien, R. H. E., et al. (2024) · Energy · doi:10.1016/j.energy.2024.130306 · Cited by 23
Mohan, M., Dewangan, S. K., Lee, K., & Ahn, B. (2024) · International Journal of Energy Research · doi:10.1155/2024/7490603 · Cited by 24
Recent Development of Thermal Insulating Materials for Li-Ion Batteries
Quan, T., Xia, Q., Wei, X., & Zhu, Y. (2024) · Energies · doi:10.3390/en17174412 · Cited by 22
Wang, H., Lei, J. H., Wu, T., Wu, D., Liu, H., Deng, Y., & Wu, F. (2022) · ACS Omega · doi:10.1021/acsomega.1c06502 · Cited by 22
Jiang, L., Lei, Y., Fu, X., Xu, H., Zhou, S., Chen, Y., & Lei, J. (2022) · Polymer · doi:10.1016/j.polymer.2022.124826 · Cited by 22
Liu, X., Kang, Z., Zhao, J., Huang, S., Zhang, Y., & He, M. (2022) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2022.112173 · Cited by 24
Nistor, C. L., Gîfu, I. C., Anghel, E. M., Ianchiş, R., Cirstea, D. C., Nicolae, C. A., Gabor, A. R., Atkinson, I., & Petcu, C. (2023) · Polymers · doi:10.3390/polym15143022 · Cited by 28
“In addition, the compacted MWCNTs-OH had a rather small value in comparison with the value for longitudinal direction [30].”
InfluentialGuo, Q., Liu, W., Yi, H., Jia, F., & Song, S. (2025) · Separation and Purification Technology · doi:10.1016/j.seppur.2025.133201 · Cited by 21
Adsorption separation of gaseous pollutants over porous carbon materials: a review
Zhu, R., Guo, J., Pang, H., Zhao, D. M., Liu, Q., & Liang, P. (2025) · Journal of the Energy Institute · doi:10.1016/j.joei.2025.102129 · Cited by 27
Lv, X., Tan, T., Cai, D., Zhou, X., Li, G., Zhu, W., & Cao, H. Q. (2023) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2023.112379 · Cited by 21
Zhao, J., Zhang, W., Lu, Q., Li, W., Li, W., Zhang, X., & Li, Q. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.148262 · Cited by 21
Qi, S., Tian, X., & Yuan, W. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202508204 · Cited by 21
Li, H., Hu, C., Wang, H. H., He, Y., Hu, X., & Tang, D. (2022) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2022.107709 · Cited by 20
Inhibition to dual enzyme-like activities of Ag/CeO2 nanozymes for the detection of thiourea
Jiang, H., Wang, B., Tang, R., et al. (2022) · Microchemical Journal · doi:10.1016/j.microc.2022.108251 · Cited by 20
Jia, Z., Chen, C., Zhou, Y., Irshad, M. S., Zhang, Q., Jiang, T., Shi, D., & You, J. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.142583 · Cited by 21
Advancements in sustainable phase change materials: Valorizing waste for eco-friendly applications
Wu, W., Yeap, I. S. R., Wang, S., Tomczak, N., Lin, M., Kai, D., Ye, E., Thitsartarn, W., Tan, J. B. H., Yin, X., et al. (2024) · Materials Today Chemistry · doi:10.1016/j.mtchem.2024.102163 · Cited by 31
Wang, G., Liu, L., Dou, S., Hu, X., Ge, S., Li, M., Zhang, X., & Wang, J. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.4c20402 · Cited by 20
Self-citationMohan, M., Manjunath, V., Mehdi, S. M. Z., Soni, S. K., Dewangan, S. K., Lee, H., Awasthi, A., Sharma, V. K., Sharma, A., Song, E., et al. (2025) · Energy storage materials · doi:10.1016/j.ensm.2025.104142 · Cited by 30
Das, M., & Stachewicz, U. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.113029 · Cited by 24
Metadata
- Authors
- Chen, X., Cheng, P., Tang, Z., Xu, X., Gao, H., & Wang, G.
- Affiliations
- Beijing Normal University (CN)
- University of Science and Technology Beijing (CN)
- Corresponding author
- Chen, Xiao
- Wang, Ge
- Venue
- Advanced Science
- Publisher
- Wiley
- Published
- 2021-03-03
- Volume
- 8
- Issue
- 9
- Pages
- 2001274-2001274
- ISSN
- 2198-3844 (ISSN-L)
- PMC
- PMC8097397
- OpenAlex
- W3135398377
- Cited by
- 483
- References
- 217
- Citations by year
- 2026: 69 · 2025: 121 · 2024: 111 · 2023: 97 · 2022: 62 · 2021: 23
- FWCI
- 6.20
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Advanced Science (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Fundamental Research Funds for the Central Universities (2019NTST29)
- National Natural Science Foundation of China (51902025)
- China Postdoctoral Science Foundation (2020T130060, 2019M660520)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Phase Change Materials Research
- Physical Sciences › Engineering › Mechanical Engineering › Adsorption and Cooling Systems
- Physical Sciences › Materials Science › Materials Chemistry › Thermal properties of materials
- Keywords
- phase change materials, carbon composite, thermal energy storage, thermal transfer, thermal energy conversion, thermal conductivity enhancement, shape-stabilized phase change materials, metal-organic framework derived carbon, solar thermal conversion, multifunctional materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.