Carbon-Based Composite Phase Change Materials for Thermal Energy Storage, Transfer, and Conversion
Open accessThe DOI matches its Crossref record; 214 of the 217 references it cites were found in a registry or an index; 15 of the 186 sources its claims cite were checked for support.
Abstract
Phase change materials (PCMs) can alleviate concerns over energy to some extent by reversibly storing a tremendous amount of renewable and sustainable thermal energy. However, the low thermal conductivity, low electrical conductivity, and weak photoabsorption of pure PCMs hinder their wider applicability and development. To overcome these deficiencies and improve the utilization efficiency of thermal energy, versatile carbon materials have been increasingly considered as supporting materials to construct shape-stabilized composite PCMs. Despite some carbon-based composite PCMs reviews regarding thermal conductivity enhancement, a comprehensive review of carbon-based composite PCMs does not exist. Herein, a systematic overview of recent carbon-based composite PCMs for thermal storage, transfer, conversion (solar-to-thermal, electro-to-thermal and magnetic-to-thermal), and advanced multifunctional applications, including novel metal organic framework (MOF)-derived carbon materials are provided. The current challenges and future opportunities are also highlighted. The authors hope this review can provide in-depth insights and serve as a useful guide for the targeted design of high-performance carbon-based composite PCMs.
Overview
CoChat Summary
TL;DR
This is a review of carbon-based composite phase change materials (PCMs) for thermal energy storage, heat transfer, and thermal energy conversion, with emphasis on how carbon structure and interface design affect performance. The paper argues that 3D interconnected carbon materials and tailored interfacial interactions are key to improving latent heat retention, thermal conductivity, and multifunctionality.
Key findings
- Pure PCMs have major practical limits: organic PCMs typically have low thermal conductivity of 0.15–0.30 W mK−1, while inorganic PCMs suffer from phase separation and supercooling; carbon additives are presented as a way to address these issues.
- The review reports that 3D carbon networks generally outperform 2D and 1D carbon materials for thermal transfer, with the stated tendency 3D > 2D > 1D, because they create continuous heat-transfer pathways and reduce interfacial resistance.
- Specific examples show large performance gains, e.g.:
- EG-loaded SA reached 2.50 W mK−1, about 9.6× pure SA, with heat release time 74.8% less than pure SA.
- EG-loaded paraffin reached 8.86 W mK−1, about 24× pure paraffin.
- Graphene foam/paraffin reached 0.62 W mK−1 and 200 J g−1 latent heat.
- For energy conversion, the paper reports several high efficiencies, including solar-to-thermal 92.3% for Fe3O4-GNS/PEG, electric-to-thermal 94.5% for a CNTs-penetrated porous network carbon system, and magnetic-to-thermal 41.7% for Fe3O4-GNS/PEG.
Methods
- Narrative review / systematic overview of recent literature on carbon-based composite PCMs, covering CNTs, CFs, graphene/GO/rGO, MOF-derived carbon, biomass-derived carbon, expanded graphite, and other porous carbons.
- The review organizes the field by PCM classification, confinement strategy, thermal transfer mechanisms, and application type: thermal storage, thermal transfer, and solar-/electric-/magnetic-to-thermal conversion.
- The main analysis is qualitative and mechanism-focused, including lattice vibration, phonon transmission, and phonon scattering, plus comparative discussion of reported studies and their numerical performance results.
Limitations
- The paper itself states that many areas still need further research: mechanistic studies are still insufficient, electric-to-thermal and magnetic-to-thermal efficiencies remain low, and more optimized calculation methods are needed because current efficiency calculations do not account for heat loss in the test setup.
- The text also notes that much of the field still lacks work on functional-group-modified pores, pore shapes, hierarchical pore distributions, and array-oriented synthesis strategies.
- Evident from the text: this is a review article, so it does not report a new experimental sample or primary dataset of its own.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures

![Figure 2 The working principle of solid–liquid PCMs. Reproduced with permission.[ 52 ] Copyright 2020, Elsevier.](https://figures.cochat.ai/paper-figures/05766de055724948923d1aa48967af45/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-2.jpg)
![Figure 3 Classification of PCMs based on chemical compositions. Reproduced with permission.[ 40 ] Copyright 2020, Elsevier.](https://figures.cochat.ai/paper-figures/8f646c37560c497dabd6d04a9b1caaae/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-3.jpg)
![Figure 4 Different dimensional confinement strategies of PCMs. Reproduced with permission.[ 46 ] Copyright 2018, Royal Society of Chemistry.](https://figures.cochat.ai/paper-figures/0ee72a946eeb48df9a137dc6fd713b16/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-4.jpg)
![Figure 5 a) Heat transfer scheme in crystal heat conduction. b) Spring vibration heat transfer system. c) Temperature curve with length and phonon energy diagram. d) Phonon scattering modes. e) Phonon–phonon collision modes: N and U processes. f) Phonon mean free pathways for three different phonon scattering modes. Reproduced with permission.[ 40 ] Copyright 2020, Elsevier.](https://figures.cochat.ai/paper-figures/7e3a5b51a7f94d6faa19e39cfe9296a7/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-5.jpg)


![Figure 8 a) Preparation diagram of PU@CNTs. b) Schematic illustration of thermal conduction in PU@CNTs along the axial and radial directions. c) SEM images of PU@CNTs‐10 from top surface, cross‐section, bottom surface, center, and edge. Reproduced with permission.[ 71 ] Copyright 2019, Elsevier. d) Simulated heat flux field distributions in paraffin‐based composite PCMs and schematic diagram for thermal conduction inside the pores in CF‐CNTs. Reproduced with permission.[ 26 ] Copyright 2019, Elsevier.](https://figures.cochat.ai/paper-figures/f3de8e604960475eafc9f62fb40c8afc/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-8.jpg)
![Figure 9 a) Schematic process for the solar‐to‐thermal conversion. b) SEM images of PET/PTA‐x CNTs coaxial fibers. Reproduced with permission.[ 72 ] Copyright 2019, American Chemical Society. c) Conceptual illustration of the cyclic, dramatic, and reversible electrical conductivity changes. Reproduced with permission.[ 73 ] Copyright 2015, American Chemical Society. d) The ball milling and chemical treatment processes. Reproduced with permission.[ 74 ] Copyright 2018, Elsevier. e) Infrared images of SA/CNTs sponge under the solar irradiation. Reproduced with permission.[ 75 ] Copyright 2018, Elsevier.](https://figures.cochat.ai/paper-figures/54527524c2b2451d858cd5f991facbd7/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-9.jpg)
![Figure 10 a) Formation mechanism of PEG/GNP. Reproduced with permission.[ 32 ] Copyright 2018, American Chemical Society. b,c) The role and formation process of C22@GO‐CNTs microcapsules. Reproduced with permission.[ 76 ] Copyright 2016, American Chemical Society. d) Scheme of electric‐ and solar‐driven CNTs‐based composite PCMs. e) Illustration of the paraffin molecules to CNTs in contact. Reproduced with permission.[ 77 ] Copyright 2012, American Chemical Society. f) Compressible aligned CNTs arrays and composite PCMs. Reproduced with permission.[ 78 ] Copyright 2013, American Chemical Society.](https://figures.cochat.ai/paper-figures/d2e186412f5b45638b7921ec6f2053c7/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-10.jpg)
![Figure 11 a) Preparation scheme of HDA‐g‐SWCNTs and HDA‐g‐MWCNTs. b) FLIR camera images of HDA‐g‐MWCNTs, and HDA‐g‐SWCNTs. c) Digital photos of the electrical conductivity experimental design and FLIR camera images of HDA‐g‐SWCNT film under 30 V. Reproduced with permission.[ 79 ] Copyright 2019, Elsevier.](https://figures.cochat.ai/paper-figures/11ae20a0801d4f1da39b0f627f795507/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-11.jpg)
![Figure 12 a) Preparation scheme of CNTs sponge. b,c) SEM and TEM images of CNTs sponge. d) Schematic illustration of the thermotherapy. e) Actual thermotherapy effect evaluation (left is a thermotherapy mask, right is a traditional mask). Reproduced with permission.[ 80 ] Copyright 2020, Elsevier.](https://figures.cochat.ai/paper-figures/865cef62ac5b4e62af9be51ea9af5261/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-12.jpg)
![Figure 13 a) Preparation scheme of carbon bonded CFs monolith. Reproduced with permission.[ 84 ] Copyright 2018, Elsevier. b) SEM images of the original cotton fiber and carbon.[ 15 ] Copyright 2019, Royal Society of Chemistry. c) EDS of composite PCMs. Reproduced with permission.[ 85 ] Copyright 2016, Elsevier. d) Simplified relationship model between PCMs and CFs. e) Effective thermal conductivities of composite PCMs prepared by hot‐press method and melt‐mixing method. Reproduced with permission.[ 86 ] Copyright 2015, Elsevier.](https://figures.cochat.ai/paper-figures/381b05b31ece4e51ac21d8cd2893a51d/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-13.jpg)
![Figure 14 a) The contact types between EG and CFs. Reproduced with permission.[ 87 ] Copyright 2016, Elsevier. b) Optical images of the laminates. Reproduced with permission.[ 88 ] Copyright 2018, Elsevier. c) Phase transition process observation at different time. Reproduced with permission.[ 89 ] Copyright 2016, Elsevier. d) Infrared images of composite PCMs with time. Reproduced with permission.[ 90 ] Copyright 2018, Elsevier.](https://figures.cochat.ai/paper-figures/f8414b055b0645e6acbe85d4107698a9/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-14.jpg)
![Figure 15 a) Preparation scheme of microencapsulated PCMs. Reproduced with permission.[ 107 ] Copyright 2018, Springer Nature. b) Thermal infrared images of pure PEG and composite PCMs during the heating and cooling processes. Reproduced with permission.[ 99 ] Copyright 2029, Elsevier. c) Preparation scheme of the graphene foam and graphene/paraffin composite PCMs. d) SEM image of graphene foam. e) SEM image of graphene/paraffin composite PCMs. Reproduced with permission.[ 109 ] Copyright 2016, Royal Society of Chemistry.](https://figures.cochat.ai/paper-figures/2d830fe7ed474e2d867246323506ff80/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-15.jpg)
![Figure 16 a) Preparation scheme of AGAs. b) Longitudinal view SEM images. c) Transversal view SEM images. d) Raman mappings of AGAs. Reproduced with permission.[ 112 ] Copyright 2018, Wiley‐VCH.](https://figures.cochat.ai/paper-figures/1bfc712ac3f74143b287624358fa415a/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-16.jpg)
![Figure 17 a) Preparation scheme of MCC/PEG/GNP composite PCMs. b) SEM images of MCC/GNP‐1.51 aerogel and MCC/PEG/GNP‐1.51 composite PCMs. Reproduced with permission.[ 100 ] Copyright 2019, Elsevier. c) Preparation scheme of the hybrid porous scaffolds and composite PCMs. Reproduced with permission.[ 113 ] Copyright 2018, American Chemical Society.](https://figures.cochat.ai/paper-figures/5ca585a23ea24c05ac27fb98a6d369fa/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-17.jpg)
![Figure 18 a) Schematic diagram of the structure and mechanism of different thermal conductivity effects. b) The formation process of 3D porous scaffolds. c) Solar‐to‐thermal energy conversion curves of PEG and composite PCMs. Reproduced with permission.[ 115 ] Copyright 2016, Royal Society of Chemistry. d) Preparation scheme of Ag‐GNS and Ag‐GNS/PEG composite PCMs. e) Schematic illustration of the solar‐to‐thermal energy conversion. Reproduced with permission.[ 106 ] Copyright 2019, Elsevier.](https://figures.cochat.ai/paper-figures/b35d76ae81e34047b200f331da2e9e0e/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-18.jpg)
![Figure 19 a) Thermal infrared images of HDA‐g‐GN under an infrared lamp and DC power supply. Reproduced with permission.[ 116 ] Copyright 2019, American Chemical Society. b) Preparation scheme of the MF‐templated hybrid aerogels. Reproduced with permission.[ 98 ] c) Scheme of the magnetic‐ and solar‐to‐thermal energy conversion and storage. d) Formation mechanism of Fe3O4‐GNS. e) Magnetic‐to‐thermal energy conversion curves (1.36 MHz and 550 A m−1). Reproduced with permission.[ 34 ] Copyright 2017, Royal Society of Chemistry.](https://figures.cochat.ai/paper-figures/6e089a559ce7479782d5b913876fe3ad/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-19.jpg)
![Figure 20 a) Preparation scheme of the graphene/PCMs smart fibers. b–e) Photograph and IR images of the aerogel‐directed smart fibers under an input voltage of 30 V. f,g) Photograph and IR images of the aerogel‐directed smart fibers under solar irradiation of 1.0 sun. Reproduced with permission.[ 120 ] Copyright 2018, Wiley‐VCH.](https://figures.cochat.ai/paper-figures/681cff145dcd4a509ed0ef59acd96cea/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-20.jpg)
![Figure 21 a) Preparation diagram of PEG/HPC composite PCMs. b) Formation mechanism of highly hierarchical porous carbon. c) XRD patterns of PEG/HPC‐1000 composite PCMs at various temperatures. d) DSC curves. e) Thermal conductivities and latent heats of pure PEG and PEG/HPC‐1000 composite PCMs. Reproduced with permission.[ 130 ] Copyright 2016, Royal Society of Chemistry.](https://figures.cochat.ai/paper-figures/92055b5634bf415ca14d793f5151c68c/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-21.jpg)
![Figure 22 a) Preparation diagram of PEG/NPC‐Al composite PCMs, b) TEM images of NPC‐Al. c) Schematic diagram of hydrogen bond interactions between doped nitrogen and PCMs molecules. d) Actual and calculated latent heat values. e) Supercooling characteristics. f) TES capabilities. g) Impregnation characteristics of composite PCMs. Reproduced with permission.[ 131 ] Copyright 2019, Elsevier.](https://figures.cochat.ai/paper-figures/0264414a959c45e8b067064386204ed9/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-22.jpg)
![Figure 23 a) Preparation diagram of SA/rGO/MOF‐5‐C composite PCMs. Reproduced with permission.[ 27 ] Copyright 2018, American Chemical Society. b) Preparation diagram of SA/CNTs/PC composite PCMs. TEM and SEM images: c) CNTs, d) CNTs/ZIF‐8, e) CNTs/PC. Reproduced with permission.[ 135 ] Copyright 2018, Elsevier.](https://figures.cochat.ai/paper-figures/c3f83107d3db486cb6b871d6fc6f9b5c/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-23.jpg)
![Figure 24 a) Preparation diagram of electric‐to‐thermal composite PCMs. b–d) TEM images of ZIF‐67/IRMOF‐3. Reproduced with permission.[ 138 ] Copyright 2020, Wiley‐VCH.](https://figures.cochat.ai/paper-figures/165d3d0623b5420e857163aa471e0cbb/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-24.jpg)
![Figure 25 a) Preparation diagram of wood‐derived carbon‐based composite PCMs. b) SEM images. Reproduced with permission.[ 157 ] Copyright 2018, Royal Society of Chemistry. c) Preparation diagram of adromischus cooperi‐derived carbon‐based composite PCMs. d) SEM images of spongy cell and palisade cell. Reproduced with permission.[ 159 ] Copyright 2019, Elsevier. e) Preparation diagram of cotton‐derived porous carbon. Reproduced with permission.[ 137 ] Copyright 2018, Royal Society of Chemistry.](https://figures.cochat.ai/paper-figures/ff933e46a5f64cd3bf4a8bc15ee05c6c/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-25.jpg)
![Figure 26 a) Preparation diagram of potato‐derived porous carbon. Reproduced with permission.[ 160 ] Copyright 2019, Elsevier. b) Photo of corn cob. c,d) SEM images of carbonized corn cob. Reproduced with permission.[ 166 ] Copyright 2014, Elsevier. e) Preparation diagram of FDC‐K. f) Thermal infrared images of SA and SA/FDC‐K. Reproduced with permission.[ 168 ] Copyright 2016, Wiley‐VCH.](https://figures.cochat.ai/paper-figures/49c9877995ce4d79b03177e15a3fa3a9/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-26.jpg)
![Figure 27 a) Preparation diagram of biological porous carbon. b) Preparation diagram of composite PCMs. Reproduced with permission.[ 161 ] Copyright 2018, Elsevier. c) SEM images of the original cotton fibers and carbon sponges. Reproduced with permission.[ 171 ] Copyright 2019, Elsevier. d) Preparation diagram of winter melon derived CAs and CAs/paraffin composite PCMs. e) Solar‐to‐thermal conversion curves of CAs/paraffin composite PCMs. Reproduced with permission.[ 158 ] Copyright 2014, Royal Society of Chemistry.](https://figures.cochat.ai/paper-figures/3ef39c4ae87b4aa5b316c5ace18c8453/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-27.jpg)
![Figure 28 Preparation diagram of the microencapsulated PCMs. Reproduced with permission.[ 173 ] Copyright 2017, Elsevier.](https://figures.cochat.ai/paper-figures/b40a50f8c795409391fe8d203816aaab/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-28.jpg)
![Figure 29 a) Preparation diagram of the microencapsulated PCMs. b) EDS mappings of the microencapsulated PCMs with different mass fractions of carbon. c) Thermal infrared images. Reproduced with permission.[ 174 ] Copyright 2018, Elsevier.](https://figures.cochat.ai/paper-figures/7937eddfb324416682f74312b7673ddd/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-29.jpg)
![Figure 30 a) Preparation diagram of composite PCMs. b) Schematic diagram of the deformation. c) Temperature‐time curves of composite PCMs. d) Schematic diagram of the bending deformation of composite PCMs. Reproduced with permission.[ 184 ] Copyright 2019, Elsevier.](https://figures.cochat.ai/paper-figures/657220b2d37f470c999900561ae6d656/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-30.jpg)
![Figure 31 a) Preparation diagram of the phase change macrocapsules. b) Different shapes of macrocapsules. c) Temperature‐time curves of phase change macrocapsules‐based heat sink with different shapes of flat, concave, convex, and folded structures. Reproduced with permission.[ 187 ] Copyright 2019, Elsevier.](https://figures.cochat.ai/paper-figures/bcde50f4bdbb4b8eb87d9513b4438b9c/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-31.jpg)
![Figure 32 a) Preparation diagram of N‐doped hierarchical porous carbon‐based composite PCMs. b,c) DSC curves of different composite PCMs. d) Crystallinities of different composite PCMs. Reproduced with permission.[ 134 ] Copyright 2019, Elsevier.](https://figures.cochat.ai/paper-figures/4a238b7a65bd4cf8a32bf22489652a55/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-32.jpg)
![Figure 33 a–c) Thermal infrared images of various composite PCMs. d) Temperature–time curves of pure PEG and composite PCMs. e,f) Thermal conductivities of pure PEG and composite PCMs. g) DSC curves of pure PEG and composite PCMs. h) Latent heat values of various composite PCMs. i) TEM image of CQDs‐derived porous carbon. Reproduced with permission.[ 24 ] Copyright 2018, Elsevier.](https://figures.cochat.ai/paper-figures/0eb97e957b5f48ddbdbcb976194619e8/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-33.jpg)
![Figure 34 a) Preparation diagram of composite PCMs and large‐size aligned graphite sheets. b) SEM image of 3D aligned and interconnected graphite nanoplatelets framework. c) Schematic diagram of the parallel model for the thermal conduction. d) Thermal effusivity comparison with the latest reports. Reproduced with permission.[ 207 ] Copyright 2019, Wiley‐VCH.](https://figures.cochat.ai/paper-figures/d23cff5e5ce246ff89e1114556386b92/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-34.jpg)
![Figure 35 a) Schematic diagram of composite PCMs for thermal comfort application. b) IR images of pure paraffin and CCF‐paraffin composite PCMs. c) IR images of pure paraffin, paraffin‐Al, and CCF‐paraffin composite PCMs. d) Photograph of a bent CCF‐paraffin composite heat pack. e,f) IR images of CCF‐paraffin composite heat pack on the human arm. Reproduced with permission.[ 209 ] Copyright 2018, American Chemical Society.](https://figures.cochat.ai/paper-figures/2ea5fe5bbfcd44699ead604df919c08a/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-35.jpg)
![Figure 36 a) Preparation diagram of PL‐functionalized composite PCMs. b) Fluorescent images of CQDs. c) HRTEM image of CQDs. d,e) DSC curves of MOF‐based composite PCMs. f–h) PL spectra of MOF‐based composite PCMs. Reproduced with permission.[ 128 ] Copyright 2019, Elsevier.](https://figures.cochat.ai/paper-figures/51e7ce6bac844bea8fff30937167951d/carbon-based-composite-phase-change-materials-for-thermal-energy-storage-figure-36.jpg)
Verification
Claims the paper makes
11 Valid · 3 Not valid · 108 Not checked · 33 Own results and interpretations
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“In contrast to inorganic PCMs, organic PCMs have been extensively studied in the preparation of high‐performance multifunctional composite PCMs.[ 6 , 7 , 8 ]”
§ Carbon‐Based Composite Phase Change Materials for Thermal Energy Storage, Transfer, and Conversion > Introduction Energy conservation has become an important issue for human activity. Among natural energy sources, thermal energy is conventionally considered a low‐grade type of energy and is generally treated as waste in industrial production. Although solar radiation continuously provides abundant thermal energy during the daytime, a large quantity is often wasted. If abundant thermal energy can be stored and released during supply and demand cycles, the consumption of fossil fuels can be reduced, which will greatly alleviate current energy and environmental issues. Thermal energy storage (TES) techniques are classified into thermochemical energy storage, sensible heat storage, and latent heat storage (LHS).[ 1 , 2 , 3 ] Comparatively, LHS using phase change materials (PCMs) is considered a better option because it can reversibly store and release large quantities of thermal energy from the surrounding environment with small temperature variation during the phase change process.[ 4 , 5 ] In contrast to inorganic PCMs, organic PCMs have been extensively studied in the preparation of high‐performance multifunctional composite PCMs.[ 6 , 7 , 8 ] However, although organic PCMs demonstrate great potential for enhancing energy utilization efficiency, their practical applications are hindered by liquid leakage, low thermal conductivity for phonon transmission, weak photoabsorption capacity for solar‐to‐thermal conversion and low electrical conductivity for electric‐to‐thermal conversion.[ 8 , 9 , 10 , 11 ] Liquid leakage from melted PCMs is potentially dangerous. To date, the most popular leak‐proof strategies are the construction of shape‐stabilized composite PCMs and core–shell composite PCMs.[ 12 , 13 , 14 , 15 , 16 , 17 , 18 , 19 , 20 ] Low thermal conductivity decelerates the thermal charging/discharging rates of PCMs. Originally, additives with high thermal conductivity were directly introduced into a system to obtain thermally conductive composite PCMs; however, the enhancement of thermal conductivity was generally limited. Moreover, this strategy inevitably reduces the TES density due to the occupation of the inherent pores.[ 4 , 15 , 21 , 22 , 23 , 24 , 25 , 26 , 27 ] To balance these two contradictions, 3D interconnected carbon materials have been considered as supports to encapsulate PCMs, which are competitive candidates for the preparation of composite PCMs with high thermal conductivity.[ 24 , 27 , 28 , 29 ] Additionally, to address the weak photoabsorption and low electrical conductivity of pristine PCMs, introducing carbonaceous materials into a system is one prospective method due to their excellent photoabsorption and high electrical conductivity. Relevant reports have also shown that introducing small amounts of carbon materials into pristine PCMs can effectively improve the photoabsorption and electrical conductivity of PCMs by constructing a carbon percolation network. Therefore, carbon‐based composite PCMs have become increasingly attractive in solar‐to‐thermal, electric‐to‐thermal, and even magnetic‐to‐thermal conversions.[ 8 , 11 , 29 , 30 , 31 , 32 , 33 , 34 ] Very recently, numerous high‐performance carbon‐based composite PCMs have been reported. Although there are some published reviews on composite PCMs,[ 4 , 35 , 36 , 37 , 38 , 39 , 40 , 41 , 42 , 43 , 44 ] they have mainly focused on thermal storage and thermal transfer enhancement, and the corresponding thermal enhancement mechanisms have mainly focused on structural level analysis and have lacked microscale phonon mechanism analysis.[ 4 , 26 , 43 ] An informative review providing constructive microscale phonon insights into advanced carbon‐based composite PCMs for thermal storage, thermal transfer, energy conversion, and advanced utilization does not exist. Herein, we summarize the recent advances in high‐performance carbon‐based composite PCMs for thermal storage, thermal transfer, energy conversion, and advanced utilization, which mainly include carbon nanotubes (CNTs), carbon fibers (CFs), graphene/GO/rGO, metal organic frameworks (MOFs)‐derived carbon, biomass‐derived carbon, expanded graphite (EG), and other carbon materials (Figure 1 ). In particular, we analyze the thermal transfer micromechanisms from the perspective of lattice vibration and phonon transmission. Finally, the perspectives and challenges in the development of high‐performance carbon‐based composite PCMs are highlighted.
What the sources say
- Not checked — no full text of the sourcecites [6] matched to “Smart Utilization of Multifunctional Metal Oxides in Phase Change Materials” (2020) source
- Not checked — no full text of the sourcecites [7] matched to “Advanced multifunctional composite phase change materials based on photo-responsive materials” (2021) source
- Partly supportedcites [8] matched to “Phase Change Materials for Electro-Thermal Conversion and Storage: From Fundamental Understanding to Engineering Design” (2020) sourceExperimental — accuracy not yet measured
The Introduction (page unavailable) calls high-performance electro-thermal composite PCMs a research focus, and the CNTs-based composite PCMs section (page unavailable) discusses single-organic-PCM composites. These passages support substantial study of organic-PCM composites, but they do not establish that organic PCMs have been studied more extensively than inorganic PCMs or across multifunctional composites generally. (LLM, conf=0.82)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The sources with a verdict support this claim; the rest weren’t checked yet, have no full text we could read, or their verdicts aren’t rated yet.
In the paper
“To date, the most popular leak‐proof strategies are the construction of shape‐stabilized composite PCMs and core–shell composite PCMs.[ 12 , 13 , 14 , 15 , 16 , 17 , 18 , 19 , 20 ]”
§ Carbon‐Based Composite Phase Change Materials for Thermal Energy Storage, Transfer, and Conversion > Introduction Energy conservation has become an important issue for human activity. Among natural energy sources, thermal energy is conventionally considered a low‐grade type of energy and is generally treated as waste in industrial production. Although solar radiation continuously provides abundant thermal energy during the daytime, a large quantity is often wasted. If abundant thermal energy can be stored and released during supply and demand cycles, the consumption of fossil fuels can be reduced, which will greatly alleviate current energy and environmental issues. Thermal energy storage (TES) techniques are classified into thermochemical energy storage, sensible heat storage, and latent heat storage (LHS).[ 1 , 2 , 3 ] Comparatively, LHS using phase change materials (PCMs) is considered a better option because it can reversibly store and release large quantities of thermal energy from the surrounding environment with small temperature variation during the phase change process.[ 4 , 5 ] In contrast to inorganic PCMs, organic PCMs have been extensively studied in the preparation of high‐performance multifunctional composite PCMs.[ 6 , 7 , 8 ] However, although organic PCMs demonstrate great potential for enhancing energy utilization efficiency, their practical applications are hindered by liquid leakage, low thermal conductivity for phonon transmission, weak photoabsorption capacity for solar‐to‐thermal conversion and low electrical conductivity for electric‐to‐thermal conversion.[ 8 , 9 , 10 , 11 ] Liquid leakage from melted PCMs is potentially dangerous. To date, the most popular leak‐proof strategies are the construction of shape‐stabilized composite PCMs and core–shell composite PCMs.[ 12 , 13 , 14 , 15 , 16 , 17 , 18 , 19 , 20 ] Low thermal conductivity decelerates the thermal charging/discharging rates of PCMs. Originally, additives with high thermal conductivity were directly introduced into a system to obtain thermally conductive composite PCMs; however, the enhancement of thermal conductivity was generally limited. Moreover, this strategy inevitably reduces the TES density due to the occupation of the inherent pores.[ 4 , 15 , 21 , 22 , 23 , 24 , 25 , 26 , 27 ] To balance these two contradictions, 3D interconnected carbon materials have been considered as supports to encapsulate PCMs, which are competitive candidates for the preparation of composite PCMs with high thermal conductivity.[ 24 , 27 , 28 , 29 ] Additionally, to address the weak photoabsorption and low electrical conductivity of pristine PCMs, introducing carbonaceous materials into a system is one prospective method due to their excellent photoabsorption and high electrical conductivity. Relevant reports have also shown that introducing small amounts of carbon materials into pristine PCMs can effectively improve the photoabsorption and electrical conductivity of PCMs by constructing a carbon percolation network. Therefore, carbon‐based composite PCMs have become increasingly attractive in solar‐to‐thermal, electric‐to‐thermal, and even magnetic‐to‐thermal conversions.[ 8 , 11 , 29 , 30 , 31 , 32 , 33 , 34 ] Very recently, numerous high‐performance carbon‐based composite PCMs have been reported. Although there are some published reviews on composite PCMs,[ 4 , 35 , 36 , 37 , 38 , 39 , 40 , 41 , 42 , 43 , 44 ] they have mainly focused on thermal storage and thermal transfer enhancement, and the corresponding thermal enhancement mechanisms have mainly focused on structural level analysis and have lacked microscale phonon mechanism analysis.[ 4 , 26 , 43 ] An informative review providing constructive microscale phonon insights into advanced carbon‐based composite PCMs for thermal storage, thermal transfer, energy conversion, and advanced utilization does not exist. Herein, we summarize the recent advances in high‐performance carbon‐based composite PCMs for thermal storage, thermal transfer, energy conversion, and advanced utilization, which mainly include carbon nanotubes (CNTs), carbon fibers (CFs), graphene/GO/rGO, metal organic frameworks (MOFs)‐derived carbon, biomass‐derived carbon, expanded graphite (EG), and other carbon materials (Figure 1 ). In particular, we analyze the thermal transfer micromechanisms from the perspective of lattice vibration and phonon transmission. Finally, the perspectives and challenges in the development of high‐performance carbon‐based composite PCMs are highlighted.
What the sources say
- Not checked — no full text of the sourcecites [12] matched to “Experimental investigation of a cementitious heat storage medium incorporating a solar salt/diatomite composite phase change material” (2019) source
- Not checked — no full text of the sourcecites [13] matched to “Flexible monolithic phase change material based on carbon nanotubes/chitosan/poly(vinyl alcohol)” (2020) source
- Supportedcites [14] matched to “Toward Tailoring Chemistry of Silica-Based Phase Change Materials for Thermal Energy Storage” (2020) source
The “Package of PCMs” section identifies leakage during solid–liquid phase change as the problem and says the two most popular packaging strategies are porous packaging (shape-stabilized PCMs) and core–shell packaging (micro/nano-encapsulated PCMs). This directly supports the cited claim about popular leak-proof strategies. (LLM, conf=0.94)
- Supportedcites [15] matched to “Vertically aligned carbon fibers as supporting scaffolds for phase change composites with anisotropic thermal conductivity and good shape stability” (2019) source
The Introduction identifies two established approaches to preventing PCM leakage: impregnating PCMs into porous matrices and microencapsulating them with polymer or inorganic materials. These correspond to shape-stabilized and core–shell composites; the paper also demonstrates the leakage-proof behavior of its shape-stabilized composite in Section 3.5. (LLM, conf=0.87)
- Not checked yetcites [16] matched to “A novel low-temperature fabrication approach of composite phase change materials for high temperature thermal energy storage” (2019) source
Checked before — its earlier verdict is held back until a new check runs.
- Not checked — no full text of the sourcecites [17] matched to “Thermal enhancement and shape stabilization of a phase-change energy-storage material via copper nanowire aerogel” (2019) source
- Not checked — no full text of the sourcecites [18] matched to “A review on encapsulation techniques for inorganic phase change materials and the influence on their thermophysical properties” (2017) source
- Not checked — no full text of the sourcecites [19] matched to “In situ one-step construction of monolithic silica aerogel-based composite phase change materials for thermal protection” (2020) source
- Not checked — no full text of the sourcecites [20] matched to “Understanding molecular motion mechanism of phase change materials in mesoporous MCM-41” (2021) source
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on an assumption not shown here.
Every source the paper cites for this claim was checked and supports it.
In the paper
“Importantly, the thermal conductivity of composite PCMs was increased to 3.49 W mK−1 compared with that of paraffin (0.11 W mK−1).”
§ Carbon‐Based Composite Phase Change Materials for Thermal Energy Storage, Transfer, and Conversion > Carbon‐Based Composite PCMs for Thermal Energy Storage, Transfer, and Conversion > CNT‐Based Composite PCMs
What the sources say
- Supportedcites [26] matched to “Carbon nanotube-Cu foam hybrid reinforcements in composite phase change materials with enhanced thermal conductivity” (2019) source
The Conclusion reports that CNT–Cu foam reinforcement raised the composite’s thermal conductivity to 3.49 W m⁻¹ K⁻¹ from 0.105 W m⁻¹ K⁻¹ for paraffin, which rounds to 0.11. Section 3.2 separately reports 3.94 W m⁻¹ K⁻¹ for the long-CNT sample, so the paper is internally inconsistent about the composite value. (LLM, conf=0.88)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
Every source the paper cites for this claim was checked and supports it.
In the paper
“Considering these advantages, Montanari et al.[ 156 ] prepared PEG/DW composite PCMs with a latent heat of 76 J g−1.”
§ Carbon‐Based Composite Phase Change Materials for Thermal Energy Storage, Transfer, and Conversion > Carbon‐Based Composite PCMs for Thermal Energy Storage, Transfer, and Conversion > Biomass‐Derived Carbon‐Based Composite PCMs
What the sources say
- Supportedcites [156] matched to “Transparent Wood for Thermal Energy Storage and Reversible Optical Transmittance” (2019) source
The Results and Discussion, Thermal Properties section reports a latent heat of melting of about 76 J g−1 for the TW-TES composite; Table 1 gives 76.3 ± 3.4 J g−1. The same section describes the composite as molten PEG encapsulated in a wood template and surrounded by PMMA. No page number is provided in our copy. (LLM, conf=0.94)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
Every source the paper cites for this claim was checked and supports it.
In the paper
“This enhanced thermal conduction was attributed to the vertically aligned CFs.”
§ Carbon‐Based Composite Phase Change Materials for Thermal Energy Storage, Transfer, and Conversion > Carbon‐Based Composite PCMs for Thermal Energy Storage, Transfer, and Conversion > Biomass‐Derived Carbon‐Based Composite PCMs
What the sources say
- Supportedcites [15] matched to “Vertically aligned carbon fibers as supporting scaffolds for phase change composites with anisotropic thermal conductivity and good shape stability” (2019) source
The thermal-conductivity discussion states that the composites' enhanced axial conductivity is caused by vertically aligned carbon fibers serving as heat-conducting pathways. Section 2.1 identifies cotton as the raw material for those carbon-fiber scaffolds. (LLM, conf=0.95)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
75 more claims
Create a free account to see all 155 claims and to verify the 5 references still open.
- It may state two separate claims as one. 70
- Probably not a substantial claim. 8
- The quote only partly states this claim. 1
Citations
Cites
Superior Thermal Conductivity of Single-Layer Graphene
Balandin, A. A., Ghosh, S., Bao, W., Calizo, I., Teweldebrhan, D., Miao, F., & Lau, C. N. (2008) · Nano Letters · doi:10.1021/nl0731872 · Cited by 13,823
Thermal properties of graphene and nanostructured carbon materials
Balandin, A. A. (2011) · Nature Materials · doi:10.1038/nmat3064 · Cited by 6,244
Review on thermal energy storage with phase change materials and applications
Sharma, A., Tyagi, V. V., Chen, C. R., & Buddhi, D. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2007.10.005 · Cited by 5,936
Graphene oxide as a chemically tunable platform for optical applications
Loh, K. P., Bao, Q., Eda, G., & Chhowalla, M. (2010) · Nature Chemistry · doi:10.1038/nchem.907 · Cited by 3,340
A review on phase change energy storage: materials and applications
Farid, M. M., Khudhair, A. M., Razack, S. A. K., & Al-Hallaj, S. (2004) · Energy Conversion and Management · doi:10.1016/j.enconman.2003.09.015 · Cited by 3,097
Stable Metal–Organic Frameworks: Design, Synthesis, and Applications
Yuan, S., Feng, L., Wang, K., Pang, J., Bosch, M., Lollar, C., Sun, Y., Qin, J., Yang, X., Zhang, P., et al. (2018) · Advanced Materials · doi:10.1002/adma.201704303 · Cited by 2,981
Hydrothermal Route for Cutting Graphene Sheets into Blue‐Luminescent Graphene Quantum Dots
Pan, D., Zhang, J., Li, Z., & Wu, M. (2010) · Advanced Materials · doi:10.1002/adma.200902825 · Cited by 2,853
Zhu, S., Song, Y., Zhao, X., Shao, J., Zhang, J., & Yang, B. (2015) · Nano Research · doi:10.1007/s12274-014-0644-3 · Cited by 2,781
Mechanical properties of graphene and graphene-based nanocomposites
Papageorgiou, D. G., Kinloch, I. A., & Young, R. J. (2017) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.07.004 · Cited by 2,579
Tuning superconductivity in twisted bilayer graphene
Yankowitz, M., Chen, S., Polshyn, H., Zhang, Y., Watanabe, K., Taniguchi, T., Graf, D., Young, A. F., & Dean, C. R. (2019) · Science · doi:10.1126/science.aav1910 · Cited by 2,290
Research works printed but not linked: 3
- Franklin A., 2018, Stud. Hist. Philos. Sci. B, 64, 68
- 10.1016/j.ensm.2018.10.014 · DOI · Paper page
- 10.1016/j.carbon.2019.04.009 · DOI · Paper page
Cited by
Items 201–300 of 484
Carbon-Based Thermal Management Solutions and Innovations for Improved Battery Safety: A Review
Tawiah, B., Ofori, E. A., Chen, D., Ming, Y., Hou, Y., Jia, H., & Fei, B. (2025) · Batteries · doi:10.3390/batteries11040144 · Cited by 21
“Carbon-based phase change composites (CDPCCs) combine the thermal energy storage capabilities of phase change materials (PCMs) with the increased features of carbon-based structures [84,85].”
Kang, Z., Xu, J., Liu, H., Lin, Y., Liu, X., & He, M. (2022) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2022.111744 · Cited by 21
Wang, K., Yan, T., Meng, L., & Pan, W.-G. (2023) · Solar RRL · doi:10.1002/solr.202300447 · Cited by 21
Geng, X., Hu, Y., Pan, H., Wang, C., Liu, Z., & He, X. (2024) · Polymer · doi:10.1016/j.polymer.2024.127023 · Cited by 19
Zheng, H., Li, P., Luo, J., Wang, Z., Wang, J., Ma, S., Guo, W., & Wang, J. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.166055 · Cited by 18
Ahangar, A. M., Rahmani, A., Maleki, M., Ahmadi, R., & Razavi, S. H. (2024) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2024.113084 · Cited by 21
Huang, Y., Yang, X., Li, J., Niu, Y., Xiao, G., Shen, C., Qi, X., Ma, X., Ma, P., Yong, Z., et al. (2025) · ACS Nano · doi:10.1021/acsnano.5c11221 · Cited by 20
Çebi, D., Çeliktaş, M. S., & Sarptaş, H. (2022) · Circular Economy and Sustainability · doi:10.1007/s43615-022-00148-y · Cited by 26
Enhancement of Effective Thermal Conductivity of Rgo/Mg Nanocomposite Packed Beds
Kim, D.-M., Han, D. J., Heo, T. W., Kang, S., Wood, B. C., Lee, J., Cho, E. S., & Lee, B. J. (2022) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2022.122891 · Cited by 19
Zhang, Q., Zhang, Z., Xia, W., Zhou, Y., & Yang, H. (2023) · Fuel · doi:10.1016/j.fuel.2023.128499 · Cited by 20
Hao, S., Zou, Y., Xiang, C., Sun, L., Xu, F., & Hu, Z. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.108615 · Cited by 19
Two-dimensional nanosheets enhanced phase-change materials for thermal management applications
Li, S.-Y., Yan, T., & Pan, W.-G. (2024) · Cell Reports Physical Science · doi:10.1016/j.xcrp.2024.102046 · Cited by 26
Yang, X., Zhao, J., Liao, T., Li, W., Zhang, Y., Xu, C., Zhang, X., & Li, Q. (2024) · Journal of Materials Chemistry C · doi:10.1039/d4tc03006k · Cited by 18
Long, P., Cheng, J., Wei, J., et al. (2024) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2024.135957 · Cited by 17
Zhang, G., Ren, S., Cheng, D., Dong, W., Du, Q., Chen, X., & Li, A. (2025) · Composites Science and Technology · doi:10.1016/j.compscitech.2025.111228 · Cited by 19
Self-citationFunctionalized Polyethylene Glycol Composite Phase Change Materials: A Review
Sun, Q., Jiang, Y., Zhang, N., Ju, F., & Yuan, Y. (2025) · Advanced Engineering Materials · doi:10.1002/adem.202501430 · Cited by 23
Teng, X., Ye, C., Zhang, S., & Ye, J. (2026) · ACS Nano · doi:10.1021/acsnano.5c17391 · Cited by 17
Dong, L., Zhai, F., Wang, H., Peng, C., Feng, Y., & Feng, W. (2022) · Energy Materials · doi:10.20517/energymater.2022.26 · Cited by 22
The emerging coupled low-PGM and PGM-free catalysts for oxygen reduction reaction
Zhou, Y., Wang, N., Xing, L., Zhang, X., Zhong, R., Peng, Y., Chen, Y., Ye, S., Xie, X., & Du, L. (2022) · Chem Catalysis · doi:10.1016/j.checat.2022.12.001 · Cited by 22
Zheng, H., Zheng, Y., Ouyang, M., et al. (2024) · Optics Express · doi:10.1364/oe.517111 · Cited by 17
Yu, Z., Li, X., Wang, J., & Zhang, S. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.111511 · Cited by 18
Kong, X., Fu, Y., & Yuan, J. (2024) · Renewable Energy · doi:10.1016/j.renene.2024.121253 · Cited by 17
Moulakhnif, K., Moujoud, Z., Majd, A. E., Ousaleh, H. A., Faik, A., Sair, S., & Bouari, A. E. (2025) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2025.107750 · Cited by 18
Dananjaya, V., Bao, X., Hansika, N., & Abeykoon, C. (2025) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2025.127696 · Cited by 25
Wang, Y., Shi, J., Sheng, L., & Chen, Z. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.141051 · Cited by 16
Jiang, F., Wang, H., Hu, Y., et al. (2023) · Renewable Energy · doi:10.1016/j.renene.2023.119584 · Cited by 16
Nguyen, G. T., Tam, L. M., & Nhung, T. T. (2024) · ACS Omega · doi:10.1021/acsomega.3c07298 · Cited by 19
Hao, S., Zhan, Y., Li, W., et al. (2024) · Advanced Engineering Materials · doi:10.1002/adem.202301948 · Cited by 16
Jiang, L., Li, M., Sheng, J., et al. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.4c11296 · Cited by 16
Huang, L., Ning, J., Yang, Y., Tian, C., Lv, J., Zeng, F., Liu, Q., Zhao, F., Cai, X., & Kong, W. (2022) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.2c00110 · Cited by 16
Nazari, N., Allahbakhsh, A., & Bahramian, A. R. (2022) · International Journal of Energy Research · doi:10.1002/er.8323 · Cited by 16
Mao, Y., Li, J., Yang, X., Tao, K., Sun, K., Chen, S., & Zheng, Y. (2025) · Journal of Energy Storage · doi:10.1016/j.est.2025.115803 · Cited by 17
Jin, Z., Cao, Z., Jin, L., Ding, S., & Xi, K. (2026) · Nano-Micro Letters · doi:10.1007/s40820-025-02023-5 · Cited by 23
“This demand spans sustainable energy applications through next-generation batteries [1–4], supercapacitors [5–8], and electro-chemical conversion systems [9, 10], as well as frontier biomedical domains.”
Han, D., Yang, L., Wang, S.-P., Zeng, X., Tang, L., Liu, K., Liang, K., Shentu, H.-Q., Guo, L.-Q., Bai, L., et al. (2021) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-021-07371-7 · Cited by 14
“Latent heat energy storage (LHES) is an advanced energy storage technology, which can achieve energy storage and release during the phase transformation process of phase change materials (PCMs) without additional power input [3, 4].”
BackgroundYan, J., Hu, D., Ma, W., & Chen, W. (2022) · International Journal of Energy Research · doi:10.1002/er.8635 · Cited by 16
Anisotropic Black Phosphorene Structural Modulation for Thermal Storage and Solar‐Thermal Conversion
Wang, Y., Chen, Y., Dai, W., Zhang, Z., Kong, X., Li, M., Li, L., Gong, P., Chen, H., Ruan, X., et al. (2023) · Small · doi:10.1002/smll.202303933 · Cited by 17
Shi, L., Huang, C., Zheng, N., Chen, J., Ning, R., Huang, Z., Deng, N., Fang, X., Zhou, T. F., & Sun, Z. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.109892 · Cited by 15
Largani, S. P. H., Kenari, H. S., Nabavi, S. R., & Darzi, A. A. R. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2023.110351 · Cited by 16
Passive dimming phase change material inspired by polymer hydrogels
Zhang, H., He, W., Wang, R., Cao, B., Chen, S., Wang, L., Fang, Q., & Wang, N. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.150653 · Cited by 15
Guo, X., Liu, J., Gao, L., Zhong, Y., Yang, S., Liu, Y., Fan, Y., Tian, X., Gao, X., Guo, X., et al. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.160458 · Cited by 15
Li, A., Hai, G., Cheng, P., Chen, X., Zhang, X., Jiang, Y., Gao, Y. H., Huang, M., & Wan, Y. (2021) · Ceramics International · doi:10.1016/j.ceramint.2021.05.074 · Cited by 15
Self-citationAdvances in functional applications of biomass-derived carbon composites for phase change materials
Liu, X., Lin, J., Zhao, Z., Min, Y., Song, J., Li, B., & Huang, J. (2025) · Microstructures · doi:10.20517/microstructures.2024.109 · Cited by 19
Progress and Prospective of Thermal Interface Materials for Thermal Management
Zhao, Z., Wang, S., & Li, T. (2025) · IET Smart Energy Systems · doi:10.1049/ses2.70004 · Cited by 14
Toward High‐Thermal‐Conductivity Polymer‐Based Materials: Breakthroughs and Barriers
Liu, Y., Fang, Z., Liu, Y., & Zhao, N. (2025) · Polymer Composites · doi:10.1002/pc.70362 · Cited by 16
Vali, P. S. N. M., Murali, G., Kurhade, A. S., Elumalai, P. V., Murugan, M., Yong, X., & Prabhakar, S. (2025) · Energy Science & Engineering · doi:10.1002/ese3.70281 · Cited by 18
“The integration process is more beneficial when CQDs are included in PCMs as the latter have a remarkable thermal conductivity attributed to the nanoscale structure and the larger surface area which enhances the transfer of heat inside the composite PCM [38].”
Li, Z., Zhang, Z.-K., Wang, X., et al. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.108529 · Cited by 14
Wang, Z., Liu, M., Chang, Y., et al. (2023) · Ceramics International · doi:10.1016/j.ceramint.2023.08.339 · Cited by 14
Phase change energy storage using boron nitride/carbonized loofah sponge
Xiao, J., Zou, B., Zhong, F., Liu, C., Qiao, W., Ding, M., & Jia, C. (2024) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2024.124182 · Cited by 12
Gowthami, D., Sharma, R. K., Kar, T., Sarı, A., Arslanoğlu, H., Eren, S., & Gençel, O. (2025) · Journal of Energy Storage · doi:10.1016/j.est.2025.116370 · Cited by 13
Kumar, R., Nirwan, A., Mondal, B., Kumar, R., & Dixit, A. (2022) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-021-11180-9 · Cited by 14
“Thus, the use of ExG in PD-ExG composite will improve the overall thermal conductivity of the composite, leading to efficient thermal energy transfer rates, desirable for low-temperature thermal energy storage applications such as space cooling applications [37].”
BackgroundMethodMiao, Y., Fu, C., Li, L., et al. (2023) · Composites Science and Technology · doi:10.1016/j.compscitech.2023.109972 · Cited by 14
Graphene-based phase-change composites for thermal energy storage, conversion, and applications
Li, W. Q., Zhang, T., Liu, Y., Yang, Z., Yang, Z., Wang, Y., Ye, Y., & Fan, J. (2025) · Journal of Energy Storage · doi:10.1016/j.est.2025.116619 · Cited by 16
Robust organic radical cations with near-unity absorption across solar spectrum
Zhang, S., Huang, W., Zhu, Y., Wang, J., Cao, F., Zhang, Q., Zhao, E., & He, Z. (2025) · Nature Communications · doi:10.1038/s41467-025-62581-5 · Cited by 17
He, X., Qiu, J., Wang, W., Hou, Y., & Shuai, Y. (2023) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2023.112628 · Cited by 13
Shape-stabilized phase change materials for thermal energy storage and heat dissipation
Jiang, Z., Liu, X., He, F., Li, Y., Chen, Z., Li, X., Wang, P., He, G., & Yang, W. (2024) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2024.133559 · Cited by 14
Enhanced flame-retardant phase change materials with good shape stability for thermal management
Zhang, J., Zhang, J., Zhang, J., et al. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.113347 · Cited by 13
Kalidasan, B., Pandey, A. K., Rajamony, R. K., Sharma, K., Fatehmulla, A., & Buddhi, D. (2024) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2024.126392 · Cited by 13
Tan, C., Zhang, M., Yang, J., Wang, X., Zhao, W., Li, J., Zhao, Q., & Tian, X. (2025) · Journal of Energy Storage · doi:10.1016/j.est.2025.115635 · Cited by 14
Wang, W., Jiang, T., Guo, S., Song, F., Yu, Y., Wang, Q., Dong, N., & Nie, B. (2025) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2025.138159 · Cited by 15
Chen, Z., Gu, X., Guo, Y., Wang, X., Shao, M., Dong, B., & Kang, Z. (2021) · SusMat · doi:10.1002/sus2.23 · Cited by 13
Intelligent de-icing epoxy coating surface using bionics secreting oil microcapsules
Wang, S., Su, J., Wang, X., et al. (2023) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2023.132215 · Cited by 13
An overview on Phase Change Material incorporated in convective solar dryers
Krishna, V. S., Jain, S. K., Panwar, N. L., & Sree, R. (2025) · Journal of Energy Storage · doi:10.1016/j.est.2025.117486 · Cited by 21
Salimi, M., Nardo, L. D., & Carvelli, V. (2025) · Energy and Buildings · doi:10.1016/j.enbuild.2025.116099 · Cited by 14
Bu, W., Tan, W., Wu, X., Fan, D., & Ding, Z. (2025) · Journal of Energy Storage · doi:10.1016/j.est.2025.119640 · Cited by 15
Fan, D., Zhao, M., Yin, S., Peng, X., Zhang, G., & Peng, H. (2026) · Advanced Functional Materials · doi:10.1002/adfm.202531090 · Cited by 29
Novel 3D Printing Phase Change Aggregate Concrete: Mechanical and Thermal Properties Analysis
Jiang, J., Zheng, C., Wang, F., Xu, W., Wang, L., Chen, Z., & Su, W. C. (2022) · Materials · doi:10.3390/ma15238393 · Cited by 14
Transport properties of ZIF-8 nanocrystals for hydrogen adsorption: Molecular dynamics study
He, H., Feng, D., Zhang, X., & Feng, Y. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.108270 · Cited by 14
Brychka, S., Brychka, A., Hedin, N., & Mondeshki, M. (2024) · Materials · doi:10.3390/ma17091978 · Cited by 13
Li, M., Wang, X., Shen, J., Zhao, D. F., & Lian, J. (2024) · Applied Physics Reviews · doi:10.1063/5.0165697 · Cited by 21
Liu, Y., Li, M., Ma, X., Zhang, Y., Wang, Y., Li, G., Tang, R., Zhang, S., Zhao, H., & Zhu, Y. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.155235 · Cited by 30
Hui, S., Zhang, H., Xu, G., et al. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.114661 · Cited by 12
Zhou, C., Zeng, S., Liu, B., Yu, T., Qiu, J., & Du, J. (2025) · Carbon · doi:10.1016/j.carbon.2025.120476 · Cited by 11
Wu, Q., Kang, Y., Tang, Z., Cui, L., Yan, X., & Ni, Z. (2025) · Diamond and Related Materials · doi:10.1016/j.diamond.2025.112561 · Cited by 12
Self-citationZhou, Y. M., Liu, Y., Zhang, H., et al. (2025) · Energy · doi:10.1016/j.energy.2025.138447 · Cited by 11
Geng, L., Xiao, T., Cao, Y., et al. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.168321 · Cited by 11
Wan, X., Xia, X., Chen, Y., et al. (2024) · Polymers · doi:10.3390/polym16060805 · Cited by 11
Enhancement of thermal properties of phase change composites by copper film-coated carbon fiber felt
Gong, P., Guo, P., & Liu, F. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.111568 · Cited by 11
Liao, T., Li, W., Zhao, J., Yang, X., Zhang, W., Zou, J., Zhao, B., Zhang, X., & Li, Q. (2024) · Advanced Materials Technologies · doi:10.1002/admt.202400259 · Cited by 11
Zhao, N., Wei, S., Shen, Z., Lü, Y., Gao, W., & Bai, H. (2024) · ACS Applied Nano Materials · doi:10.1021/acsanm.4c03797 · Cited by 11
Thermally conductive phase change nanocomposites presenting PS-PEG/SeO2 and PS-PEG/BN/SeO2
Mutlu, S., Ortaç, B., Baskan, T., Yılmaz, S. S., & Yılmaz, A. H. (2024) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2024.176291 · Cited by 11
Li, Y., Yan, H., Yang, F., Li, S., Jiang, C., & Xie, L. (2024) · ChemistrySelect · doi:10.1002/slct.202404879 · Cited by 13
Insights into the roles of natural graphite in phase change materials
Tang, Z., Huang, D., Zhang, X., Wang, B., Yu, S., Guo, R., Sun, Q., & Wang, J. (2025) · EcoEnergy · doi:10.1002/ece2.93 · Cited by 12
“18,30 By creating low interfacial thermal resistance, the network inter-penetrating structure of 3D carbon materials can decrease phonon scattering and speed up lattice vibration and phonon transport, increasing the thermal conductivity.”
Self-citationHuang, X., Du, Z. H., Guo, J., et al. (2025) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2025.108776 · Cited by 11
Chen, L., Li, Y., Fei, H., Tong, J., & Dai, X. (2025) · Solar Energy · doi:10.1016/j.solener.2025.113680 · Cited by 14
Firoozi, A. A., Firoozi, A. A., & Saidani, T. (2025) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2025.106874 · Cited by 10
Study of thermal performance and melting behaviour of a novel paraffin wax-carbon quantum Dots PCMs
Murali, G., Janumala, E., Reddi, B. V., Vali, P. S. N. M., Elumalai, P. V., Murugan, M., Alwetaishi, M., Ramu, T., & Prabhakar, S. (2025) · Scientific Reports · doi:10.1038/s41598-025-08312-8 · Cited by 11
A review of MOF-based composite phase change materials for battery thermal management
Zhao, X., Fang, M., Liu, Y., Fei, H., & Guo, W. (2025) · Chemical Communications · doi:10.1039/d5cc04811g · Cited by 10
Li, C., Liao, J., Xie, B., Cao, P., & Long, Y. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.108328 · Cited by 12
Nguyen, G. T., Bui, T. H., Hiếu, N. H., Tuyen, N. T. C., Dang, N. B., Phung, L. T. K., & Huyen, D. K. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.113634 · Cited by 11
Baikousi, M., Gioti, C., Vasilopoulos, K. C., Drymiskianaki, A., Papadakis, V. M., Viskadourakis, Z., Ntaflos, A., Moschovas, D., Paipetis, A. S., Kenanakis, G., et al. (2024) · Molecules · doi:10.3390/molecules29184363 · Cited by 10
“Carbonaceous composites, which are also conductive materials, act as effective shape-stabilized materials for PCMs (SS-PCMs) leading to effective thermal storage and parallel EMI shielding systems [5–7].”
InfluentialPlastic photothermal composite phase change materials for intelligent greenhouse thermoregulation
Hao, Y., Liu, L., Meng, F., Li, Z., Zhang, S., Zhang, Y., & Tang, B. (2025) · Chemical Engineering Science · doi:10.1016/j.ces.2025.121779 · Cited by 12
Qi, S., Niu, Z., & Yuan, W. (2023) · ACS Applied Nano Materials · doi:10.1021/acsanm.3c04450 · Cited by 12
Zhang, J., Cao, X., Jiao, R., Luo, W., Ma, Y., Chen, Y., Li, J., Sun, H., & Li, A. (2023) · Langmuir · doi:10.1021/acs.langmuir.3c03009 · Cited by 10
Confined Crystallization Polyether-Based Flexible Phase Change Film for Thermal Management
Lu, X., Huang, H., Zhang, Y., Wang, Z., Peng, C., Zhang, S., Lu, R., Wang, Y., & Tang, B. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.4c06920 · Cited by 11
Wu, S., Zhang, X., Sang, H., Tang, K., Tang, Y., Chen, L., & Li, T. (2025) · Small · doi:10.1002/smll.202507948 · Cited by 17
Song, L., Yang, Y., Hu, H., Wang, Y., Jia, X., Sun, L., Xu, F., Li, B., Yu, T., Zhang, H., et al. (2023) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-023-12662-8 · Cited by 10
“Carbon-based porous materials (expanded graphite (EG) [2, 21, 22], carbon nanotubes [23], graphene [24], carbonized melamine [25], etc.) are suitable carriers for PCMs due to their natural porous structure [26].”
Ponnusamy, P., Seenivasan, S., Ravivarman, G., Sathiyasekar, K., & Girimurugan, R. (2024) · Advances in chemical and materials engineering book series · doi:10.4018/979-8-3693-2798-2.ch008 · Cited by 9
Investigation on melting process characteristics of phase change materials reinforced by copper foam
Li, Q., Wang, Y.-H., Cheng, Z., & Hu, P. (2024) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2024.126159 · Cited by 10
Song, B., Zhang, L., Zhang, B., Wan, X., Liu, Q., Li, H., Lei, S., Dang, H., Ren, X., & Li, H. (2025) · Nano Research · doi:10.26599/nr.2025.94907263 · Cited by 10
Phase Change Materials in Electrothermal Conversion Systems: A Review
Twaróg, R., Szatkowski, P., & Pielichowska, K. (2025) · Energies · doi:10.3390/en18030569 · Cited by 10
Metadata
- Authors
- Chen, X., Cheng, P., Tang, Z., Xu, X., Gao, H., & Wang, G.
- Affiliations
- Beijing Normal University (CN)
- University of Science and Technology Beijing (CN)
- Corresponding author
- Chen, Xiao
- Wang, Ge
- Venue
- Advanced Science
- Publisher
- Wiley
- Published
- 2021-03-03
- Volume
- 8
- Issue
- 9
- Pages
- 2001274-2001274
- ISSN
- 2198-3844 (ISSN-L)
- PMC
- PMC8097397
- OpenAlex
- W3135398377
- Cited by
- 483
- References
- 217
- Citations by year
- 2026: 69 · 2025: 121 · 2024: 111 · 2023: 97 · 2022: 62 · 2021: 23
- FWCI
- 6.20
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Advanced Science (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Fundamental Research Funds for the Central Universities (2019NTST29)
- National Natural Science Foundation of China (51902025)
- China Postdoctoral Science Foundation (2020T130060, 2019M660520)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Phase Change Materials Research
- Physical Sciences › Engineering › Mechanical Engineering › Adsorption and Cooling Systems
- Physical Sciences › Materials Science › Materials Chemistry › Thermal properties of materials
- Keywords
- phase change materials, carbon composite, thermal energy storage, thermal transfer, thermal energy conversion, thermal conductivity enhancement, shape-stabilized phase change materials, metal-organic framework derived carbon, solar thermal conversion, multifunctional materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.