The DOI matches its Crossref record; 126 of the 126 references it cites were found in a registry or an index.
Recent Progress on Wear‐Resistant Materials: Designs, Properties, and Applications
Open accessAbstract
There has been tremendous interest in the development of different innovative wear‐resistant materials, which can help to reduce energy losses resulted from friction and wear by ≈40% over the next 10–15 years. This paper provides a comprehensive review of the recent progress on designs, properties, and applications of wear‐resistant materials, starting with an introduction of various advanced technologies for the fabrication of wear‐resistant materials and anti‐wear structures with their wear mechanisms. Typical strategies of surface engineering and matrix strengthening for the development of wear‐resistant materials are then analyzed, focusing on the development of coatings, surface texturing, surface hardening, architecture, and the exploration of matrix compositions, microstructures, and reinforcements. Afterward, the relationship between the wear resistance of a material and its intrinsic properties including hardness, stiffness, strength, and cyclic plasticity is discussed with underlying mechanisms, such as the lattice distortion effect, bonding strength effect, grain size effect, precipitation effect, grain boundary effect, dislocation or twinning effect. A wide range of fundamental applications, specifically in aerospace components, automobile parts, wind turbines, micro‐/nano‐electromechanical systems, atomic force microscopes, and biomedical devices are highlighted. This review is concluded with prospects on challenges and future directions in this critical field.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Contact and Rubbing of Flat Surfaces
Archard, J. F. (1953) · Journal of Applied Physics · doi:10.1063/1.1721448 · Cited by 7,892
Microstructures and properties of high-entropy alloys
Zhang, Y., Zuo, T. T., Tang, Z., Gao, M. C., Dahmen, K. A., Liaw, P. K., & Lu, Z. P. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2013.10.001 · Cited by 7,128
Robertson, J. (2002) · Materials Science and Engineering: R: Reports · doi:10.1016/s0927-796x(02)00005-0 · Cited by 6,206
Leyland, A., & Matthews, A. (2000) · Wear · doi:10.1016/s0043-1648(00)00488-9 · Cited by 3,103
3D printing of high-strength aluminium alloys
Martin, J. H., Yahata, B. D., Hundley, J. M., Mayer, J. A., Schaedler, T. A., & Pollock, T. M. (2017) · Nature · doi:10.1038/nature23894 · Cited by 2,950
Additively manufactured hierarchical stainless steels with high strength and ductility
Wang, Y. M., Voisin, T., McKeown, J. T., Ye, J., Calta, N. P., Li, Z., Zeng, Z., Zhang, Y., Chen, W., Roehling, T. T., et al. (2018) · Nature Materials · doi:10.1038/nmat5021 · Cited by 2,613
Chen, Q., & Thouas, G. A. (2015) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2014.10.001 · Cited by 2,398
Influence of tribology on global energy consumption, costs and emissions
Holmberg, K., & Erdemir, A. (2017) · Friction · doi:10.1007/s40544-017-0183-5 · Cited by 2,190
Resin composite—State of the art
Ferracane, J. L. (2011) · Dental Materials · doi:10.1016/j.dental.2010.10.020 · Cited by 2,188
Global energy consumption due to friction in passenger cars
Holmberg, K., Andersson, P., & Erdemir, A. (2012) · Tribology International · doi:10.1016/j.triboint.2011.11.022 · Cited by 1,614
Metadata
- Authors
- Zhai, W., Bai, L., Zhou, R., Fan, X., Kang, G., Liu, Y., & Zhou, K.
- Venue
- Advanced Science
- Publisher
- Wiley
- Published
- 2021-03-24
- Volume
- 8
- Issue
- 11
- Pages
- e2003739-e2003739
- ISSN
- 2198-3844 (ISSN-L)
- OpenAlex
- W3136728280
- Cited by
- 651
- References
- 126
- FWCI
- 22.71
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Recent Progress on Wear‐Resistant Materials: Designs, Properties, and Applications. https://app.cochat.ai/papers/10.1002/advs.202003739
- The paper
- Zhai, W., Bai, L., Zhou, R., Fan, X., Kang, G., Liu, Y., & Zhou, K. (2021). Recent Progress on Wear‐Resistant Materials: Designs, Properties, and Applications. Advanced Science. https://doi.org/10.1002/advs.202003739
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.