Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 41 of the 42 references it cites were found in a registry or an index; 4 of the 13 sources its claims cite were checked for support.

Highly Active and Stable Alkaline Hydrogen Evolution Electrocatalyst Based on Ir‐Incorporated Partially Oxidized Ru Aerogel under Industrial‐Level Current Density

Open access

Abstract

AbstractThe realization of large‐scale industrial application of alkaline water electrolysis for hydrogen generation is severely hampered by the cost of electricity. Therefore, it is currently necessary to synthesize highly efficient electrocatalysts with excellent stability and low overpotential under an industrial‐level current density. Herein, Ir‐incorporated in partially oxidized Ru aerogel has been designed and synthesized via a simple in situ reduction strategy and subsequent oxidation process. The electrochemical measurements demonstrate that the optimized Ru98Ir2‐350 electrocatalyst exhibits outstanding hydrogen evolution reaction (HER) performance in an alkaline environment (1 M KOH). Especially, at the large current density of 1000 mA cm−2, the overpotential is as low as 121 mV, far exceeding the benchmark Pt/C catalyst. Moreover, the Ru98Ir2‐350 catalyst also displays excellent stability over 1500 h at 1000 mA cm−2, denoting its industrial applicability. This work provides an efficient route for developing highly active and ultra‐stable electrocatalysts for hydrogen generation under industrial‐level current density.

Overview

CoChat Summary

TL;DR

Ir-incorporated partially oxidized Ru aerogel (Ru98Ir2-350) is reported as an alkaline HER electrocatalyst that reaches industrial-level current density with low overpotential and long-term stability. It requires 121 mV overpotential at 1000 mA cm−2 in 1 M KOH and operates for over 1500 h at that current density.

Key findings

  • Ru98Ir2-350 requires overpotentials of 26, 94, and 121 mV at 10, 500, and 1000 mA cm−2, respectively, lower than Ru98Ir2 (35, 250, and 369 mV) and commercial Pt/C (29, 205, and 349 mV).
  • It shows a Tafel slope of 8.3 mV dec−1, better than Pt/C (15.6 mV dec−1) and other prepared samples (9.8–31.8 mV dec−1), and a mass activity of 560.7 A g−1 at 100 mV overpotential, 4.7 times Ru98Ir2 (119.4 A g−1) and 15.2 times Pt/C (36.8 A g−1).
  • Stability: after 10,000 CV cycles activity decreases only slightly; in i-t testing at 1000 mA cm−2, current density decreases only slightly over 1500 h, outperforming Pt/C and Ru100-350.
  • Faraday efficiency for H2 production is ≈100% within 90 min at 50 mA cm−2; ECSA is 954 cm2 and Cdl is 194.7 mF cm−2.

Methods

  • RuIr aerogels with Ru:Ir ratios of 100:0, 99:1, 98:2, 95:5, and 90:10 were synthesized by one-step in situ NaBH4 reduction, then oxidized at 350 °C to form partially oxidized aerogels; Ru98Ir2-350 was the optimized sample.
  • Characterization used XRD, FE-SEM, XPS, HRTEM/EDX, HAADF-STEM, and Raman spectroscopy.
  • HER performance was measured in 1 M KOH using a three-electrode cell with carbon paper working electrode, Hg/HgO reference, and graphite counter electrode; LSV was at 1 mV s−1 with 100% iR compensation, stability by CV at 100 mV s−1 and i-t at 1000 mA cm−2, plus EIS, Cdl/ECSA, and water-displacement Faraday efficiency measurements.

Limitations

  • The paper does not include an explicit limitations section.
  • Evident from the text: owing to the extremely low Ir content, no identified structural information of Ir species (Ir or IrO2) was found by HRTEM/FFT; Ir incorporation is inferred mainly from EDX, XPS, and Raman.
  • Evident from the text: the long-term stability test is reported at 1000 mA cm−2 in 1 M KOH under constant applied potential, and Pt/C comparison used a different mass loading (5 mg cm−2) than the Ru-based catalyst (1 mg cm−2).

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.1002/advs.202307061

Cites

41 of 41 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Figures

Figure 1 a) Schematic illustration of the synthesis procedure of Ru98Ir2‐350. b) FE‐SEM micrograph, c) TEM micrograph, d) FFT, e–i) HRTEM micrographs, j–m) HAADF‐STEM micrograph and corresponding EDX elemental mappings (at the Ru, O, and Ir edges) of Ru98Ir2‐350.
Figure 1 a) Schematic illustration of the synthesis procedure of Ru98Ir2‐350. b) FE‐SEM micrograph, c) TEM micrograph, d) FFT, e–i) HRTEM micrographs, j–m) HAADF‐STEM micrograph and corresponding EDX elemental mappings (at the Ru, O, and Ir edges) of Ru98Ir2‐350.CC BY · PubMed Central
Figure 2 a) EDX spectrum of Ru98Ir2‐350. b) XRD profiles of Ru98Ir2 and Ru98Ir2‐350. c,d) Ru 3p and Ir 4f core XPS spectra of Ru98Ir2 and Ru98Ir2‐350.
Figure 2 a) EDX spectrum of Ru98Ir2‐350. b) XRD profiles of Ru98Ir2 and Ru98Ir2‐350. c,d) Ru 3p and Ir 4f core XPS spectra of Ru98Ir2 and Ru98Ir2‐350.CC BY · PubMed Central
Figure 3 a) LSV curves of the as‐synthesized Ru98Ir2‐350, Ru98Ir2 samples, and commercial Pt/C catalyst. b) The overpotential comparison at the current density of 10, 500, and 1000 mA cm−2. c) LSV curves of the Ru100‐350, Ru99Ir1‐350, Ru98Ir2‐350, Ru95Ir5‐350, and Ru90Ir10‐350 samples. d) Tafel plots of the as‐synthesized Ru98Ir2‐350, Ru98Ir2 samples, and commercial Pt/C catalyst. e) Comparison of overpotential at 1000 mA cm−2 and Tafel slope value of the Ru98Ir2‐350 product with other highly active HER electrocatalysts. f) Mass activity value at an overpotential of 100 mV. g) The comparison of theoretically calculated and experimentally measured H2 evolution of Ru98Ir2‐350. h) Photos of recording changes in liquid level scale in Faraday testing.
Figure 3 a) LSV curves of the as‐synthesized Ru98Ir2‐350, Ru98Ir2 samples, and commercial Pt/C catalyst. b) The overpotential comparison at the current density of 10, 500, and 1000 mA cm−2. c) LSV curves of the Ru100‐350, Ru99Ir1‐350, Ru98Ir2‐350, Ru95Ir5‐350, and Ru90Ir10‐350 samples. d) Tafel plots of the as‐synthesized Ru98Ir2‐350, Ru98Ir2 samples, and commercial Pt/C catalyst. e) Comparison of overpotential at 1000 mA cm−2 and Tafel slope value of the Ru98Ir2‐350 product with other highly active HER electrocatalysts. f) Mass activity value at an overpotential of 100 mV. g) The comparison of theoretically calculated and experimentally measured H2 evolution of Ru98Ir2‐350. h) Photos of recording changes in liquid level scale in Faraday testing.CC BY · PubMed Central
Figure 4 a) LSV curves of the Ru98Ir2‐200, Ru98Ir2‐350, and Ru98Ir2‐500 samples. b) Comparison of the overpotential at the current density of 10, 100, and 500 mA cm−2. c) Tafel plots of the Ru98Ir2‐200, Ru98Ir2‐350, and Ru98Ir2‐500 samples. d) LSV curves of Ru98Ir2‐350 before and after 10 000 CV cycles. e) i‐t continuous durability of Ru98Ir2‐350, Ru100, and commercial Pt/C at 1000 mA cm‐2. f) Comparison of the current density and time of the Ru98Ir2‐350 sample with literature reported HER electrocatalysts.
Figure 4 a) LSV curves of the Ru98Ir2‐200, Ru98Ir2‐350, and Ru98Ir2‐500 samples. b) Comparison of the overpotential at the current density of 10, 100, and 500 mA cm−2. c) Tafel plots of the Ru98Ir2‐200, Ru98Ir2‐350, and Ru98Ir2‐500 samples. d) LSV curves of Ru98Ir2‐350 before and after 10 000 CV cycles. e) i‐t continuous durability of Ru98Ir2‐350, Ru100, and commercial Pt/C at 1000 mA cm‐2. f) Comparison of the current density and time of the Ru98Ir2‐350 sample with literature reported HER electrocatalysts.CC BY · PubMed Central
Figure 5 a) XRD patterns, b) Ir 4f XPS spectra, c) Ru 3p XPS spectra of Ru98Ir2‐350 before and after HER stability test in 1 M KOH. d) Ru 3p XPS spectra of the Ru100‐350 sample before and after HER durability measurement.
Figure 5 a) XRD patterns, b) Ir 4f XPS spectra, c) Ru 3p XPS spectra of Ru98Ir2‐350 before and after HER stability test in 1 M KOH. d) Ru 3p XPS spectra of the Ru100‐350 sample before and after HER durability measurement.CC BY · PubMed Central

Verification

Claims the paper makes

3 Valid · 1 Not valid · 4 Not checked · 35 Own results and interpretations

23 more claims

Create a free account to see all 43 claims and every source verdict.

See all claims — free account
  • Probably not a substantial claim. 9
  • It may state two separate claims as one. 7

Create a free account to see these claims.

Citations

Cites

Show all 42 references

Cited by

See all 30

Metadata

Authors
Yan, S., Chen, X., Li, W., Zhong, M., Xu, J., Xu, M., Wang, C., Pinna, N., & Lu, X.
Affiliations
  • Alan G. MacDiarmid Institute, College of Chemistry Jilin University Changchun 130012 P. R. China
  • Jilin University (CN)
  • Humboldt-Universität zu Berlin (DE)
Corresponding author
Lu, Xiaofeng
Venue
Advanced Science
Publisher
Wiley
Published
2023-12-10
Volume
11
Issue
7
Pages
e2307061-e2307061
ISSN
2198-3844 (ISSN-L)
OpenAlex
W4389526771
Cited by
30
References
42
Citations by year
2026: 10 · 2025: 10 · 2024: 9 · 2023: 1
FWCI
1.43
Type
journal article
Language
en
Open access
Locations
  • Advanced Science (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Funders
National Natural Science Foundation of China (52273055)
Topics
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › CO2 Reduction Techniques and Catalysts
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
Keywords
hydrogen evolution reaction, alkaline water electrolysis, electrocatalyst stability, high current density, in situ reduction, overpotential, hydrogen production

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

The claim verdicts this report counts are experimental: their accuracy is not yet measured.

A language model drew the claims from the paper on 2026-10-11, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-11 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Highly Active and Stable Alkaline Hydrogen Evolution Electrocatalyst Based on Ir‐Incorporated Partially Oxidized Ru Aerogel under Industrial‐Level Current Density. https://app.cochat.ai/papers/10.1002/advs.202307061
The paper
Yan, S., Chen, X., Li, W., Zhong, M., Xu, J., Xu, M., Wang, C., Pinna, N., & Lu, X. (2024). Highly Active and Stable Alkaline Hydrogen Evolution Electrocatalyst Based on Ir‐Incorporated Partially Oxidized Ru Aerogel under Industrial‐Level Current Density. Advanced Science. https://doi.org/10.1002/advs.202307061

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.