The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Spinel‐Layered Core‐Shell Cathode Materials for Li‐Ion Batteries
Abstract
In an attempt to overcome the problems associated with LiNiO 2, the solid solution series of lithium nickel‐metal oxides, Li[Ni 1–x M x]O 2 (with M = Co, Mn, Al, Ti, Mg, etc.), have been investigated as favorable cathode materials for high‐energy and high‐power lithium‐ion batteries. However, along with the improvement in the electrochemical properties in Ni‐based cathode materials, the thermal stability has been a great concern, and thus violent reaction of the cathode with the electrolyte needs to be avoided. Here, we report a heterostructured Li[Ni 0.54 Co 0.12 Mn 0.34]O 2 cathode material which possesses both high energy and safety. The core of the particle is Li[Ni 0.54 Co 0.12 Mn 0.34]O 2 with a layered phase (R3‐m) and the shell, with a thickness of < 0.5 μm, is a highly stable Li 1+x[CoNi x Mn 2–x]2 O 4 spinel phase (Fd‐3m). The material demonstrates reversible capacity of 200 mAhg‐1 and retains 95% capacity retention under the most severe test condition of 60 °C. In addition, the amount of oxygen evolution from the lattice in the cathode with two heterostructures is reduced by 70%, compared to the reference sample. All these results suggest that the bulk Li[Ni 0.54 Co 0.12 Mn 0.34]O 2 consisting of two heterostructures satisfy the requirements for hybrid electric vehicles, power tools, and mobile electronics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Shannon, R. D. (1976) · Acta Crystallographica Section A · doi:10.1107/s0567739476001551 · Cited by 66,145
Cited by
Promise and reality of post-lithium-ion batteries with high energy densities
Choi, J. W., & Aurbach, D. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.13 · Cited by 5,110
Challenges Facing Lithium Batteries and Electrical Double‐Layer Capacitors
Choi, N., Chen, Z., Freunberger, S. A., Ji, X., Sun, Y., Amine, K., Yushin, G., Nazar, L. F., Cho, J., & Bruce, P. G. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201201429 · Cited by 2,700
Self-citationChatenet, M., Pollet, B. G., Dekel, D. R., Dionigi, F., Deseure, J., Millet, P., Braatz, R. D., Bazant, M. Z., Eikerling, M., Staffell, I., et al. (2022) · Chemical Society Reviews · doi:10.1039/d0cs01079k · Cited by 2,025
Nickel‐Rich Layered Lithium Transition‐Metal Oxide for High‐Energy Lithium‐Ion Batteries
Liu, W., Oh, P., Liu, X., Lee, M., Cho, W., Chae, S., Kim, Y., & Cho, J. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201409262 · Cited by 1,960
Self-citationSpinels: Controlled Preparation, Oxygen Reduction/Evolution Reaction Application, and Beyond
Zhao, Q., Yan, Z., Chen, C., & Chen, J. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00051 · Cited by 1,712
Metadata
- Authors
- Cho, Y., Lee, S., Lee, Y., Hong, T., & Cho, J.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2011-07-19
- Volume
- 1
- Issue
- 5
- Pages
- 821-828
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2157194577
- Cited by
- 204
- References
- 1
- FWCI
- 7.13
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.