The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Spinel‐Layered Core‐Shell Cathode Materials for Li‐Ion Batteries
Abstract
In an attempt to overcome the problems associated with LiNiO 2, the solid solution series of lithium nickel‐metal oxides, Li[Ni 1–x M x]O 2 (with M = Co, Mn, Al, Ti, Mg, etc.), have been investigated as favorable cathode materials for high‐energy and high‐power lithium‐ion batteries. However, along with the improvement in the electrochemical properties in Ni‐based cathode materials, the thermal stability has been a great concern, and thus violent reaction of the cathode with the electrolyte needs to be avoided. Here, we report a heterostructured Li[Ni 0.54 Co 0.12 Mn 0.34]O 2 cathode material which possesses both high energy and safety. The core of the particle is Li[Ni 0.54 Co 0.12 Mn 0.34]O 2 with a layered phase (R3‐m) and the shell, with a thickness of < 0.5 μm, is a highly stable Li 1+x[CoNi x Mn 2–x]2 O 4 spinel phase (Fd‐3m). The material demonstrates reversible capacity of 200 mAhg‐1 and retains 95% capacity retention under the most severe test condition of 60 °C. In addition, the amount of oxygen evolution from the lattice in the cathode with two heterostructures is reduced by 70%, compared to the reference sample. All these results suggest that the bulk Li[Ni 0.54 Co 0.12 Mn 0.34]O 2 consisting of two heterostructures satisfy the requirements for hybrid electric vehicles, power tools, and mobile electronics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Shannon, R. D. (1976) · Acta Crystallographica Section A · doi:10.1107/s0567739476001551 · Cited by 66,145
Cited by
Promise and reality of post-lithium-ion batteries with high energy densities
Choi, J. W., & Aurbach, D. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.13 · Cited by 5,110
Challenges Facing Lithium Batteries and Electrical Double‐Layer Capacitors
Choi, N., Chen, Z., Freunberger, S. A., Ji, X., Sun, Y., Amine, K., Yushin, G., Nazar, L. F., Cho, J., & Bruce, P. G. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201201429 · Cited by 2,700
Self-citationChatenet, M., Pollet, B. G., Dekel, D. R., Dionigi, F., Deseure, J., Millet, P., Braatz, R. D., Bazant, M. Z., Eikerling, M., Staffell, I., et al. (2022) · Chemical Society Reviews · doi:10.1039/d0cs01079k · Cited by 2,025
Nickel‐Rich Layered Lithium Transition‐Metal Oxide for High‐Energy Lithium‐Ion Batteries
Liu, W., Oh, P., Liu, X., Lee, M., Cho, W., Chae, S., Kim, Y., & Cho, J. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201409262 · Cited by 1,960
Self-citationSpinels: Controlled Preparation, Oxygen Reduction/Evolution Reaction Application, and Beyond
Zhao, Q., Yan, Z., Chen, C., & Chen, J. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00051 · Cited by 1,712
Jung, R., Metzger, M., Maglia, F., Stinner, C., & Gasteiger, H. A. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0021707jes · Cited by 1,350
Voltage issue of aqueous rechargeable metal-ion batteries
Liu, Z., Huang, Y., Huang, Y., Yang, Q., Li, X., Huang, Z., & Zhi, C. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00131j · Cited by 783
Degradation Mechanisms and Mitigation Strategies of Nickel-Rich NMC-Based Lithium-Ion Batteries
Li, T., Yuan, X.-Z., Zhang, L., Song, D., Shi, K., & Bock, C. (2020) · Electrochemical Energy Reviews · doi:10.1007/s41918-019-00053-3 · Cited by 753
Radin, M. D., Hy, S., Sina, M., Fang, C., Liu, H., Vinckeviciute, J., Zhang, M., Whittingham, M. S., Meng, Y. S., & Van der Ven, A. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602888 · Cited by 677
A perspective on the high-voltage LiMn1.5Ni0.5O4 spinel cathode for lithium-ion batteries
Manthiram, A., Chemelewski, K., & Lee, E.-S. (2014) · Energy & Environmental Science · doi:10.1039/c3ee42981d · Cited by 625
Oxygen Release Degradation in Li‐Ion Battery Cathode Materials: Mechanisms and Mitigating Approaches
Sharifi‐Asl, S., Lu, J., Amine, K., & Shahbazian‐Yassar, R. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900551 · Cited by 532
Kim, H., Kim, M. G., Jeong, H. Y., Nam, H., & Cho, J. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b00045 · Cited by 526
Self-citationCho, Y., Oh, P., & Cho, J. (2013) · Nano Letters · doi:10.1021/nl304558t · Cited by 501
Self-citationBeyond Doping and Coating: Prospective Strategies for Stable High-Capacity Layered Ni-Rich Cathodes
Sun, H. H., Ryu, H.-H., Kim, U.-H., Weeks, J. A., Heller, A., Sun, Y.-K., & Mullins, C. B. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c00191 · Cited by 495
Lim, S. Y., Kim, H., Shakoor, R. A., Jung, Y., & Choi, J. W. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.015209jes · Cited by 379
Lithium Manganese Spinel Cathodes for Lithium‐Ion Batteries
Huang, Y., Dong, Y., Li, S., Lee, J., Wang, C., Zhu, Z., Xue, W., Li, Y., & Li, J. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202000997 · Cited by 374
Effect of Ni2+ Content on Lithium/Nickel Disorder for Ni-Rich Cathode Materials
Wu, F., Tian, J., Su, Y., Wang, J., Zhang, C., Bao, L., He, T., Li, J., & Chen, S. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b00645 · Cited by 369
Lee, M.-J., Lee, S., Oh, P., Kim, Y., & Cho, J. (2014) · Nano Letters · doi:10.1021/nl404430e · Cited by 291
Self-citationHou, P., Yin, J., Ding, M., Huang, J., & Xu, X. (2017) · Small · doi:10.1002/smll.201701802 · Cited by 289
Kim, J., Ma, H., Cha, H., Lee, H., Sung, J., Seo, M., Oh, P., Park, M., & Cho, J. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00155c · Cited by 273
Self-citation
Metadata
- Authors
- Cho, Y., Lee, S., Lee, Y., Hong, T., & Cho, J.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2011-07-19
- Volume
- 1
- Issue
- 5
- Pages
- 821-828
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2157194577
- Cited by
- 204
- References
- 1
- FWCI
- 7.13
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.