The DOI matches its Crossref record.
Improved Functionality of Lithium‐Ion Batteries Enabled by Atomic Layer Deposition on the Porous Microstructure of Polymer Separators and Coating Electrodes
Abstract
Atomic layer deposition (ALD) of Al 2 O 3 is applied on a polypropylene separator for lithium‐ion batteries. A thin Al 2 O 3 layer (<10 nm) is coated on every surface of the porous polymer microframework without significantly increasing the total separator thickness. The thin Al 2 O 3 ALD coating results in significantly suppressed thermal shrinkage, which may lead to improved safety of the batteries. More importantly, the wettability of Al 2 O 3 ALD‐coated separators in an extremely polar electrolyte based on pure propylene carbonate (PC) solvent is demonstrated, without any decrease in electrochemical performances such as capacity, rate capability, and cycle life. Finally, a LiCoO 2/natural graphite full cell is demonstrated under extremely severe conditions (pure PC‐based electrolyte and high (4.5 V) upper cut‐off potential), which is enabled by the Al 2 O 3 ALD coating on all three components (cathode, anode, and separator).
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Reviving lithium cobalt oxide-based lithium secondary batteries-toward a higher energy density
Wang, L., Chen, B., Ma, J., Cui, G., & Chen, L. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00322j · Cited by 625
Park, K. H., Bai, Q., Kim, D. H., Oh, D. Y., Zhu, Y., Mo, Y., & Jung, Y. S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800035 · Cited by 589
Self-citationPorous membranes in secondary battery technologies
Lu, W., Yuan, Z., Zhao, Y., Zhang, H., Zhang, H., & Li, X. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00823b · Cited by 479
Improving battery safety by early detection of internal shorting with a bifunctional separator
Wu, H., Zhuo, D., Kong, D., & Cui, Y. (2014) · Nature Communications · doi:10.1038/ncomms6193 · Cited by 400
Nam, Y. J., Oh, D. Y., Jung, S. H., & Jung, Y. S. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.11.031 · Cited by 390
Self-citationFast and reversible thermoresponsive polymer switching materials for safer batteries
Chen, Z., Hsu, P.-C., Lopez, J., Li, Y., To, J. W. F., Liu, N., Wang, C., Andrews, S. C., Liu, J., Cui, Y., et al. (2016) · Nature Energy · doi:10.1038/nenergy.2015.9 · Cited by 360
A Thermally Conductive Separator for Stable Li Metal Anodes
Luo, W., Zhou, L., Fu, K., Yang, Z., Wan, J., Manno, M., Yao, Y., Zhu, H., Yang, B., & Hu, L. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b02432 · Cited by 356
Wang, X., & Yushin, G. (2015) · Energy & Environmental Science · doi:10.1039/c5ee01254f · Cited by 289
Liu, K., Zhuo, D., Lee, H., Liu, W., Lin, D., Lu, Y., & Cui, Y. (2017) · Advanced Materials · doi:10.1002/adma.201603987 · Cited by 288
Di Lecce, D., Verrelli, R., & Hassoun, J. (2017) · Green Chemistry · doi:10.1039/c7gc01328k · Cited by 287
Safer Lithium‐Ion Batteries from the Separator Aspect: Development and Future Perspectives
Liu, Z., Jiang, Y., Hu, Q., Guo, S., Yu, L., Li, Q., Liu, Q., & Hu, X. (2021) · ENERGY & ENVIRONMENTAL MATERIALS · doi:10.1002/eem2.12129 · Cited by 253
Metadata
- Authors
- Jung, Y. S., Cavanagh, A. S., Gedvilas, L., Widjonarko, N. E., Scott, I. D., Lee, S., Kim, G., George, S. M., & Dillon, A. C.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2012-04-27
- Volume
- 2
- Issue
- 8
- Pages
- 1022-1027
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2151315227
- Cited by
- 236
- References
- 0
- FWCI
- 10.38
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.