The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
Structural and Electrochemical Study of Al2O3 and TiO2 Coated Li1.2Ni0.13Mn0.54Co0.13O2 Cathode Material Using ALD
Abstract
Nanolayers of Al 2 O 3 and TiO 2 coatings were applied to lithium‐ and manganese‐rich cathode powder Li 1.2 Ni 0.13 Mn 0.54 Co 0.13 O 2 using an atomic layer deposition (ALD) method. The ALD coatings exhibited different surface morphologies; the Al 2 O 3 surface film appeared to be uniform and conformal, while the TiO 2 layers appeared as particulates across the material surface. In a Li‐cell, the Al 2 O 3 surface film was stable during repeated charge and discharge, and this improved the cell cycling stability, despite a high surface impedance. The TiO 2 layer was found to be more reactive with Li and formed a LixTiO 2 interface, which led to a slight increase in cell capacity. However, the repetitive insertion/extraction process for the Li+ ions caused erosion of the surface protective TiO 2 film, which led to degradation in cell performance, particularly at high temperature. For cells comprised of the coated Li 1.2 Ni 0.13 Mn 0.54 Co 0.13 O 2 and an anode of meso‐carbon‐micro‐beads (MCMB), the cycling stability introduced by ALD was not enough to overcome the electrochemical instability of MCMB graphite. Therefore, protection of the cathode materials by ALD Al 2 O 3 or TiO 2 can address some of the capacity fading issues related to the Li‐rich cathode at room temperature.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The Li-Ion Rechargeable Battery: A Perspective
Goodenough, J. B., & Park, K.-S. (2013) · Journal of the American Chemical Society · doi:10.1021/ja3091438 · Cited by 9,962
Atomic Layer Deposition: An Overview
George, S. M. (2010) · Chemical Reviews · doi:10.1021/cr900056b · Cited by 5,814
Li2MnO3-stabilized LiMO2 (M = Mn, Ni, Co) electrodes for lithium-ion batteries
Thackeray, M. M., Kang, S.-H., Johnson, C. S., Vaughey, J. T., Benedek, R., & Hackney, S. A. (2007) · Journal of Materials Chemistry · doi:10.1039/b702425h · Cited by 2,039
High-energy cathode material for long-life and safe lithium batteries
Sun, Y.-K., Myung, S.-T., Park, B.-C., Prakash, J., Belharouak, I., & Amine, K. (2009) · Nature Materials · doi:10.1038/nmat2418 · Cited by 1,519
Self-citationPerformance of layered Li(Ni1/3Co1/3Mn1/3)O2 as cathode for Li-ion batteries
Shaju, K. M., Subba Rao, G. V., & Chowdari, B. V. R. (2002) · Electrochimica Acta · doi:10.1016/s0013-4686(02)00593-5 · Cited by 988
Formation of the Spinel Phase in the Layered Composite Cathode Used in Li-Ion Batteries
Gu, M., Belharouak, I., Zheng, J., Wu, H., Xiao, J., Genc, A., Amine, K., Thevuthasan, S., Baer, D. R., Zhang, J.-G., et al. (2013) · ACS Nano · doi:10.1021/nn305065u · Cited by 918
Self-citationXu, B., Fell, C. R., Chi, M., & Meng, Y. S. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01131f · Cited by 825
The significance of the Li2MnO3 component in ‘composite’ xLi2MnO3·(1−x)LiMn0.5Ni0.5O2 electrodes
Johnson, C. S., Kim, J.-S., Lefief, C., Li, N., Vaughey, J. T., & Thackeray, M. M. (2004) · Electrochemistry Communications · doi:10.1016/j.elecom.2004.08.002 · Cited by 740
Design of electrolyte solutions for Li and Li-ion batteries: a review
Aurbach, D., Talyosef, Y., Markovsky, B., Markevich, E., Zinigrad, E., Asraf, L., Gnanaraj, J. S., & Kim, H.-J. (2004) · Electrochimica Acta · doi:10.1016/j.electacta.2004.01.090 · Cited by 682
Role of surface coating on cathode materials for lithium-ion batteries
Chen, Z., Qin, Y., Amine, K., & Sun, Y.-K. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm00154f · Cited by 672
Emerging Applications of Atomic Layer Deposition for Lithium‐Ion Battery Studies
Meng, X., Yang, X., & Sun, X. (2012) · Advanced Materials · doi:10.1002/adma.201200397 · Cited by 573
Elam, J. W., Groner, M. D., & George, S. M. (2002) · Review of Scientific Instruments · doi:10.1063/1.1490410 · Cited by 570
Self-citationJung, Y. S., Cavanagh, A. S., Riley, L. A., Kang, S., Dillon, A. C., Groner, M. D., George, S. M., & Lee, S. (2010) · Advanced Materials · doi:10.1002/adma.200903951 · Cited by 560
Li, X., Meng, X., Liu, J., Geng, D., Zhang, Y., Banis, M. N., Li, Y., Yang, J., Li, R., Sun, X., et al. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201101068 · Cited by 417
Ultrathin Coatings on Nano-LiCoO2for Li-Ion Vehicular Applications
Scott, I. D., Jung, Y. S., Cavanagh, A. S., Yan, Y., Dillon, A. C., George, S. M., & Lee, S.-H. (2011) · Nano Letters · doi:10.1021/nl1030198 · Cited by 379
Kang, S.-H., & Thackeray, M. M. (2009) · Electrochemistry Communications · doi:10.1016/j.elecom.2009.01.025 · Cited by 314
Liu, Y., Hudak, N. S., Huber, D. L., Limmer, S. J., Sullivan, J. P., & Huang, J. Y. (2011) · Nano Letters · doi:10.1021/nl202088h · Cited by 302
Titanium isopropoxide as a precursor in atomic layer epitaxy of titanium dioxide thin films
Ritala, M., Leskelä, M. A., Niinistö, L., & Haussalo, P. (1993) · Chemistry of Materials · doi:10.1021/cm00032a023 · Cited by 295
Appapillai, A. T., Mansour, A. N., Cho, J., & Shao‐Horn, Y. (2007) · Chemistry of Materials · doi:10.1021/cm0715390 · Cited by 295
Myung, S.-T., Amine, K., & Sun, Y.-K. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm00508h · Cited by 230
Unexpected Improved Performance of ALD Coated LiCoO2/Graphite Li‐Ion Batteries
Jung, Y. S., Lu, P., Cavanagh, A. S., Ban, C., Kim, G., Lee, S., George, S. M., Harris, S. J., & Dillon, A. C. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201200370 · Cited by 228
Riley, L. A., Van Atta, S., Cavanagh, A. S., Yan, Y., George, S. M., Liu, P., Dillon, A. C., & Lee, S.-H. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.11.124 · Cited by 223
Performance Degradation and Gassing of Li4Ti5O12/LiMn2O4Lithium-Ion Cells
Belharouak, I., Koenig, G. M., Tan, T., Yumoto, H., Ota, N., & Amine, K. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.013208jes · Cited by 201
Self-citationLong-Range and Local Structure in the Layered Oxide Li1.2Co0.4Mn0.4O2
Bareño, J., Balasubramanian, M., Kang, S. H., Wen, J. G., Lei, C. H., Pol, S. V., Petrov, I., & Abraham, D. P. (2011) · Chemistry of Materials · doi:10.1021/cm200250a · Cited by 190
Surface properties of LiCoO2, LiNiO2 and LiNi1−xCoxO2
Moses, A. W., Flores, H. G. G., Kim, J.-G., & Langell, M. A. (2007) · Applied Surface Science · doi:10.1016/j.apsusc.2006.10.044 · Cited by 185
Lim, J.-H., Bang, H., Lee, K.-S., Amine, K., & Sun, Y.-K. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.10.035 · Cited by 181
Guan, D., Jeevarajan, J. A., & Wang, Y. (2011) · Nanoscale · doi:10.1039/c0nr00939c · Cited by 180
Cheng, H.-M., Wang, F.-M., Chu, J. P., Santhanam, R., Rick, J., & Lo, S.-C. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp210551r · Cited by 163
Charge–discharge stability of graphite anodes for lithium-ion batteries
Wang, C., Appleby, A. J., & Little, F. E. (2001) · Journal of Electroanalytical Chemistry · doi:10.1016/s0022-0728(00)00447-2 · Cited by 152
Conformal Surface Coatings to Enable High Volume Expansion Li‐Ion Anode Materials
Riley, L. A., Cavanagh, A. S., George, S. M., Jung, Y. S., Yan, Y., Lee, S., & Dillon, A. C. (2010) · ChemPhysChem · doi:10.1002/cphc.201000158 · Cited by 141
Ito, A., Shoda, K., Sato, Y., Hatano, M., Horie, H., & Ohsawa, Y. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.12.079 · Cited by 133
Jung, Y. S., Cavanagh, A. S., Yan, Y., George, S. M., & Manthiram, A. (2011) · Journal of The Electrochemical Society · doi:10.1149/2.030112jes · Cited by 127
Snyder, M. Q., Trebukhova, S., Ravdel, B., Wheeler, M. C., DiCarlo, J., Tripp, C. P., & DeSisto, W. J. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.12.015 · Cited by 121
Araki, K., & Satô, N. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00593-7 · Cited by 75
Improved Mechanical Integrity of ALD-Coated Composite Electrodes for Li-Ion Batteries
Riley, L. A., Cavanagh, A. S., George, S. M., Lee, S.-H., & Dillon, A. C. (2010) · Electrochemical and Solid-State Letters · doi:10.1149/1.3529367 · Cited by 55
Surface roughness reduction in atomic layer epitaxy growth of titanium dioxide thin films
Ritala, M., Leskelä, M. A., Niinistö, L., PROHASKA, T. R., Friedbacher, G., & Grasserbauer, M. (1994) · Thin Solid Films · doi:10.1016/0040-6090(94)90754-4 · Cited by 50
Study of the formation of mesoporous titania via a template approach and of subsequent Li insertion
Leroux, F., Dewar, P. J., Intissar, M., Ouvrard, G., & Nazar, L. F. (2002) · Journal of Materials Chemistry · doi:10.1039/b204051d · Cited by 49
Wu, M.-S., Chiang, P.-C. J., & Lin, J.-C. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1896325 · Cited by 46
Cited by
Promise and reality of post-lithium-ion batteries with high energy densities
Choi, J. W., & Aurbach, D. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.13 · Cited by 5,110
Lin, F., Markus, I. M., Nordlund, D., Weng, T.-C., Asta, M. D., Xin, H. L., & Doeff, M. M. (2014) · Nature Communications · doi:10.1038/ncomms4529 · Cited by 1,481
High-voltage liquid electrolytes for Li batteries: progress and perspectives
Fan, X., & Wang, C. (2021) · Chemical Society Reviews · doi:10.1039/d1cs00450f · Cited by 980
Schipper, F., Erickson, E. M., Erk, C., Shin, J.-Y., Chesneau, F. F., & Aurbach, D. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0351701jes · Cited by 762
Surface and Interface Engineering of Electrode Materials for Lithium‐Ion Batteries
Wang, K., Li, X., & Chen, J. (2015) · Advanced Materials · doi:10.1002/adma.201402962 · Cited by 546
Metadata
- Authors
- Zhang, X., Belharouak, I., Li, L., Lei, Y., Elam, J. W., Nie, A., Chen, X., Yassar, R. S., & Axelbaum, R. L.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2013-06-12
- Volume
- 3
- Issue
- 10
- Pages
- 1299-1307
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2133112107
- Cited by
- 495
- References
- 38
- FWCI
- 18.57
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.