The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
Lithium Polyacrylate (LiPAA) as an Advanced Binder and a Passivating Agent for High‐Voltage Li‐Ion Batteries
Abstract
Intensive studies of an advanced energy material are reported and lithium polyacrylate (LiPAA) is proven to be a surprisingly unique, multifunctional binder for high‐voltage Li‐ion batteries. The absence of effective passivation at the interface of high‐voltage cathodes in Li‐ion batteries may negatively affect their electrochemical performance, due to detrimental phenomena such as electrolyte solution oxidation and dissolution of transition metal cations. A strategy is introduced to build a stable cathode–electrolyte solution interphase for LiNi 0.5 Mn 1.5 O 4 (LNMO) spinel high‐voltage cathodes during the electrode fabrication process by simply using LiPAA as the cathode binder. LiPAA is a superb binder due to unique adhesion, cohesion, and wetting properties. It forms a uniform thin passivating film on LNMO and conducting carbon particles in composite cathodes and also compensates Li‐ion loss in full Li‐ion batteries by acting as an extra Li source. It is shown that these positive roles of LiPAA lead to a significant improvement in the electrochemical performance (e.g., cycle life, cell impedance, and rate capability) of LNMO/graphite battery prototypes, compared with that obtained using traditional polyvinylidene fluoride (PVdF) binder for LNMO cathodes. In addition, replacing PVdF with LiPAA binder for LNMO cathodes offers better adhesion, lower cost, and clear environmental advantages.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ageing mechanisms in lithium-ion batteries
Vetter, J., Novák, P., Wagner, M. R., Veit, C., Möller, K.-C., Besenhard, J. O., Winter, M., Wohlfahrt-Mehrens, M., Vogler, C., & Hammouche, A. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.01.006 · Cited by 3,987
A review of the features and analyses of the solid electrolyte interphase in Li-ion batteries
Verma, P., Maire, P., & Novák, P. (2010) · Electrochimica Acta · doi:10.1016/j.electacta.2010.05.072 · Cited by 2,903
Higher, Stronger, Better…︁ A Review of 5 Volt Cathode Materials for Advanced Lithium‐Ion Batteries
Kraytsberg, A., & Ein‐Eli, Y. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200068 · Cited by 698
Pieczonka, N. P. W., Liu, Z., Lu, P., Olson, K. L., Moote, J., Powell, B. R., & Kim, J. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp405158m · Cited by 629
Self-citationThe role of Li-ion battery electrolyte reactivity in performance decline and self-discharge
Sloop, S. E., Kerr, J. B., & Kinoshita, K. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00149-6 · Cited by 517
Yang, L., Ravdel, B., & Lucht, B. L. (2010) · Electrochemical and Solid-State Letters · doi:10.1149/1.3428515 · Cited by 508
Aurbach, D., Markovsky, B., Levi, M. D., Levi, E., Schechter, A., Moshkovich, M., & Cohen, Y. (1999) · Journal of Power Sources · doi:10.1016/s0378-7753(99)00187-1 · Cited by 501
Self-citationLiu, J., & Manthiram, A. (2009) · Chemistry of Materials · doi:10.1021/cm9000043 · Cited by 363
Self-citationSurface modification of LiNi0.5Mn1.5O4 by ZrP2O7 and ZrO2 for lithium-ion batteries
Wu, H. M., Belharouak, I., Abouimrane, A., Sun, Y.-K., & Amine, K. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.11.029 · Cited by 251
Challenges and Approaches for High‐Voltage Spinel Lithium‐Ion Batteries
Kim, J., Pieczonka, N. P. W., & Yang, L. (2014) · ChemPhysChem · doi:10.1002/cphc.201400052 · Cited by 244
Self-citation
Cited by
Guidelines and trends for next-generation rechargeable lithium and lithium-ion batteries
Wu, F., Maier, J., & Yu, Y. (2020) · Chemical Society Reviews · doi:10.1039/c7cs00863e · Cited by 2,229
Lithium-ion battery fast charging: A review
Tomaszewska, A., Chu, Z., Feng, X., O'Kane, S., Liu, X., Chen, J., Ji, C., Endler, E., Li, R., Liu, L., et al. (2019) · eTransportation · doi:10.1016/j.etran.2019.100011 · Cited by 1,592
High-voltage positive electrode materials for lithium-ion batteries
Li, W., Song, B., & Manthiram, A. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00875e · Cited by 1,339
Self-citationLi, J., Fleetwood, J., Hawley, W. B., & Kays, W. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00565 · Cited by 895
A Flexible Solid Electrolyte Interphase Layer for Long‐Life Lithium Metal Anodes
Li, N., Shi, Y., Yin, Y., Zeng, X., Li, J., Li, C., Wan, L., Wen, R., & Guo, Y. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201710806 · Cited by 721
Metadata
- Authors
- Pieczonka, N. P. W., Borgel, V., Ziv, B., Leifer, N., Dargel, V., Aurbach, D., Kim, J., Liu, Z., Huang, X., Krachkovskiy, S. A., Goward, G. R., Halalay, I., Powell, B. R., & Manthiram, A.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2015-09-22
- Volume
- 5
- Issue
- 23
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W1939181633
- Cited by
- 262
- References
- 30
- FWCI
- 6.90
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Lithium Polyacrylate (LiPAA) as an Advanced Binder and a Passivating Agent for High‐Voltage Li‐Ion Batteries. https://app.cochat.ai/papers/10.1002/aenm.201501008
- The paper
- Pieczonka, N. P. W., Borgel, V., Ziv, B., Leifer, N., Dargel, V., Aurbach, D., Kim, J., Liu, Z., Huang, X., Krachkovskiy, S. A., Goward, G. R., Halalay, I., Powell, B. R., & Manthiram, A. (2015). Lithium Polyacrylate (LiPAA) as an Advanced Binder and a Passivating Agent for High‐Voltage Li‐Ion Batteries. Advanced Energy Materials. https://doi.org/10.1002/aenm.201501008
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.