The DOI matches its Crossref record; 212 of the 212 references it cites were found in a registry or an index.
Metal‐Organic Frameworks for Carbon Dioxide Capture and Methane Storage
Abstract
In the global transition to a sustainable low‐carbon economy, CO 2 capture and storage technology still plays a critical role for deep emission reduction, particularly for the stationary sources in power generation and industry. However, for small and mobile emission sources in transportation, CO 2 capture is not suitable and it is more practical to use relatively clean energy, such as natural gas. In these two low‐carbon energy technologies, designing highly selective sorbents is one of the key and most challenging steps. Toward this end, metal‐organic frameworks (MOFs) have received continuously intensive attention in the past decades for their highly porous and diversified structures. In this review, the recent progress in developing MOFs for selective CO 2 capture from post‐combustion flue gas and CH 4 storage for vehicle applications are summarized. For CO 2 capture, several promising strategies being used to improve CO 2 adsorption uptake at low pressures are highlighted and compared. In addition, the conventional and novel regeneration techniques for MOFs are also discussed. In the case of CH 4 storage, the flexible and rigid MOFs, whose CH 4 storage capacity is close to the target set by U.S. Department of Energy are particularly emphasized. Finally, the challenge of using MOFs for CH 4 storage is discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Design and synthesis of an exceptionally stable and highly porous metal-organic framework
Li, H., Eddaoudi, M., O'Keeffe, M., & Yaghi, O. M. (1999) · Nature · doi:10.1038/46248 · Cited by 8,554
Eddaoudi, M., Kim, J., Rosi, N., Vodak, D., Wachter, J., O'Keeffe, M., & Yaghi, O. M. (2002) · Science · doi:10.1126/science.1067208 · Cited by 8,132
Carbon Dioxide Capture in Metal–Organic Frameworks
Sumida, K., Rogow, D. L., Mason, J. A., McDonald, T. M., Bloch, E. D., Herm, Z. R., Bae, T.-H., & Long, J. R. (2012) · Chemical Reviews · doi:10.1021/cr2003272 · Cited by 6,408
A Chemically Functionalizable Nanoporous Material [Cu 3 (TMA) 2 (H 2 O) 3 ] n
Chui, S. S.-Y., Lo, S. M.-F., Charmant, J. P. H., Orpen, A. G., & Williams, I. D. (1999) · Science · doi:10.1126/science.283.5405.1148 · Cited by 6,063
Hybrid porous solids: past, present, future
Férey, G. (2008) · Chem. Soc. Rev. · doi:10.1039/b618320b · Cited by 5,822
Amine Scrubbing for CO 2 Capture
Rochelle, G. T. (2009) · Science · doi:10.1126/science.1176731 · Cited by 4,440
Ultrahigh Porosity in Metal-Organic Frameworks
Furukawa, H., Ko, N., Go, Y. B., Aratani, N., Choi, S. B., Choi, E., Yazaydin, A. Ö., Snurr, R. Q., O’Keeffe, M., Kim, J., et al. (2010) · Science · doi:10.1126/science.1192160 · Cited by 3,904
Thermodynamics of mixed‐gas adsorption
Myers, A. L., & Prausnitz, J. M. (1965) · AIChE Journal · doi:10.1002/aic.690110125 · Cited by 3,775
On the Structure of a Catalyst Surface
Sips, R. (1948) · The Journal of Chemical Physics · doi:10.1063/1.1746922 · Cited by 3,650
Metal–organic frameworks: a new class of porous materials
Rowsell, J. L. C., & Yaghi, O. M. (2004) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2004.03.034 · Cited by 2,963
Cited by
Gür, T. M. (2022) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2021.100965 · Cited by 821
Applications of Metal–Organic‐Framework‐Derived Carbon Materials
Yang, W., Li, X., Li, Y., Zhu, R., & Pang, H. (2019) · Advanced Materials · doi:10.1002/adma.201804740 · Cited by 539
Younas, M., Rezakazemi, M., Daud, M., Wazir, M. B., Ahmad, S., Ullah, N., Inamuddin, & Ramakrishna, S. (2020) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2020.100849 · Cited by 421
Bedia, J., Muelas-Ramos, V., Peñas-Garzón, M., Gómez-Avilés, A., Rodríguez, J., & Belver, C. (2019) · Catalysts · doi:10.3390/catal9010052 · Cited by 371
The Chemistry of Reticular Framework Nanoparticles: MOF, ZIF, and COF Materials
Ploetz, E., Engelke, H., Lächelt, U., & Wuttke, S. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909062 · Cited by 350
Wang, Y., Peh, S. B., & Zhao, D. (2019) · Small · doi:10.1002/smll.201900058 · Cited by 342
Hwang, J., Ejsmont, A., Freund, R., Goscianska, J., Schmidt, B. V. K. J., & Wuttke, S. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00871c · Cited by 333
Metal–organic frameworks (MOFs) for photocatalytic CO2 reduction
Chen, Y., Wang, D., Deng, X., & Li, Z. (2017) · Catal. Sci. Technol. · doi:10.1039/c7cy01653k · Cited by 332
CO2 Capture in Metal–Organic Framework Adsorbents: An Engineering Perspective
Hu, Z., Wang, Y., Shah, B. B., & Zhao, D. (2019) · Advanced Sustainable Systems · doi:10.1002/adsu.201800080 · Cited by 297
Samanta, P., Desai, A. V., Let, S., & Ghosh, S. K. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b00155 · Cited by 288
Recent progress in metal-organic frameworks (MOFs) for CO2 capture at different pressures
Mahajan, S., & Lahtinen, M. (2022) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2022.108930 · Cited by 282
Han, Z., Yang, Y., Rushlow, J., Huo, J., Liu, Z., Hsu, Y.-C., Yin, R., Wang, M., Liang, R., Wang, K.-Y., et al. (2025) · Chemical Society Reviews · doi:10.1039/d4cs00432a · Cited by 272
Felix Sahayaraj, A., Joy Prabu, H., Maniraj, J., Kannan, M., Bharathi, M., Diwahar, P., & Salamon, J. (2023) · Journal of Inorganic and Organometallic Polymers and Materials · doi:10.1007/s10904-023-02657-1 · Cited by 267
Overview of Carbon Capture Technology: Microalgal Biorefinery Concept and State-of-the-Art
Singh, J., & Dhar, D. W. (2019) · Frontiers in Marine Science · doi:10.3389/fmars.2019.00029 · Cited by 264
Siegelman, R. L., Milner, P. J., Kim, E. J., Weston, S. C., & Long, J. R. (2019) · Energy & Environmental Science · doi:10.1039/c9ee00505f · Cited by 203
Analyses of Adsorption Behavior of CO2, CH4, and N2 on Different Types of BETA Zeolites
Henrique, A., Karimi, M., Silva, J. A. C., & Rodrigues, A. E. (2019) · Chemical Engineering & Technology · doi:10.1002/ceat.201800386 · Cited by 51
Inclusion of viologen cations leads to switchable metal–organic frameworks
Cadman, L. K., Mahon, M. F., & Burrows, A. D. (2021) · Faraday Discussions · doi:10.1039/c9fd00137a · Cited by 11
Metadata
- Authors
- Lin, Y., Kong, C., Zhang, Q., & Chen, L.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2016-12-05
- Volume
- 7
- Issue
- 4
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2559884340
- Cited by
- 443
- References
- 212
- FWCI
- 17.39
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.