The DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index.
Synergic Interface Optimization with Green Solvent Engineering in Mixed Perovskite Solar Cells
Abstract
Organic–inorganic hybrid halide perovskite solar cells (PSCs) have recently drawn enormous attentions due to their impressive performance (>22%) and low temperature solution processability (<150 °C). Current solution process involves application of a large amount of toxic solvents, such as chlorobenzene, which is heavily employed in both the perovskite layer and the hole transport layer (HTL) deposition. Herein, this study employs green solvent of ethyl acetate for engineering efficient perovskite and HTL layers, which enables a synergic interface (perovskite/HTL) optimization. A champion efficiency of 19.43% is obtained for small cells (0.16 cm 2 with mask) and over 14% for large size modules (5 × 5 cm 2). The PSCs prepared from the green solvent engineering demonstrate superior performance on both efficiency and stability over their chlorobenzene counterparts. These enhancements are ascribed to the in situ inhibition on carrier recombination induced by interfacial defects during the solution processing, which enables about 2/3 reduction of calculated recombination rate. Thus, the green solvent route shows the great potential toward environmental‐friendly manufacturing.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Interface engineering of highly efficient perovskite solar cells
Zhou, H., Chen, Q., Li, G., Luo, S., Song, T.-B., Duan, H.-S., Hong, Z., You, J., Liu, Y., & Yang, Y. (2014) · Science · doi:10.1126/science.1254050 · Cited by 6,632
Electron-hole diffusion lengths > 175 μm in solution-grown CH 3 NH 3 PbI 3 single crystals
Dong, Q., Fang, Y., Shao, Y., Mulligan, P., Qiu, J., Cao, L., & Huang, J. (2015) · Science · doi:10.1126/science.aaa5760 · Cited by 5,643
Saliba, M., Matsui, T., Seo, J.-Y., Domanski, K., Correa-Baena, J.-P., Nazeeruddin, M. K., Zakeeruddin, S. M., Tress, W., Abate, A., Hagfeldt, A., et al. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03874j · Cited by 5,440
Low trap-state density and long carrier diffusion in organolead trihalide perovskite single crystals
Shi, D., Adinolfi, V., Comin, R., Yuan, M., Alarousu, E., Buin, A., Chen, Y., Hoogland, S., Rothenberger, A., Katsiev, K., et al. (2015) · Science · doi:10.1126/science.aaa2725 · Cited by 5,139
Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance
Saliba, M., Matsui, T., Domanski, K., Seo, J.-Y., Ummadisingu, A., Zakeeruddin, S. M., Correa-Baena, J.-P., Tress, W. R., Abate, A., Hagfeldt, A., et al. (2016) · Science · doi:10.1126/science.aah5557 · Cited by 3,706
High-efficiency solution-processed perovskite solar cells with millimeter-scale grains
Nie, W., Tsai, H., Asadpour, R., Blancon, J.-C., Neukirch, A. J., Gupta, G., Crochet, J. J., Chhowalla, M., Tretiak, S., Alam, M. A., et al. (2015) · Science · doi:10.1126/science.aaa0472 · Cited by 3,295
Cited by
Perovskite precursor solution chemistry: from fundamentals to photovoltaic applications
Jung, M., Ji, S.-G., Kim, G., & Seok, S. I. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00656c · Cited by 816
Bu, T., Li, J., Zheng, F., Chen, W., Wen, X., Ku, Z., Peng, Y., Zhong, J., Cheng, Y.-B., & Huang, F. (2018) · Nature Communications · doi:10.1038/s41467-018-07099-9 · Cited by 815
Self-citationSelf-driving laboratory for accelerated discovery of thin-film materials
MacLeod, B. P., Parlane, F. G. L., Morrissey, T. D., Häse, F., Roch, L. M., Dettelbach, K. E., Moreira, R., Yunker, L. P. E., Rooney, M. B., Deeth, J. R., et al. (2020) · Science Advances · doi:10.1126/sciadv.aaz8867 · Cited by 809
Understanding of perovskite crystal growth and film formation in scalable deposition processes
Liu, C., Cheng, Y.-B., & Ge, Z. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00711c · Cited by 675
Self-citationSynthetic Approaches for Halide Perovskite Thin Films
Dunlap-Shohl, W. A., Zhou, Y., Padture, N. P., & Mitzi, D. B. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00318 · Cited by 631
Bu, T., Liu, X., Zhou, Y., Yi, J., Huang, X., Luo, L., Xiao, J., Ku, Z., Peng, Y., Huang, F., et al. (2017) · Energy & Environmental Science · doi:10.1039/c7ee02634j · Cited by 516
Self-citationRecent progress in tin-based perovskite solar cells
Cao, J., & Yan, F. (2021) · Energy & Environmental Science · doi:10.1039/d0ee04007j · Cited by 479
Rajagopal, A., Yao, K., & Jen, A. K. ‐. (2018) · Advanced Materials · doi:10.1002/adma.201800455 · Cited by 429
Biodegradable Materials and Green Processing for Green Electronics
Li, W., Liu, Q., Zhang, Y., Li, C., He, Z., Choy, W. C. H., Low, P. J., Sonar, P., & Kyaw, A. K. K. (2020) · Advanced Materials · doi:10.1002/adma.202001591 · Cited by 388
Achievements, challenges, and future prospects for industrialization of perovskite solar cells
Yang, C., Hu, W., Liu, J., Han, C., Gao, Q., Mei, A., Zhou, Y., Guo, F., & Han, H. (2024) · Light: Science & Applications · doi:10.1038/s41377-024-01461-x · Cited by 388
Highly Efficient Thermally Co-evaporated Perovskite Solar Cells and Mini-modules
Li, J., Wang, H., Chin, X. Y., Dewi, H. A., Vergeer, K., Goh, T. W., Lim, J. W. M., Lew, J. H., Loh, K. P., Soci, C., et al. (2020) · Joule · doi:10.1016/j.joule.2020.03.005 · Cited by 378
Solvent Engineering of the Precursor Solution toward Large‐Area Production of Perovskite Solar Cells
Chao, L., Niu, T., Gao, W., Ran, C., Song, L., Chen, Y., & Huang, W. (2021) · Advanced Materials · doi:10.1002/adma.202005410 · Cited by 354
Chao, L., Xia, Y., Li, B., Xing, G., Chen, Y., & Huang, W. (2019) · Chem · doi:10.1016/j.chempr.2019.02.025 · Cited by 324
Yang, Z., Zhang, W., Wu, S., Zhu, H., Liu, Z., Liu, Z., Jiang, Z., Chen, R., Zhou, J., Lu, Q., et al. (2021) · Science Advances · doi:10.1126/sciadv.abg3749 · Cited by 324
Short‐Chain Ligand‐Passivated Stable α‐CsPbI3 Quantum Dot for All‐Inorganic Perovskite Solar Cells
Chen, K., Zhong, Q., Chen, W., Sang, B., Wang, Y., Yang, T., Liu, Y., Zhang, Y., & Zhang, H. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201900991 · Cited by 302
Mechanisms and Suppression of Photoinduced Degradation in Perovskite Solar Cells
Wei, J., Wang, Q., Huo, J., Gao, F., Gan, Z., Zhao, Q., & Li, H. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202002326 · Cited by 260
Solution‐Processable Perovskite Solar Cells toward Commercialization: Progress and Challenges
Wang, P., Wu, Y., Cai, B., Ma, Q., Zheng, X., & Zhang, W. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201807661 · Cited by 255
Metadata
- Authors
- Bu, T., Wu, L., Liu, X., Yang, X., Zhou, P., Yu, X., Qin, T., Shi, J., Wang, S., Li, S., Ku, Z., Peng, Y., Huang, F., Meng, Q., Cheng, Y., & Zhong, J.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2017-07-18
- Volume
- 7
- Issue
- 20
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2739277643
- Cited by
- 309
- References
- 45
- FWCI
- 14.54
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.