The DOI matches its Crossref record; 217 of the 217 references it cites were found in a registry or an index.
Biodegradable Materials and Green Processing for Green Electronics
Open accessAbstract
There is little question that the “electronic revolution” of the 20th century has impacted almost every aspect of human life. However, the emergence of solid‐state electronics as a ubiquitous feature of an advanced modern society is posing new challenges such as the management of electronic waste (e‐waste) that will remain through the 21st century. In addition to developing strategies to manage such e‐waste, further challenges can be identified concerning the conservation and recycling of scarce elements, reducing the use of toxic materials and solvents in electronics processing, and lowering energy usage during fabrication methods. In response to these issues, the construction of electronic devices from renewable or biodegradable materials that decompose to harmless by‐products is becoming a topic of great interest. Such “green” electronic devices need to be fabricated on industrial scale through low‐energy and low‐cost methods that involve low/non‐toxic functional materials or solvents. This review highlights recent advances in the development of biodegradable materials and processing strategies for electronics with an emphasis on areas where green electronic devices show the greatest promise, including solar cells, organic field‐effect transistors, light‐emitting diodes, and other electronic devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Compositional engineering of perovskite materials for high-performance solar cells
Jeon, N. J., Noh, J. H., Yang, W. S., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Nature · doi:10.1038/nature14133 · Cited by 6,431
Stoumpos, C. C., Malliakas, C. D., & Kanatzidis, M. G. (2013) · Inorganic Chemistry · doi:10.1021/ic401215x · Cited by 5,416
Surface passivation of perovskite film for efficient solar cells
Jiang, Q., Zhao, Y., Zhang, X., Yang, X., Chen, Y., Chu, Z., Ye, Q., Li, X., Yin, Z., & You, J. (2019) · Nature Photonics · doi:10.1038/s41566-019-0398-2 · Cited by 4,736
Fundamentals of zinc oxide as a semiconductor
Janotti, A., & Van de Walle, C. G. (2009) · Reports on Progress in Physics · doi:10.1088/0034-4885/72/12/126501 · Cited by 3,948
Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance
Saliba, M., Matsui, T., Domanski, K., Seo, J.-Y., Ummadisingu, A., Zakeeruddin, S. M., Correa-Baena, J.-P., Tress, W. R., Abate, A., Hagfeldt, A., et al. (2016) · Science · doi:10.1126/science.aah5557 · Cited by 3,706
Electrical Conductivity in Doped Polyacetylene
Chiang, C. K., Fincher, C. R., Park, Y. W., Heeger, A. J., Shirakawa, H., Louis, E. J., Gau, S. C., & MacDiarmid, A. G. (1977) · Physical Review Letters · doi:10.1103/physrevlett.39.1098 · Cited by 3,369
High-efficiency solution-processed perovskite solar cells with millimeter-scale grains
Nie, W., Tsai, H., Asadpour, R., Blancon, J.-C., Neukirch, A. J., Gupta, G., Crochet, J. J., Chhowalla, M., Tretiak, S., Alam, M. A., et al. (2015) · Science · doi:10.1126/science.aaa0472 · Cited by 3,295
Materials fabrication from Bombyx mori silk fibroin
Rockwood, D. N., Preda, R. C., Yücel, T., Wang, X., Lovett, M. L., & Kaplan, D. L. (2011) · Nature Protocols · doi:10.1038/nprot.2011.379 · Cited by 3,066
Lead-free solid-state organic–inorganic halide perovskite solar cells
Hao, F., Stoumpos, C. C., Cao, D. H., Chang, R. P. H., & Kanatzidis, M. G. (2014) · Nature Photonics · doi:10.1038/nphoton.2014.82 · Cited by 3,026
Cited by
Biodegradable Materials for Sustainable Health Monitoring Devices
Hosseini, E. S., Dervin, S., Ganguly, P., & Dahiya, R. (2021) · ACS Applied Bio Materials · doi:10.1021/acsabm.0c01139 · Cited by 326
The green solvent: a critical perspective
Winterton, N. (2021) · Clean Technologies and Environmental Policy · doi:10.1007/s10098-021-02188-8 · Cited by 307
Design, manufacturing and applications of wearable triboelectric nanogenerators
Wang, H., Han, M., Song, Y., & Zhang, H. (2021) · Nano Energy · doi:10.1016/j.nanoen.2020.105627 · Cited by 179
A Bioresorbable Dynamic Pressure Sensor for Cardiovascular Postoperative Care
Ouyang, H., Li, Z., Gu, M., Hu, Y., Xu, L., Jiang, D., Cheng, S., Zou, Y., Deng, Y., Shi, B., et al. (2021) · Advanced Materials · doi:10.1002/adma.202102302 · Cited by 160
Metadata
- Authors
- Li, W., Liu, Q., Zhang, Y., Li, C., He, Z., Choy, W. C. H., Low, P. J., Sonar, P., & Kyaw, A. K. K.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2020-06-25
- Volume
- 32
- Issue
- 33
- Pages
- e2001591-e2001591
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W3037572749
- Cited by
- 388
- References
- 217
- FWCI
- 15.44
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Biodegradable Materials and Green Processing for Green Electronics. https://app.cochat.ai/papers/10.1002/adma.202001591
- The paper
- Li, W., Liu, Q., Zhang, Y., Li, C., He, Z., Choy, W. C. H., Low, P. J., Sonar, P., & Kyaw, A. K. K. (2020). Biodegradable Materials and Green Processing for Green Electronics. Advanced Materials. https://doi.org/10.1002/adma.202001591
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.