The DOI matches its Crossref record; 47 of the 47 references it cites were found in a registry or an index.
Cesium Doped NiOx as an Efficient Hole Extraction Layer for Inverted Planar Perovskite Solar Cells
Abstract
Organic–inorganic hybrid perovskite solar cells have resulted in tremendous interest in developing next generation photovoltaics due to high record efficiency exceeding 22%. For inverted structure perovskite solar cells, the hole extraction layers play a significant role in achieving efficient and stable perovskite solar cell by modifying charge extraction, interfacial recombination losses, and band alignment. Here, cesium doped NiOx is selected as a hole extraction layer to study the impact of Cs dopant on the optoelectronic properties of NiOx and the photovoltaic performance. Cs doped NiOx films are prepared by a simple solution‐based method. Both doped and undoped NiOx films are smooth and highly transparent, while the Cs doped NiOx exhibits better electron conductivity and higher work function. Therefore, Cs doping results in a significant improvement in the performance of NiOx‐based inverted planar perovskite solar cells. The best efficiency of Cs doped NiOx devices is 19.35%, and those devices show high stability as well. The improved efficiency in devices with Cs:NiOx is attributed to a significant improvement in the hole extraction and better band alignment compared to undoped NiOx. This work reveals that Cs doped NiOx is very promising hole extraction material for high and stable inverted perovskite solar cells.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Efficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
Long-Range Balanced Electron- and Hole-Transport Lengths in Organic-Inorganic CH 3 NH 3 PbI 3
Xing, G., Mathews, N., Sun, S., Lim, S. S., Lam, Y. M., Grätzel, M., Mhaisalkar, S., & Sum, T. C. (2013) · Science · doi:10.1126/science.1243167 · Cited by 6,909
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Organic–Inorganic Perovskites: Structural Versatility for Functional Materials Design
Saparov, B., & Mitzi, D. B. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00715 · Cited by 2,907
Efficient and stable solution-processed planar perovskite solar cells via contact passivation
Tan, H., Jain, A., Voznyy, O., Lan, X., García de Arquer, F. P., Fan, J. Z., Quintero-Bermudez, R., Yuan, M., Zhang, B., Zhao, Y., et al. (2017) · Science · doi:10.1126/science.aai9081 · Cited by 2,342
Efficient and stable large-area perovskite solar cells with inorganic charge extraction layers
Chen, W., Wu, Y., Yue, Y., Liu, J., Zhang, W., Yang, X., Chen, H., Bi, E., Ashraful, I., Grätzel, M., et al. (2015) · Science · doi:10.1126/science.aad1015 · Cited by 2,279
Self-citationImproved air stability of perovskite solar cells via solution-processed metal oxide transport layers
You, J., Meng, L., Song, T.-B., Guo, T.-F., Yang, Y. (., Chang, W.-H., Hong, Z., Chen, H., Zhou, H., Chen, Q., et al. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2015.230 · Cited by 2,123
Jiang, Q., Zhang, L., Wang, H., Yang, X., Meng, J., Liu, H., Yin, Z., Wu, J., Zhang, X., & You, J. (2016) · Nature Energy · doi:10.1038/nenergy.2016.177 · Cited by 2,024
Atomic Screening Constants from SCF Functions. II. Atoms with 37 to 86 Electrons
Clementi, E., Raimondi, D. L., & Reinhardt, W. P. (1967) · The Journal of Chemical Physics · doi:10.1063/1.1712084 · Cited by 1,544
Perovskite as Light Harvester: A Game Changer in Photovoltaics
Kazim, S., Nazeeruddin, M. K., Grätzel, M., & Ahmad, S. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201308719 · Cited by 962
Jeng, J., Chen, K., Chiang, T., Lin, P., Tsai, T., Chang, Y., Guo, T., Chen, P., Wen, T., & Hsu, Y. (2014) · Advanced Materials · doi:10.1002/adma.201306217 · Cited by 710
Zhang, H., Cheng, J., Lin, F., He, H., Mao, J., Wong, K. S., Jen, A. K.-Y., & Choy, W. C. H. (2016) · ACS Nano · doi:10.1021/acsnano.5b07043 · Cited by 560
Park, J. H., Seo, J., Park, S., Shin, S. S., Kim, Y. C., Jeon, N. J., Shin, H., Ahn, T. K., Noh, J. H., Yoon, S. C., et al. (2015) · Advanced Materials · doi:10.1002/adma.201500523 · Cited by 550
Solution‐Processed Nickel Oxide Hole Transport Layers in High Efficiency Polymer Photovoltaic Cells
Manders, J. R., Tsang, S., Hartel, M. J., Lai, T., Chen, S., Amb, C. M., Reynolds, J. R., & So, F. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201202269 · Cited by 541
Solution-Processed Cu2O and CuO as Hole Transport Materials for Efficient Perovskite Solar Cells
Zuo, C., & Ding, L. (2015) · Small · doi:10.1002/smll.201501330 · Cited by 529
Highly Efficient Flexible Perovskite Solar Cells Using Solution-Derived NiOx Hole Contacts
Yin, X., Chen, P., Que, M., Xing, Y., Que, W., Niu, C., & Shao, J. (2016) · ACS Nano · doi:10.1021/acsnano.5b08135 · Cited by 476
Beyond Efficiency: the Challenge of Stability in Mesoscopic Perovskite Solar Cells
Rong, Y., Liu, L., Mei, A., Li, X., & Han, H. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501066 · Cited by 473
Jung, J. W., Chueh, C., & Jen, A. K. ‐. (2015) · Advanced Materials · doi:10.1002/adma.201503298 · Cited by 458
P-type transparent conducting oxides
Zhang, K. H. L., Xi, K., Blamire, M. G., & Egdell, R. G. (2016) · Journal of Physics: Condensed Matter · doi:10.1088/0953-8984/28/38/383002 · Cited by 412
High‐Efficiency Solution‐Processed Planar Perovskite Solar Cells with a Polymer Hole Transport Layer
Zhao, D., Sexton, M., Park, H., Baure, G., Nino, J. C., & So, F. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401855 · Cited by 380
Seo, S., Park, I. J., Kim, M., Lee, S., Bae, C., Jung, H. S., Park, N.-G., Kim, J. Y., & Shin, H. (2016) · Nanoscale · doi:10.1039/c6nr01601d · Cited by 380
Wang, K.-C., Shen, P.-S., Li, M.-H., Chen, S., Lin, M.-W., Chen, P., & Guo, T.-F. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am503610u · Cited by 358
Inorganic Hole Conducting Layers for Perovskite-Based Solar Cells
Subbiah, A. S., Halder, A., Ghosh, S., Mahuli, N., Hodes, G., & Sarkar, S. K. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz500645n · Cited by 347
Highly Efficient Flexible Perovskite Solar Cells UsingSolution-Derived NiOx Hole Contacts
Yin, X., Chen, P., Meidan, Q., Yonglei, X., Que, W., Chunming, N., & Shao, J. (2016) · INDIGO (University of Illinois at Chicago) · doi:10.1021/acsnano.5b08135.s001 · Cited by 340
Cao, K., Zuo, Z., Cui, J., Shen, Y., Moehl, T., Zakeeruddin, S. M., Grätzel, M., & Wang, M. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.08.009 · Cited by 296
Hole‐Transporting Materials in Inverted Planar Perovskite Solar Cells
Yan, W., Ye, S., Li, Y., Sun, W., Rao, H., Liu, Z., Bian, Z., & Huang, C. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600474 · Cited by 277
Sequential Deposition of CH3NH3PbI3 on Planar NiO Film for Efficient Planar Perovskite Solar Cells
Hu, L., Peng, J., Wang, W., Xia, Z., Yuan, J., Lu, J., Huang, X., Ma, W., Song, H., Chen, W., et al. (2014) · ACS Photonics · doi:10.1021/ph5000067 · Cited by 259
Self-citationXue, Q., Bai, Y., Liu, M., Xia, R., Hu, Z., Chen, Z., Jiang, X., Huang, F., Yang, S., Matsuo, Y., et al. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602333 · Cited by 243
Zhang, Y., Cui, W., Zhu, Y., Zu, F., Liao, L., Lee, S.-T., & Sun, B. (2015) · Energy & Environmental Science · doi:10.1039/c4ee02282c · Cited by 231
CH3NH3PbI3-Based Planar Solar Cells with Magnetron-Sputtered Nickel Oxide
Cui, J., Meng, F., Zhang, H., Cao, K., Yuan, H., Cheng, Y., Huang, F., & Wang, M. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am507108u · Cited by 231
Agresti, A., Pescetelli, S., Palma, A. L., Del Rio Castillo, A. E., Konios, D., Kakavelakis, G., Razza, S., Cinà, L., Kymakis, E., Bonaccorso, F., et al. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00672 · Cited by 225
Kwon, U., Kim, B.-G., Nguyen, D. C., Park, J.-H., Ha, N. Y., Kim, S.-J., Ko, S. H., Lee, S., Lee, D., & Park, H. J. (2016) · Scientific Reports · doi:10.1038/srep30759 · Cited by 219
Chen, W., Xu, L., Feng, X., Jie, J., & He, Z. (2017) · Advanced Materials · doi:10.1002/adma.201603923 · Cited by 215
Self-citationKakavelakis, G., Maksudov, T., Konios, D., Paradisanos, I., Kioseoglou, G., Stratakis, E., & Kymakis, E. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602120 · Cited by 211
Liao, H., Guo, P., Hsu, C., Lin, M., Wang, B., Zeng, L., Huang, W., Soe, C. M. M., Su, W., Bedzyk, M. J., et al. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601660 · Cited by 211
Overcoming the Interface Losses in Planar Heterojunction Perovskite‐Based Solar Cells
Hou, Y., Chen, W., Baran, D., Stubhan, T., Luechinger, N. A., Hartmeier, B., Richter, M., Min, J., Chen, S., Quiroz, C. O. R., et al. (2016) · Advanced Materials · doi:10.1002/adma.201504168 · Cited by 206
Self-citationYang, Z., Chueh, C.-C., Liang, P.-W., Crump, M., Lin, F., Zhu, Z., & Jen, A. K.-Y. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.02.033 · Cited by 201
Inorganic p-type contact materials for perovskite-based solar cells
Li, M.-H., Shen, P.-S., Wang, K.-C., Guo, T.-F., & Chen, P. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta06425a · Cited by 158
Natu, G., Hasin, P., Huang, Z., Ji, Z., He, M., & Wu, Y. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am301565j · Cited by 150
Corani, A., Li, M.-H., Shen, P., Chen, P., Guo, T., Nahhas, A. E., Zheng, K., Yartsev, A. P., Sundström, V., & Ponseca, C. S. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b00238 · Cited by 115
NiO/MAPbI3-xClx/PCBM: A Model Case for an Improved Understanding of Inverted Mesoscopic Solar Cells
Trifiletti, V., Roiati, V., Colella, S., Giannuzzi, R., Marco, L. D., Rizzo, A., Manca, M., Listorti, A., & Gigli, G. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am508678p · Cited by 62
Chia-Ching, W., & Yang, C. (2014) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2014.09.017 · Cited by 61
Chen, W., Zhang, G.-N., Xu, L., Gu, R., Xu, Z., Wang, H., & He, Z. (2016) · Materials Today Energy · doi:10.1016/j.mtener.2016.11.001 · Cited by 46
Self-citationSolution processed nickel oxide anodes for organic photovoltaic devices
Mustafa, B. T., Griffin, J., Alsulami, A., Lidzey, D. G., & Buckley, A. (2014) · Applied Physics Letters · doi:10.1063/1.4865090 · Cited by 43
Cited by
Enhanced photovoltage for inverted planar heterojunction perovskite solar cells
Luo, D., Yang, W., Wang, Z., Sadhanala, A., Hu, Q., Su, R., Shivanna, R., Trindade, G. F., Watts, J. F., Xu, Z., et al. (2018) · Science · doi:10.1126/science.aap9282 · Cited by 1,510
Recent Progresses on Defect Passivation toward Efficient Perovskite Solar Cells
Gao, F., Zhao, Y., Zhang, X., & You, J. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201902650 · Cited by 782
Causes and Solutions of Recombination in Perovskite Solar Cells
Chen, J., & Park, N. (2019) · Advanced Materials · doi:10.1002/adma.201803019 · Cited by 733
Defect and Contact Passivation for Perovskite Solar Cells
Aydin, E., De Bastiani, M., & De Wolf, S. (2019) · Advanced Materials · doi:10.1002/adma.201900428 · Cited by 681
Boyd, C. C., Shallcross, R. C., Moot, T., Kerner, R., Bertoluzzi, L., Onno, A., Kavadiya, S., Chosy, C., Wolf, E. J., Werner, J., et al. (2020) · Joule · doi:10.1016/j.joule.2020.06.004 · Cited by 639
Metadata
- Authors
- Chen, W., Liu, F., Feng, X., Djurišić, A. B., Chan, W. K., & He, Z.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2017-06-12
- Volume
- 7
- Issue
- 19
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2624043175
- Cited by
- 457
- References
- 47
- FWCI
- 20.47
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.