The DOI matches its Crossref record; 119 of the 119 references it cites were found in a registry or an index.
Beyond Efficiency: the Challenge of Stability in Mesoscopic Perovskite Solar Cells
Abstract
Over the past five years, the rapid emergence of a new class of solar cell based on mixed organic–inorganic halide perovskite semiconductors has captured the attention of scientists and researchers in the field of energy conversion. Benefiting from the optimization of perovskite film deposition approaches, the design of new material systems, and the diversity of device concepts, the efficiency of perovskite solar cells (PSCs) has increased from 2.19% in 2006 to a certified 20.1% in 2014, making this the fastest‐advancing solar cell technology to date. However, as a photovoltaic technology, which needs to meet the requirements of working under long‐term sunlight, PSCs suffer stability concerns for both materials and devices. Evolved from dye‐sensitized solar cells (DSSCs), PSCs usually contain a mesoporous electron transporting layer or scaffold layer, a perovskite active layer, a hole transporting layer and a back contact to construct a mesoscopic‐structured device. Using interface engineering, mesoscopic PSCs (MPSCs) have obtained exciting stability with a hole‐conductor‐free printable triple‐layer architecture or conventional heterojunction version. Herein, the achievements of mesoscopic solar cells from solid‐state DSSCs to MPSCs are outlined and summary of recent progress in the stability of MPSCs is presented. Possible degradation mechanism and solutions are presented and, finally, challenges for the commercialization of this photovoltaic technology are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films
O'Regan, B., & Grätzel, M. (1991) · Nature · doi:10.1038/353737a0 · Cited by 28,599
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Grätzel, M. (2001) · Nature · doi:10.1038/35104607 · Cited by 12,687
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Hagfeldt, A., Boschloo, G., Sun, L., Kloo, L., & Pettersson, H. (2010) · Chemical Reviews · doi:10.1021/cr900356p · Cited by 8,931
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Efficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
The emergence of perovskite solar cells
Green, M. A., Ho-Baillie, A., & Snaith, H. J. (2014) · Nature Photonics · doi:10.1038/nphoton.2014.134 · Cited by 7,432
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Cited by
Efficient, stable and scalable perovskite solar cells using poly(3-hexylthiophene)
Jung, E. H., Jeon, N. J., Park, E. Y., Moon, C. S., Shin, T. J., Yang, T.-Y., Noh, J. H., & Seo, J. (2019) · Nature · doi:10.1038/s41586-019-1036-3 · Cited by 2,305
A Review of Perovskites Solar Cell Stability
Wang, R., Mujahid, M., Duan, Y., Wang, Z., Xue, J., & Yang, Y. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201808843 · Cited by 1,310
2D Ruddlesden–Popper Perovskites for Optoelectronics
Chen, Y., Sun, Y., Peng, J., Tang, J., Zheng, K., & Liang, Z. (2018) · Advanced Materials · doi:10.1002/adma.201703487 · Cited by 892
Improving efficiency and stability of perovskite solar cells with photocurable fluoropolymers
Bella, F., Griffini, G., Correa-Baena, J.-P., Saracco, G., Grätzel, M., Hagfeldt, A., Turri, S., & Gerbaldi, C. (2016) · Science · doi:10.1126/science.aah4046 · Cited by 870
Causes and Solutions of Recombination in Perovskite Solar Cells
Chen, J., & Park, N. (2019) · Advanced Materials · doi:10.1002/adma.201803019 · Cited by 733
Metadata
- Authors
- Rong, Y., Liu, L., Mei, A., Li, X., & Han, H.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2015-09-24
- Volume
- 5
- Issue
- 20
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2128129463
- Cited by
- 473
- References
- 119
- FWCI
- 33.20
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Beyond Efficiency: the Challenge of Stability in Mesoscopic Perovskite Solar Cells. https://app.cochat.ai/papers/10.1002/aenm.201501066
- The paper
- Rong, Y., Liu, L., Mei, A., Li, X., & Han, H. (2015). Beyond Efficiency: the Challenge of Stability in Mesoscopic Perovskite Solar Cells. Advanced Energy Materials. https://doi.org/10.1002/aenm.201501066
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
