The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Role of Microstructure in Oxygen Induced Photodegradation of Methylammonium Lead Triiodide Perovskite Films
Abstract
This paper investigates the impact of microstructure on the degradation rate of methylammonium lead triiodide (MAPbI 3) perovskite films upon exposure to light and oxygen. By comparing the oxygen induced degradation of perovskite films of different microstructure–fabricated using either a lead acetate trihydrate precursor or a solvent engineering technique–it is demonstrated that films with larger and more uniform grains and better electronic quality show a significantly reduced degradation compared to films with smaller, more irregular grains. The effect of degradation on the optical, compositional, and microstructural properties of the perovskite layers is characterized and it is demonstrated that oxygen induced degradation is initiated at the layer surface and grain boundaries. It is found that under illumination, irreversible degradation can occur at oxygen levels as low as 1%, suggesting that degradation can commence already during the device fabrication stage. Finally, this work establishes that improved thin‐film microstructure, with large uniform grains and a low density of defects, is a prerequisite for enhanced stability necessary in order to make MAPbI 3 a promising long lived and low cost alternative for future photovoltaic applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Impact of microstructure on local carrier lifetime in perovskite solar cells
de Quilettes, D. W., Vorpahl, S. M., Stranks, S. D., Nagaoka, H., Eperon, G. E., Ziffer, M. E., Snaith, H. J., & Ginger, D. S. (2015) · Science · doi:10.1126/science.aaa5333 · Cited by 2,198
Self-citation
Cited by
Planar perovskite solar cells with long-term stability using ionic liquid additives
Bai, S., Da, P., Li, C., Wang, Z., Yuan, Z., Fu, F., Kawecki, M., Liu, X., Sakai, N., Wang, J. T.-W., et al. (2019) · Nature · doi:10.1038/s41586-019-1357-2 · Cited by 1,458
Self-citationIn Situ Growth of 2D Perovskite Capping Layer for Stable and Efficient Perovskite Solar Cells
Chen, P., Bai, Y., Wang, S., Lyu, M., Yun, J., & Wang, L. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201706923 · Cited by 776
Lead‐Free Halide Perovskite Materials and Optoelectronic Devices: Progress and Prospective
López‐Fernández, I., Valli, D., Wang, C., Samanta, S., Okamoto, T., Huang, Y., Sun, K., Liu, Y., Chirvony, V. S., Patra, A., et al. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202307896 · Cited by 327
Li, C., Guerrero, A., Huettner, S., & Bisquert, J. (2018) · Nature Communications · doi:10.1038/s41467-018-07571-6 · Cited by 296
Gharibzadeh, S., Fassl, P., Hossain, I. M., Rohrbeck, P., Frericks, M., Schmidt, M., Duong, T., Khan, M. R., Abzieher, T., Nejand, B. A., et al. (2021) · Energy & Environmental Science · doi:10.1039/d1ee01508g · Cited by 289
Self-citationGrain‐Boundary “Patches” by In Situ Conversion to Enhance Perovskite Solar Cells Stability
Liu, L., Huang, S., Lu, Y., Liu, P., Zhao, Y., Shi, C., Zhang, S., Wu, J., Zhong, H., Sui, M., et al. (2018) · Advanced Materials · doi:10.1002/adma.201800544 · Cited by 283
The Future of Perovskite Photovoltaics—Thermal Evaporation or Solution Processing?
Vaynzof, Y. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202003073 · Cited by 272
Self-citationZhuang, J., Mao, P., Luan, Y., Yi, X., Tu, Z., Zhang, Y., Yi, Y., Wei, Y., Chen, N., Lin, T., et al. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.9b02375 · Cited by 266
Shen, H., Duong, T., Peng, J., Jacobs, D., Wu, N., Gong, J., Wu, Y., Karuturi, S. K., Fu, X., Weber, K., et al. (2018) · Energy & Environmental Science · doi:10.1039/c7ee02627g · Cited by 257
How machine learning can help select capping layers to suppress perovskite degradation
Hartono, N. T. P., Thapa, J., Tiihonen, A., Oviedo, F., Batali, C., Yoo, J. J., Liu, Z., Li, R., Marrón, D. F., Bawendi, M. G., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-17945-4 · Cited by 189
Mechanical Durability and Flexibility in Perovskite Photovoltaics: Advancements and Applications
Song, F., Zheng, D., Feng, J., Liu, J., Ye, T., Li, Z., Wang, K., Liu, S. (., & Yang, D. (2024) · Advanced Materials · doi:10.1002/adma.202312041 · Cited by 113
Metadata
- Authors
- Sun, Q., Fassl, P., Becker‐Koch, D., Bausch, A., Rivkin, B., Bai, S., Hopkinson, P. E., Snaith, H. J., & Vaynzof, Y.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2017-07-14
- Volume
- 7
- Issue
- 20
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2735893496
- Cited by
- 246
- References
- 3
- FWCI
- 9.17
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.