The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Prescribing Functional Additives for Treating the Poor Performances of High‐Voltage (5 V‐class) LiNi0.5Mn1.5O4/MCMB Li‐Ion Batteries
Abstract
In this paper, tris(trimethylsilyl) phosphite (TMSP) and 1,3‐propanediolcyclic sulfate (PCS) are unprecedentedly prescribed as binary functional additives for treating the poor performances of high‐voltage (5 V‐class) LiNi 0.5 Mn 1.5 O 4/MCMB (graphitic mesocarbon microbeads) Li‐ion batteries at both room temperature and 50 °C. The high‐voltage LiNi 0.5 Mn 1.5 O 4/MCMB cell with binary functional additives shows a preponderant discharge capacity retention of 79.5% after 500 cycles at 0.5 C rate at room temperature. By increasing the current intensity from 0.2 to 5 C rate, the discharge capacity retention of the high‐voltage cell with binary functional additives is ≈90%, while the counterpart is only ≈55%. By characterizations, it is rationally demonstrated that the binary functional additives decompose and participate in the modification of solid–electrolyte interface layers (both electrodes), which are more conductive, protective, and resistant to electrolyte oxidative/reductive decompositions (accompanying active‐Li+ consuming parasitic reactions) due to synergistic effects. Specifically, the TMSP additive can stabilize LiPF 6 salt and scavenge erosive hydrofluoric acid. More encouragingly, at 50 °C, the high‐voltage cell with binary functional additives holds an ultrahigh discharge capacity retention of 79.5% after 200 cycles at 1 C rate. Moreover, a third designed self‐extinguishing flame‐retardant additive of (ethoxy)‐penta‐fluoro‐cyclo‐triphosphazene (PFPN) is introduced for reducing the flammability of the aforementioned binary functional additives containing electrolyte.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrolytes and Interphases in Li-Ion Batteries and Beyond
Xu, K. (2014) · Chemical Reviews · doi:10.1021/cr500003w · Cited by 5,566
A Comparative Study of a Family of Sulfate Electrolyte Additives
Xia, J., Sinha, N. N., Chen, L. P., & Dahn, J. R. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.015403jes · Cited by 108
Self-citation
Cited by
High-voltage liquid electrolytes for Li batteries: progress and perspectives
Fan, X., & Wang, C. (2021) · Chemical Society Reviews · doi:10.1039/d1cs00450f · Cited by 980
Lithium anode stable in air for low-cost fabrication of a dendrite-free lithium battery
Shen, X., Li, Y., Qian, T., Liu, J., Zhou, J., Yan, C., & Goodenough, J. B. (2019) · Nature Communications · doi:10.1038/s41467-019-08767-0 · Cited by 386
High‐Fluorinated Electrolytes for Li–S Batteries
Zheng, J., Ji, G., Fan, X., Chen, J., Li, Q., Wang, H., Yang, Y., DeMella, K. C., Raghavan, S. R., & Wang, C. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803774 · Cited by 331
Liao, B., Li, H., Xu, M., Xing, L., Liao, Y., Ren, X., Fan, W., Yu, L., Xu, K., & Li, W. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800802 · Cited by 292
Metadata
- Authors
- Xu, G., Pang, C., Chen, B., Ma, J., Wang, X., Chai, J., Wang, Q., An, W., Zhou, X., Cui, G., & Chen, L.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2017-12-04
- Volume
- 8
- Issue
- 9
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2771597036
- Cited by
- 220
- References
- 2
- FWCI
- 8.50
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Prescribing Functional Additives for Treating the Poor Performances of High‐Voltage (5 V‐class) LiNi0.5Mn1.5O4/MCMB Li‐Ion Batteries. https://app.cochat.ai/papers/10.1002/aenm.201701398
- The paper
- Xu, G., Pang, C., Chen, B., Ma, J., Wang, X., Chai, J., Wang, Q., An, W., Zhou, X., Cui, G., & Chen, L. (2018). Prescribing Functional Additives for Treating the Poor Performances of High‐Voltage (5 V‐class) LiNi0.5Mn1.5O4/MCMB Li‐Ion Batteries. Advanced Energy Materials. https://doi.org/10.1002/aenm.201701398
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.