The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
High Energy Density Sodium‐Ion Battery with Industrially Feasible and Air‐Stable O3‐Type Layered Oxide Cathode
Abstract
Extensive effort is being made into cathode materials for sodium‐ion battery to address several fatal issues, which restrict their future application in practical sodium‐ion full cell system, such as their unsatisfactory initial Coulombic efficiency, inherent deficiency of cyclable sodium content, and poor industrial feasibility. A novel air‐stable O3‐type Na[Li 0.05 Mn 0.50 Ni 0.30 Cu 0.10 Mg 0.05]O 2 is synthesized by a coprecipitation method suitable for mass production followed by high‐temperature annealing. The microscale secondary particle, consisting of numerous primary nanocrystals, can efficiently facilitate sodium‐ion transport due to the short diffusion distance, and this cathode material also has inherent advantages for practical application because of its superior physical properties. It exhibits a reversible capacity of 172 mA h g−1 at 0.1 C and remarkable capacity retention of 70.4% after 1000 cycles at 20 C. More importantly, it offers good compatibility with pristine hard carbon as anode in the sodium‐ion full cell system, delivering a high energy density of up to 215 W h kg−1 at 0.1 C and good rate performance. Owing to the high industrial feasibility of the synthesis process, good compatibility with pristine hard carbon anode, and excellent electrochemical performance, it can be considered as a promising active material to promote progress toward sodium‐ion battery commercialization.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sodium-ion batteries: present and future
Hwang, J.-Y., Myung, S.-T., & Sun, Y.-K. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00776g · Cited by 5,305
P2-type Nax[Fe1/2Mn1/2]O2 made from earth-abundant elements for rechargeable Na batteries
Yabuuchi, N., Kajiyama, M., Iwatate, J., Nishikawa, H., Hitomi, S., Okuyama, R., Usui, R., Yamada, Y., & Komaba, S. (2012) · Nature Materials · doi:10.1038/nmat3309 · Cited by 2,270
Komaba, S., Murata, W., Ishikawa, T., Yabuuchi, N., Ozeki, T., Nakayama, T., Ogata, A., Gotoh, K., & Fujiwara, K. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201100854 · Cited by 2,116
Recent Progress in Electrode Materials for Sodium‐Ion Batteries
Kim, H., Kim, H., Ding, Z., Lee, M. H., Lim, K., Yoon, G., & Kang, K. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600943 · Cited by 986
Saravanan, K., Mason, C. W., Rudola, A., Wong, K. H., & Balaya, P. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201200803 · Cited by 810
Prototype Sodium‐Ion Batteries Using an Air‐Stable and Co/Ni‐Free O3‐Layered Metal Oxide Cathode
Mu, L., Xu, S., Li, Y., Hu, Y., Li, H., Chen, L., & Huang, X. (2015) · Advanced Materials · doi:10.1002/adma.201502449 · Cited by 704
A zero-strain layered metal oxide as the negative electrode for long-life sodium-ion batteries
Wang, Y., Yu, X., Xu, S., Bai, J., Xiao, R., Hu, Y.-S., Li, H., Yang, X.-Q., Chen, L., & Huang, X. (2013) · Nature Communications · doi:10.1038/ncomms3365 · Cited by 616
Wang, Y., Xiao, R., Hu, Y.-S., Avdeev, M., & Chen, L. (2015) · Nature Communications · doi:10.1038/ncomms7954 · Cited by 592
Routes to High Energy Cathodes of Sodium‐Ion Batteries
Fang, C., Huang, Y., Zhang, W., Han, J., Deng, Z., Cao, Y., & Yang, H. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501727 · Cited by 531
Ma, C., Alvarado, J., Xu, J. L., Clément, R. J., Kodur, M., Tong, W., Grey, C. P., & Meng, Y. S. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b00164 · Cited by 513
Peng, S., Han, X., Li, L., Zhu, Z., Cheng, F., Srinivansan, M., Adams, S., & Ramakrishna, S. (2016) · Small · doi:10.1002/smll.201502788 · Cited by 485
Wang, N., Bai, Z., Qian, Y., & Yang, J. (2016) · Advanced Materials · doi:10.1002/adma.201505918 · Cited by 472
Designing Air-Stable O3-Type Cathode Materials by Combined Structure Modulation for Na-Ion Batteries
Yao, H.-R., Wang, P.-F., Gong, Y., Zhang, J., Yu, X., Gu, L., OuYang, C., Yin, Y.-X., Hu, E., Yang, X.-Q., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b05176 · Cited by 466
Li, Y., Yang, Z., Xu, S., Mu, L., Gu, L., Hu, Y., Li, H., & Chen, L. (2015) · Advanced Science · doi:10.1002/advs.201500031 · Cited by 423
Ti-substituted tunnel-type Na0.44MnO2 oxide as a negative electrode for aqueous sodium-ion batteries
Wang, Y., Liu, J., Lee, B., Qiao, R., Yang, Z., Xu, S., Yu, X., Gu, L., Hu, Y.-S., Yang, W., et al. (2015) · Nature Communications · doi:10.1038/ncomms7401 · Cited by 395
NaCrO 2 cathode for high-rate sodium-ion batteries
Yu, C.-Y., Park, J.-S., Jung, H., Chung, K. Y., Aurbach, D., Sun, Y., & Myung, S. (2015) · Energy & Environmental Science · doi:10.1039/c5ee00695c · Cited by 378
Yuan, D., Wang, Y. X., Cao, Y., Ai, X. P., & Yang, H. X. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b00594 · Cited by 330
A Honeycomb‐Layered Na3Ni2SbO6: A High‐Rate and Cycle‐Stable Cathode for Sodium‐Ion Batteries
Yuan, D., Liang, X., Wu, L., Cao, Y., Ai, X., Feng, J., & Yang, H. (2014) · Advanced Materials · doi:10.1002/adma.201401946 · Cited by 295
Yuan, S., Zhu, Y., Wang, L., Wang, S., Xu, D., Li, L., Zhang, Y., & Zhang, X. (2016) · Advanced Materials · doi:10.1002/adma.201602469 · Cited by 273
Li, H., Peng, L., Zhu, Y., Chen, D., Zhang, X., & Yu, G. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00794e · Cited by 270
Wang, P.-F., You, Y., Yin, Y.-X., & Guo, Y.-G. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta07589d · Cited by 262
High Capacity O3-Type Na[Li0.05(Ni0.25Fe0.25Mn0.5)0.95]O2 Cathode for Sodium Ion Batteries
Oh, S.-M., Myung, S.-T., Hwang, J.-Y., Scrosati, B., Amine, K., & Sun, Y.-K. (2014) · Chemistry of Materials · doi:10.1021/cm502481b · Cited by 237
Keller, M., Buchholz, D., & Passerini, S. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501555 · Cited by 227
Wang, H., Liao, X.-Z., Yang, Y., Yan, X., He, Y.-S., & Ma, Z.-F. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0011605jes · Cited by 185
Copper substituted P2-type Na0.67CuxMn1−xO2: a stable high-power sodium-ion battery cathode
Kang, W., Zhang, Z., Lee, P.-K., Ng, T.-W., Li, W., Tang, Y., Zhang, W., Lee, C.-S., & Wai Yu, D. Y. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta06371j · Cited by 161
Cited by
Recent Progress of Layered Transition Metal Oxide Cathodes for Sodium‐Ion Batteries
Liu, Q., Hu, Z., Chen, M., Zou, C., Jin, H., Wang, S., Chou, S., & Dou, S. (2019) · Small · doi:10.1002/smll.201805381 · Cited by 447
Self-citationElectrochemistry and Solid‐State Chemistry of NaMeO2 (Me = 3d Transition Metals)
Kubota, K., Kumakura, S., Yoda, Y., Kuroki, K., & Komaba, S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703415 · Cited by 399
A 30‐year overview of sodium‐ion batteries
Gao, Y., Zhang, H., Peng, J., Li, L., Xiao, Y., Li, L., Liu, Y., Qiao, Y., & Chou, S. (2024) · Carbon Energy · doi:10.1002/cey2.464 · Cited by 348
Electrode Materials of Sodium-Ion Batteries toward Practical Application
Huang, Y., Zheng, Y., Li, X., Adams, F., Luo, W., Huang, Y., & Hu, L. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b00609 · Cited by 300
Self-citationYang, J., Gao, H., Men, S., Shi, Z., Lin, Z., Kang, X., & Chen, S. (2018) · Advanced Science · doi:10.1002/advs.201800763 · Cited by 299
Metadata
- Authors
- Deng, J., Luo, W., Lu, X., Yao, Q., Wang, Z., Liu, H., Zhou, H., & Dou, S.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2017-10-09
- Volume
- 8
- Issue
- 5
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2762725109
- Cited by
- 305
- References
- 25
- FWCI
- 9.96
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.