3D Porous Cu–Zn Alloys as Alternative Anode Materials for Li‐Ion Batteries with Superior Low T Performance
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Zinc is recently gaining interest in the battery community as potential alternative anode material, because of its large natural abundance and potentially larger volumetric density than graphite. Nevertheless, pure Zn anodes have shown so far very poor cycling performance. Here, the electrochemical performance of Zn‐rich porous Cu–Zn alloys electrodeposited by an environmentally friendly (aqueous) dynamic hydrogen bubble template method is reported. The lithiation/delithiation mechanism is studied in detail by both in situ and ex situ X‐ray diffraction, indicating the reversible displacement of Zn from the Cu–Zn alloy upon reaction with Li. The influence of the alloy composition on the performance of carbon‐ and binder‐free electrodes is also investigated. The optimal Cu:Zn atomic ratio is found to be 18:82, which provides impressive rate capability up to 10 A g−1 (≈30 C), and promising capacity retention upon more than 500 cycles. The high electronic conductivity provided by Cu, and the porous electrode morphology also enable superior lithium storage capability at low temperature. Cu 18 Zn 82 can indeed steadily deliver ≈200 mAh g−1 at −20 °C, whereas an analogous commercial graphite electrode rapidly fades to only 12 mAh g−1.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Porous electrode materials for lithium-ion batteries–how to prepare them and what makes them special
Vu, A., Qian, Y., & Stein, A. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200320 · Cited by 719
Cited by
High-entropy energy materials: challenges and new opportunities
Ma, Y., Ma, Y., Wang, Q., Schweidler, S., Botros, M., Fu, T., Hahn, H., Brezesinski, T., & Breitung, B. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00505g · Cited by 963
Critical Review on Low‐Temperature Li‐Ion/Metal Batteries
Zhang, N., Deng, T., Zhang, S., Wang, C., Chen, L., Wang, C., & Fan, X. (2022) · Advanced Materials · doi:10.1002/adma.202107899 · Cited by 604
High-entropy materials for energy and electronic applications
Schweidler, S., Botros, M., Strauss, F., Wang, Q., Ma, Y., Velasco, L., Cadilha Marques, G., Sarkar, A., Kübel, C., Hahn, H., et al. (2024) · Nature Reviews Materials · doi:10.1038/s41578-024-00654-5 · Cited by 448
Zheng, X., Liu, Z., Sun, J., Luo, R., Xu, K., Si, M., Kang, J., Yuan, Y., Liu, S., Ahmad, T., et al. (2023) · Nature Communications · doi:10.1038/s41467-022-35630-6 · Cited by 332
Challenges and development of lithium-ion batteries for low temperature environments
Piao, N., Gao, X., Yang, H., Guo, Z., Hu, G., Cheng, H.-M., & Li, F. (2022) · eTransportation · doi:10.1016/j.etran.2021.100145 · Cited by 324
Metadata
- Authors
- Varzi, A., Mattarozzi, L., Cattarin, S., Guerriero, P., & Passerini, S.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2017-09-11
- Volume
- 8
- Issue
- 1
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2753414406
- Cited by
- 110
- References
- 1
- FWCI
- 4.25
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: 3D Porous Cu–Zn Alloys as Alternative Anode Materials for Li‐Ion Batteries with Superior Low T Performance. https://app.cochat.ai/papers/10.1002/aenm.201701706
- The paper
- Varzi, A., Mattarozzi, L., Cattarin, S., Guerriero, P., & Passerini, S. (2018). 3D Porous Cu–Zn Alloys as Alternative Anode Materials for Li‐Ion Batteries with Superior Low T Performance. Advanced Energy Materials. https://doi.org/10.1002/aenm.201701706
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.