The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
Ionically Conductive Self‐Healing Binder for Low Cost Si Microparticles Anodes in Li‐Ion Batteries
Abstract
A self‐healing polymer (SHP) with abundant hydrogen bonds, appropriate viscoelasticity, and stretchability is a promising binder to improve cycle performance of Si microparticle anodes in lithium (Li) ion batteries. Besides high capacity and long cycle life, efficient rate performance is strongly desirable for practical Si anode implementation. Here, polyethylene glycol (PEG) groups are incorporated into the SHP, facilitating Li ionic conduction within the binder. The concept of the SHP‐PEG binder involves improving the interface between Si microparticles and electrolytes after cycling based on the combination of self‐healing ability and fast Li ionic conduction. Through the systematic study of mixing PEG Mw and ratio, the polymeric binder combining SHP and PEG with Mw 750 in an optimal ratio of 60:40 (mol%) achieves a high discharging capacity of ≈2600 mA h g−1, reasonable rate performance especially when >1C and maintains 80% of their initial capacity even after ≈150 cycles at 0.5C. The described concept for the polymeric binder, embedding both self‐healing ability and high Li ionic conductivity, should be equally useful for next generation batteries utilizing high capacity materials which suffer from huge volume change during cycling.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Armand, M., & Tarascon, J.-M. (2008) · Nature · doi:10.1038/451652a · Cited by 19,612
Electrical energy storage for the grid: A battery of choices
Dunn, B., Kamath, H., & Tarascon, J.-M. (2011) · Science · doi:10.1126/science.1212741 · Cited by 15,072
The Li-Ion Rechargeable Battery: A Perspective
Goodenough, J. B., & Park, K.-S. (2013) · Journal of the American Chemical Society · doi:10.1021/ja3091438 · Cited by 9,962
High-performance lithium battery anodes using silicon nanowires
Chan, C. K., Peng, H., Liu, G., McIlwrath, K., Zhang, X. F., Huggins, R. A., & Cui, Y. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2007.411 · Cited by 6,683
Self-citationLithium Batteries and Cathode Materials
Whittingham, M. S. (2004) · Chemical Reviews · doi:10.1021/cr020731c · Cited by 6,267
Promise and reality of post-lithium-ion batteries with high energy densities
Choi, J. W., & Aurbach, D. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.13 · Cited by 5,110
A solid future for battery development
Janek, J., & Zeier, W. G. (2016) · Nature Energy · doi:10.1038/nenergy.2016.141 · Cited by 3,979
Self-healing and thermoreversible rubber from supramolecular assembly
Cordier, P., Tournilhac, F., Soulié-Ziakovic, C., & Leibler, L. (2008) · Nature · doi:10.1038/nature06669 · Cited by 2,984
A pomegranate-inspired nanoscale design for large-volume-change lithium battery anodes
Liu, N., Lu, Z., Zhao, J., McDowell, M. T., Lee, H.-W., Zhao, W., & Cui, Y. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.6 · Cited by 2,491
Self-citationWu, H., Chan, G., Choi, J. W., Ryu, I., Yao, Y., McDowell, M. T., Lee, S. W., Jackson, A., Yang, Y., Hu, L., et al. (2012) · Nature Nanotechnology · doi:10.1038/nnano.2012.35 · Cited by 2,478
Self-citationSize-Dependent Fracture of Silicon Nanoparticles During Lithiation
Liu, X. H., Zhong, L., Huang, S., Mao, S. X., Zhu, T., & Huang, J. Y. (2012) · ACS Nano · doi:10.1021/nn204476h · Cited by 2,376
Designing nanostructured Si anodes for high energy lithium ion batteries
Wu, H., & Cui, Y. (2012) · Nano Today · doi:10.1016/j.nantod.2012.08.004 · Cited by 2,350
Self-citationPoly(ethylene oxide)-based electrolytes for lithium-ion batteries
Xue, Z., He, D., & Xie, X. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta03471j · Cited by 2,302
Wu, Z.-S., Ren, W., Xu, L., Li, F., & Cheng, H.-M. (2011) · ACS Nano · doi:10.1021/nn2006249 · Cited by 2,071
Structural Changes in Silicon Anodes during Lithium Insertion/Extraction
Obrovac, M. N., & Christensen, L. (2004) · Electrochemical and Solid-State Letters · doi:10.1149/1.1652421 · Cited by 1,995
A Major Constituent of Brown Algae for Use in High-Capacity Li-Ion Batteries
Kovalenko, I., Zdyrko, B., Magasinski, A., Hertzberg, B., Milicev, Z., Burtovyy, R., Luzinov, I., & Yushin, G. (2011) · Science · doi:10.1126/science.1209150 · Cited by 1,802
Promises and challenges of nanomaterials for lithium-based rechargeable batteries
Sun, Y., Liu, N., & Cui, Y. (2016) · Nature Energy · doi:10.1038/nenergy.2016.71 · Cited by 1,703
Self-citationSize Dependent Fracture of Silicon Nanoparticles during Lithiation.
Huang, J., Liu, X., Zhong, L. S., Huang, S., Mao, S. X., & Zhu, T. (2011) · Nano Letters · Cited by 1,316
Electrical conductivity in ionic complexes of poly(ethylene oxide)
Wright, P. V. (1975) · British Polymer Journal · doi:10.1002/pi.4980070505 · Cited by 1,288
Wang, C., Wu, H., Chen, Z., McDowell, M. T., Cui, Y., & Bao, Z. (2013) · Nature Chemistry · doi:10.1038/nchem.1802 · Cited by 1,269
Self-citationHollow Carbon Nanospheres with Superior Rate Capability for Sodium‐Based Batteries
Tang, K., Fu, L., White, R. J., Yu, L., Titirici, M., Antonietti, M., & Maier, J. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201100691 · Cited by 1,104
Nanostructured anode materials for lithium ion batteries
Roy, P., & Srivastava, S. K. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta04980b · Cited by 813
Electrospun Core–Shell Fibers for Robust Silicon Nanoparticle-Based Lithium Ion Battery Anodes
Hwang, T. H., Lee, Y. M., Kong, B.-S., Seo, J.-S., & Choi, J. W. (2012) · Nano Letters · doi:10.1021/nl203817r · Cited by 658
Ryou, M., Kim, J., Lee, I., Kim, S., Jeong, Y. K., Hong, S., Ryu, J. H., Kim, T., Park, J., Lee, H., et al. (2013) · Advanced Materials · doi:10.1002/adma.201203981 · Cited by 622
Self-citationPolymers with Tailored Electronic Structure for High Capacity Lithium Battery Electrodes
Liu, G., Xun, S., Vukmirovic, N., Song, X., Olalde‐Velasco, P., Zheng, H., Battaglia, V. S., Wang, L., & Yang, W. (2011) · Advanced Materials · doi:10.1002/adma.201102421 · Cited by 576
Son, I. H., Hwan Park, J., Kwon, S., Park, S., Rümmeli, M. H., Bachmatiuk, A., Song, H. J., Ku, J., Choi, J. W., Choi, J.-M., et al. (2015) · Nature Communications · doi:10.1038/ncomms8393 · Cited by 564
Xiao, J., Wang, X., Yang, X., Xun, S., Liu, G., Koech, P. K., Liu, J., & Lemmon, J. P. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201002752 · Cited by 517
Key Parameters Governing the Reversibility of Si/Carbon/CMC Electrodes for Li-Ion Batteries
Bridel, J.-S., Azaïs, T., Morcrette, M., Tarascon, J.-M., & Larcher, D. (2010) · Chemistry of Materials · doi:10.1021/cm902688w · Cited by 499
Chen, S., Shen, L., van Aken, P. A., Maier, J., & Yu, Y. (2017) · Advanced Materials · doi:10.1002/adma.201605650 · Cited by 475
A Robust Ion‐Conductive Biopolymer as a Binder for Si Anodes of Lithium‐Ion Batteries
Liu, J., Zhang, Q., Zhang, T., Li, J., Huang, L., & Sun, S. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201500589 · Cited by 452
In‐Plane Vacancy‐Enabled High‐Power Si–Graphene Composite Electrode for Lithium‐Ion Batteries
Zhao, X., Hayner, C. M., Kung, M. C., & Kung, H. H. (2011) · Advanced Energy Materials · doi:10.1002/aenm.201100426 · Cited by 449
Toward an Ideal Polymer Binder Design for High-Capacity Battery Anodes
Wu, M., Xiao, X., Vukmirovic, N., Xun, S., Das, P. K., Song, X., Olalde-Velasco, P., Wang, D., Weber, A. Z., Wang, L.-W., et al. (2013) · Journal of the American Chemical Society · doi:10.1021/ja4054465 · Cited by 398
Synthesis of Ultrathin Si Nanosheets from Natural Clays for Lithium-Ion Battery Anodes
Ryu, J., Hong, D., Choi, S., & Park, S. (2016) · ACS Nano · doi:10.1021/acsnano.5b07977 · Cited by 334
Agyeman, D. A., Song, K., Lee, G., Park, M., & Kang, Y. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600904 · Cited by 331
Cu‐Si Nanocable Arrays as High‐Rate Anode Materials for Lithium‐Ion Batteries
Cao, F., Deng, J., Xin, S., Ji, H., Schmidt, O. G., Wan, L., & Guo, Y. (2011) · Advanced Materials · doi:10.1002/adma.201102062 · Cited by 301
Chen, Z., Wang, C., Lopez, J., Lu, Z., Cui, Y., & Bao, Z. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401826 · Cited by 270
Self-citationPark, S.-J., Zhao, H., Ai, G., Wang, C., Song, X., Yuca, N., Battaglia, V. S., Yang, W., & Liu, G. (2015) · Journal of the American Chemical Society · doi:10.1021/ja511181p · Cited by 243
Sun, Y., Lopez, J., Lee, H., Liu, N., Zheng, G., Wu, C., Sun, J., Liu, W., Chung, J. W., Bao, Z., et al. (2016) · Advanced Materials · doi:10.1002/adma.201504723 · Cited by 231
Self-citationA case study on fibrous porous SnO2 anode for robust, high-capacity lithium-ion batteries
Hwang, S. M., Lim, Y.-G., Kim, J.-G., Heo, Y.-U., Lim, J. H., Yamauchi, Y., Park, M.-S., Kim, Y.-J., Dou, S. X., & Kim, J. H. (2014) · Nano Energy · doi:10.1016/j.nanoen.2014.08.020 · Cited by 195
Kwon, T., Jeong, Y. K., Lee, I., Kim, T., Choi, J. W., & Coskun, A. (2014) · Advanced Materials · doi:10.1002/adma.201402950 · Cited by 184
Lopez, J., Chen, Z., Wang, C., et al. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b11363 · Cited by 110
Self-citationA Fast Rechargeable Lithium-Ion Battery at Subfreezing Temperatures
Wang, C., Xu, T., Ge, S., Zhang, G., Yang, X., & Ji, Y. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0681609jes · Cited by 92
Li, C., Shi, T., Yoshitake, H., & Wang, H. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta05650d · Cited by 64
Cited by
Guidelines and trends for next-generation rechargeable lithium and lithium-ion batteries
Wu, F., Maier, J., & Yu, Y. (2020) · Chemical Society Reviews · doi:10.1039/c7cs00863e · Cited by 2,229
Tailoring inorganic–polymer composites for the mass production of solid-state batteries
Fan, L.-Z., He, H., & Nan, C.-W. (2021) · Nature Reviews Materials · doi:10.1038/s41578-021-00320-0 · Cited by 1,034
Designing polymers for advanced battery chemistries
Lopez, J., Mackanic, D. G., Cui, Y., & Bao, Z. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0103-6 · Cited by 894
Self-citationHigh‐Performance Polymeric Materials through Hydrogen‐Bond Cross‐Linking
Song, P., & Wang, H. (2020) · Advanced Materials · doi:10.1002/adma.201901244 · Cited by 614
Intrinsically Self-Healing Polymers: From Mechanistic Insight to Current Challenges
Li, B., Cao, P.-F., Saito, T., & Sokolov, A. P. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00575 · Cited by 571
Metadata
- Authors
- Munaoka, T., Yan, X., Lopez, J., To, J. W. F., Park, J., Tok, J. B. ‐., Cui, Y., & Bao, Z.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2018-02-12
- Volume
- 8
- Issue
- 14
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2791407295
- Cited by
- 322
- References
- 44
- FWCI
- 12.32
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.