The DOI matches its Crossref record; 54 of the 54 references it cites were found in a registry or an index.
3D–2D–0D Interface Profiling for Record Efficiency All‐Inorganic CsPbBrI2 Perovskite Solar Cells with Superior Stability
Open accessAbstract
All‐inorganic CsPbBrI 2 perovskite has great advantages in terms of ambient phase stability and suitable band gap (1.91 eV) for photovoltaic applications. However, the typically used structure causes reduced device performance, primarily due to the large recombination at the interface between the perovskite, and the hole‐extraction layer (HEL). In this paper, an efficient CsPbBrI 2 perovskite solar cell (PSC) with a dimensionally graded heterojunction is reported, in which the CsPbBrI 2 material is distributed within bulk–nanosheet–quantum dots or 3D–2D–0D dimension‐profiled interface structure so that the energy alignment is optimized in between the valence and conduction bands of both CsPbBrI 2 and the HEL layers. Specifically, the valence‐/conduction‐band edge is leveraged to bend with synergistic advantages: the graded combination enhances the hole extraction and conduction efficiency with effectively decreased recombination loss during the hole‐transfer process, leading to an enhanced built‐in electric field, hence a high VOC of as much as 1.19 V. The profiled structure induces continuously upshifted energy levels, resulting in a higher JSC of as much as 12.93 mA cm−2 and fill factor as high as 80.5%, and therefore record power conversion efficiency (PCE) of 12.39%. As far as it is known, this is the highest PCE for CsPbBrI 2 perovskite‐based PSC.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Iodide management in formamidinium-lead-halide–based perovskite layers for efficient solar cells
Yang, W. S., Park, B.-W., Jung, E. H., Jeon, N. J., Kim, Y. C., Lee, D. U., Shin, S. S., Seo, J., Kim, E. K., Noh, J. H., et al. (2017) · Science · doi:10.1126/science.aan2301 · Cited by 5,445
Quantum dot–induced phase stabilization of α-CsPbI 3 perovskite for high-efficiency photovoltaics
Swarnkar, A., Marshall, A. R., Sanehira, E. M., Chernomordik, B. D., Moore, D. T., Christians, J. A., Chakrabarti, T., & Luther, J. M. (2016) · Science · doi:10.1126/science.aag2700 · Cited by 2,794
Intrinsic Thermal Instability of Methylammonium Lead Trihalide Perovskite
Conings, B., Drijkoningen, J., Gauquelin, N., Babayigit, A., D'Haen, J., D'Olieslaeger, L., Ethirajan, A., Verbeeck, J., Manca, J., Mosconi, E., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500477 · Cited by 2,234
Zheng, X., Chen, B., Dai, J., Fang, Y., Bai, Y., Lin, Y., Wei, H., Zeng, X. C., & Huang, J. (2017) · Nature Energy · doi:10.1038/nenergy.2017.102 · Cited by 2,154
Bi, D., Yi, C., Luo, J., Décoppet, J.-D., Zhang, F., Zakeeruddin, S. M., Li, X., Hagfeldt, A., & Grätzel, M. (2016) · Nature Energy · doi:10.1038/nenergy.2016.142 · Cited by 2,037
Inorganic caesium lead iodide perovskite solar cells
Eperon, G. E., Paternò, G. M., Sutton, R. J., Zampetti, A., Haghighirad, A. A., Cacialli, F., & Snaith, H. J. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta06398a · Cited by 1,852
Improved performance and stability in quantum dot solar cells through band alignment engineering
Chuang, C.-H. M., Brown, P. R., Bulović, V., & Bawendi, M. G. (2014) · Nature Materials · doi:10.1038/nmat3984 · Cited by 1,795
Bandgap‐Tunable Cesium Lead Halide Perovskites with High Thermal Stability for Efficient Solar Cells
Sutton, R. J., Eperon, G. E., Miranda, L., Parrott, E. S., Kamino, B. A., Patel, J. B., Hörantner, M. T., Johnston, M. B., Haghighirad, A. A., Moore, D. T., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502458 · Cited by 1,571
Wang, Z., Lin, Q., Chmiel, F. P., Sakai, N., Herz, L. M., & Snaith, H. J. (2017) · Nature Energy · doi:10.1038/nenergy.2017.135 · Cited by 1,409
Tress, W., Marinova, N., Moehl, T., Zakeeruddin, S. M., Nazeeruddin, M. K., & Grätzel, M. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03664f · Cited by 1,381
Cited by
Perovskite precursor solution chemistry: from fundamentals to photovoltaic applications
Jung, M., Ji, S.-G., Kim, G., & Seok, S. I. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00656c · Cited by 816
Causes and Solutions of Recombination in Perovskite Solar Cells
Chen, J., & Park, N. (2019) · Advanced Materials · doi:10.1002/adma.201803019 · Cited by 733
Understanding of perovskite crystal growth and film formation in scalable deposition processes
Liu, C., Cheng, Y.-B., & Ge, Z. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00711c · Cited by 675
Progress of Lead‐Free Halide Double Perovskites
Igbari, F., Wang, Z., & Liao, L. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803150 · Cited by 562
Recent progress of inorganic perovskite solar cells
Tai, Q., Tang, K.-C., & Yan, F. (2019) · Energy & Environmental Science · doi:10.1039/c9ee01479a · Cited by 528
Materials and Methods for Interface Engineering toward Stable and Efficient Perovskite Solar Cells
Chen, J., & Park, N.-G. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c01240 · Cited by 521
Review on Recent Progress of All‐Inorganic Metal Halide Perovskites and Solar Cells
Xiang, W., & Tress, W. (2019) · Advanced Materials · doi:10.1002/adma.201902851 · Cited by 454
The high open-circuit voltage of perovskite solar cells: a review
Guo, Z., Jena, A. K., Kim, G. M., & Miyasaka, T. (2022) · Energy & Environmental Science · doi:10.1039/d2ee00663d · Cited by 430
Interface Engineering for All‐Inorganic CsPbI2Br Perovskite Solar Cells with Efficiency over 14%
Yan, L., Xue, Q., Liu, M., Zhu, Z., Tian, J., Li, Z., Chen, Z., Chen, Z., Yan, H., Yip, H., et al. (2018) · Advanced Materials · doi:10.1002/adma.201802509 · Cited by 404
Dual Interfacial Design for Efficient CsPbI2Br Perovskite Solar Cells with Improved Photostability
Tian, J., Xue, Q., Tang, X., Chen, Y., Li, N., Hu, Z., Shi, T., Wang, X., Huang, F., Brabec, C. J., et al. (2019) · Advanced Materials · doi:10.1002/adma.201901152 · Cited by 398
Halide perovskites for high-performance X-ray detector
Li, Z., Zhou, F., Yao, H., Ci, Z., Yang, Z., & Jin, Z. (2021) · Materials Today · doi:10.1016/j.mattod.2021.01.028 · Cited by 370
Self-citationControlled n‐Doping in Air‐Stable CsPbI2Br Perovskite Solar Cells with a Record Efficiency of 16.79%
Han, Y., Zhao, H., Duan, C., Yang, S., Yang, Z., Liu, Z., & Liu, S. (. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909972 · Cited by 367
Self-citationGraded Bandgap CsPbI2+Br1− Perovskite Solar Cells with a Stabilized Efficiency of 14.4%
Bian, H., Bai, D., Jin, Z., Wang, K., Liang, L., Wang, H., Zhang, J., Wang, Q., & Liu, S. (. (2018) · Joule · doi:10.1016/j.joule.2018.04.012 · Cited by 366
Self-citationEfficient α-CsPbI3 Photovoltaics with Surface Terminated Organic Cations
Wang, Y., Zhang, T., Kan, M., Li, Y., Wang, T., & Zhao, Y. (2018) · Joule · doi:10.1016/j.joule.2018.06.013 · Cited by 348
Precursor Engineering for All‐Inorganic CsPbI2Br Perovskite Solar Cells with 14.78% Efficiency
Yin, G., Zhao, H., Jiang, H., Yuan, S., Niu, T., Zhao, K., Liu, Z., & Liu, S. (. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201803269 · Cited by 330
Self-citationHalide Perovskite, a Potential Scintillator for X‐Ray Detection
Zhou, F., Li, Z., Lan, W., Wang, Q., Ding, L., & Jin, Z. (2020) · Small Methods · doi:10.1002/smtd.202000506 · Cited by 292
Self-citationStability of all-inorganic perovskite solar cells
Ouedraogo, N. A. N., Chen, Y., Xiao, Y. Y., Meng, Q., Han, C. B., Yan, H., & Zhang, Y. (2020) · Nano Energy · doi:10.1016/j.nanoen.2019.104249 · Cited by 291
Self‐Repairing Tin‐Based Perovskite Solar Cells with a Breakthrough Efficiency Over 11%
Wang, C., Gu, F., Zhao, Z., Rao, H., Qiu, Y., Cai, Z., Zhan, G., Li, X., Sun, B., Yu, X., et al. (2020) · Advanced Materials · doi:10.1002/adma.201907623 · Cited by 287
Wu, T., Wang, Y., Dai, Z., Cui, D., Wang, T., Meng, X., Bi, E., Yang, X., & Han, L. (2019) · Advanced Materials · doi:10.1002/adma.201900605 · Cited by 257
Faheem, M. B., Khan, B., Feng, C., Farooq, M. U., Raziq, F., Xiao, Y., & Li, Y. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.9b02338 · Cited by 254
Review on recent progress of lead-free halide perovskites in optoelectronic applications
Li, J., Duan, J., Yang, X., Duan, Y., Yang, P., & Tang, Q. (2021) · Nano Energy · doi:10.1016/j.nanoen.2020.105526 · Cited by 254
Mundt, L. E., & Schelhas, L. T. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903074 · Cited by 58
Metadata
- Authors
- Zhang, J., Bai, D., Jin, Z., Bian, H., Wang, K., Sun, J., Wang, Q., & Liu, S. (.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2018-01-24
- Volume
- 8
- Issue
- 15
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2789425555
- Cited by
- 338
- References
- 54
- FWCI
- 23.71
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.