The DOI matches its Crossref record; 60 of the 60 references it cites were found in a registry or an index.
3D Wettable Framework for Dendrite‐Free Alkali Metal Anodes
Open accessAbstract
The infinite volume change and dendritic behavior in alkali metal anodes lead to low Coulombic efficiency and short‐circuit issues that significantly hamper renewed efforts at commercialization. Here, a dendrite‐free alkali metal anode, made by thermally preloading molten Li or Na into a 3D framework with high alkali wettability, is reported. In the mechanically robust 3D framework, carbon fiber (CF) serves as an electrical highway that provides fast charge transfer for the redox reaction. Through a facile solution‐based process, a SnO 2 coating is introduced to modify the poor wetting behavior of the carbon framework and drastically improve both the electrochemical performance and reliability. The kinetic barrier to adhesion of molten alkali metals on the CF framework is eliminated by the mixed reaction with SnO 2. The growth of dendrites is effectively repressed under the decreased local current density of the 3D framework. In full‐cell configurations with LiFePO 4 cathodes, the Li–CF electrode shows reduced polarization and 90% capacity retention after 500 cycles in traditional carbonate electrolyte. Comparable improvements are also observed in 3D electrodes for Na metal batteries. These findings on a stable 3D carbon framework with improved wetting behavior provide significant practical implications for achieving safe and commercially viable alkali metal anodes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Armand, M., & Tarascon, J.-M. (2008) · Nature · doi:10.1038/451652a · Cited by 19,612
Electrical energy storage for the grid: A battery of choices
Dunn, B., Kamath, H., & Tarascon, J.-M. (2011) · Science · doi:10.1126/science.1212741 · Cited by 15,072
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Research Development on Sodium-Ion Batteries
Yabuuchi, N., Kubota, K., Dahbi, M., & Komaba, S. (2014) · Chemical Reviews · doi:10.1021/cr500192f · Cited by 6,478
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Lithium metal anodes for rechargeable batteries
Xu, W., Wang, J., Ding, F., Chen, X., Nasybulin, E., Zhang, Y., & Zhang, J.-G. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee40795k · Cited by 4,704
Self-citationRoom-temperature stationary sodium-ion batteries for large-scale electric energy storage
Pan, H., Hu, Y.-S., & Chen, L. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40847g · Cited by 3,319
High rate and stable cycling of lithium metal anode
Qian, J., Henderson, W. A., Xu, W., Bhattacharya, P., Engelhard, M., Borodin, O., & Zhang, J.-G. (2015) · Nature Communications · doi:10.1038/ncomms7362 · Cited by 2,561
Nanostructured Materials for Electrochemical Energy Conversion and Storage Devices
Guo, Y., Hu, J., & Wan, L. (2008) · Advanced Materials · doi:10.1002/adma.200800627 · Cited by 2,223
Cited by
Thick Electrode Batteries: Principles, Opportunities, and Challenges
Kuang, Y., Chen, C., Kirsch, D., & Hu, L. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201901457 · Cited by 842
Self-citationTowards better Li metal anodes: Challenges and strategies
Zhang, Y., Zuo, T.-T., Popovic, J., Lim, K., Yin, Y.-X., Maier, J., & Guo, Y.-G. (2020) · Materials Today · doi:10.1016/j.mattod.2019.09.018 · Cited by 653
Self-citationCarbon-Based Fibers for Advanced Electrochemical Energy Storage Devices
Chen, S., Qiu, L., & Cheng, H.-M. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00466 · Cited by 555
Du, H., Wang, Y., Kang, Y., Zhao, Y., Tian, Y., Wang, X., Tan, Y., Liang, Z., Wozny, J., Li, T., et al. (2024) · Advanced Materials · doi:10.1002/adma.202401482 · Cited by 376
Design Strategies to Enable the Efficient Use of Sodium Metal Anodes in High‐Energy Batteries
Sun, B., Xiong, P., Maitra, U., Langsdorf, D., Yan, K., Wang, C., Janek, J., Schröder, D., & Wang, G. (2020) · Advanced Materials · doi:10.1002/adma.201903891 · Cited by 355
Self-citationA High‐Performance Monolithic Solid‐State Sodium Battery with Ca2+ Doped Na3Zr2Si2PO12 Electrolyte
Lu, Y., Alonso, J. A., Yi, Q., Lu, L., Wang, Z. L., & Sun, C. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201901205 · Cited by 319
How to avoid dendrite formation in metal batteries: Innovative strategies for dendrite suppression
Aslam, M. K., Niu, Y., Hussain, T., Tabassum, H., Tang, W., Xu, M., & Ahuja, R. (2021) · Nano Energy · doi:10.1016/j.nanoen.2021.106142 · Cited by 308
Advances in the Design of 3D‐Structured Electrode Materials for Lithium‐Metal Anodes
Park, S., Jin, H., & Yun, Y. S. (2020) · Advanced Materials · doi:10.1002/adma.202002193 · Cited by 301
Plating/Stripping Behavior of Actual Lithium Metal Anode
Liu, H., Cheng, X., Xu, R., Zhang, X., Yan, C., Huang, J., & Zhang, Q. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201902254 · Cited by 260
Metadata
- Authors
- Zhang, Y., Wang, C., Pastel, G., Kuang, Y., Xie, H., Li, Y., Liu, B., Luo, W., Chen, C., & Hu, L.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2018-05-09
- Volume
- 8
- Issue
- 18
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2802591433
- Cited by
- 265
- References
- 60
- FWCI
- 14.39
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.