The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Lignin Laser Lithography: A Direct‐Write Method for Fabricating 3D Graphene Electrodes for Microsupercapacitors
Abstract
In this work, a simple lignin‐based laser lithography technique is developed and used to fabricate on‐chip microsupercapacitors (MSCs) using 3D graphene electrodes. Specifically, lignin films are transformed directly into 3D laser‐scribed graphene (LSG) electrodes by a simple one‐step CO 2 laser irradiation. This step is followed by a water lift‐off process to remove unexposed lignin, resulting in 3D graphene with the designed electrode patterns. The resulting LSG electrodes are hierarchically porous, electrically conductive (conductivity is up to 66.2 S cm−1), and have a high specific surface area (338.3 m 2 g−1). These characteristics mean that such electrodes can be used directly as MSC electrodes without the need for binders and current collectors. The MSCs fabricated using lignin laser lithography exhibit good electrochemical performances, namely, high areal capacitance (25.1 mF cm−2), high volumetric energy density (≈1 mWh cm−3), and high volumetric power density (≈2 W cm−3). The versatility of lignin laser lithography opens up the opportunity in applications such as on‐chip microsupercapacitors, sensors, and flexible electronics at large‐scale production.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Xu, X., Zhou, J., Nagaraju, D. H., Jiang, L., Marinov, V. R., Lubineau, G., Alshareef, H. N., & Oh, M. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201500538 · Cited by 324
Self-citation
Cited by
Laser Fabrication of Graphene‐Based Flexible Electronics
You, R., Liu, Y., Hao, Y., Han, D., Zhang, Y., & You, Z. (2020) · Advanced Materials · doi:10.1002/adma.201901981 · Cited by 542
Wearable piezoresistive pressure sensors based on 3D graphene
Cao, M., Su, J., Fan, S., Qiu, H., Su, D., & Li, L. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.126777 · Cited by 373
Vivaldi, F. M., Dallinger, A., Bonini, A., Poma, N., Sembranti, L., Biagini, D., Salvo, P., Greco, F., & Di Francesco, F. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c05614 · Cited by 364
Graphitic Nanocarbon with Engineered Defects for High‐Performance Potassium‐Ion Battery Anodes
Zhang, W., Ming, J., Zhao, W., Dong, X., Hedhili, M. N., Costa, P. M. F. J., & Alshareef, H. N. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201903641 · Cited by 317
Self-citationWang, H.-M., Yuan, T.-Q., Song, G.-Y., & Sun, R.-C. (2021) · Green Chemistry · doi:10.1039/d1gc00790d · Cited by 292
Metadata
- Authors
- Zhang, W., Lei, Y., Ming, F., Jiang, Q., Costa, P. M. F. J., & Alshareef, H. N.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2018-08-09
- Volume
- 8
- Issue
- 27
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2886272324
- Cited by
- 269
- References
- 1
- FWCI
- 6.85
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Lignin Laser Lithography: A Direct‐Write Method for Fabricating 3D Graphene Electrodes for Microsupercapacitors. https://app.cochat.ai/papers/10.1002/aenm.201801840
- The paper
- Zhang, W., Lei, Y., Ming, F., Jiang, Q., Costa, P. M. F. J., & Alshareef, H. N. (2018). Lignin Laser Lithography: A Direct‐Write Method for Fabricating 3D Graphene Electrodes for Microsupercapacitors. Advanced Energy Materials. https://doi.org/10.1002/aenm.201801840
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.