The DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
Lignin Laser Lithography: A Direct‐Write Method for Fabricating 3D Graphene Electrodes for Microsupercapacitors
Abstract
In this work, a simple lignin‐based laser lithography technique is developed and used to fabricate on‐chip microsupercapacitors (MSCs) using 3D graphene electrodes. Specifically, lignin films are transformed directly into 3D laser‐scribed graphene (LSG) electrodes by a simple one‐step CO 2 laser irradiation. This step is followed by a water lift‐off process to remove unexposed lignin, resulting in 3D graphene with the designed electrode patterns. The resulting LSG electrodes are hierarchically porous, electrically conductive (conductivity is up to 66.2 S cm−1), and have a high specific surface area (338.3 m 2 g−1). These characteristics mean that such electrodes can be used directly as MSC electrodes without the need for binders and current collectors. The MSCs fabricated using lignin laser lithography exhibit good electrochemical performances, namely, high areal capacitance (25.1 mF cm−2), high volumetric energy density (≈1 mWh cm−3), and high volumetric power density (≈2 W cm−3). The versatility of lignin laser lithography opens up the opportunity in applications such as on‐chip microsupercapacitors, sensors, and flexible electronics at large‐scale production.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Raman Spectrum of Graphene and Graphene Layers
Ferrari, A. C., Meyer, J. C., Scardaci, V., Casiraghi, C., Lazzeri, M., Mauri, F., Piscanec, S., Jiang, D., Novoselov, K. S., Roth, S., et al. (2006) · Physical Review Letters · doi:10.1103/physrevlett.97.187401 · Cited by 15,047
Lignin Valorization: Improving Lignin Processing in the Biorefinery
Ragauskas, A. J., Beckham, G. T., Biddy, M. J., Chandra, R., Chen, F., Davis, M. F., Davison, B. H., Dixon, R. A., Gilna, P., Keller, M., et al. (2014) · Science · doi:10.1126/science.1246843 · Cited by 4,125
Laser Scribing of High-Performance and Flexible Graphene-Based Electrochemical Capacitors
El-Kady, M. F., Strong, V., Dubin, S., & Kaner, R. B. (2012) · Science · doi:10.1126/science.1216744 · Cited by 4,008
Laser-induced porous graphene films from commercial polymers
Lin, J., Peng, Z., Liu, Y., Ruiz-Zepeda, F., Ye, R., Samuel, E. L. G., Yacaman, M. J., Yakobson, B. I., & Tour, J. M. (2014) · Nature Communications · doi:10.1038/ncomms6714 · Cited by 2,946
Ultrahigh-power micrometre-sized supercapacitors based on onion-like carbon
Pech, D., Brunet, M., Durou, H., Huang, P., Mochalin, V., Gogotsi, Y., Taberna, P.-L., & Simon, P. (2010) · Nature Nanotechnology · doi:10.1038/nnano.2010.162 · Cited by 2,721
Direct laser writing of micro-supercapacitors on hydrated graphite oxide films
Gao, W., Singh, N., Song, L., Liu, Z., Reddy, A. L. M., Ci, L., Vajtai, R., Zhang, Q., Wei, B., & Ajayan, P. M. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2011.110 · Cited by 1,461
Lignin Depolymerization and Conversion: A Review of Thermochemical Methods
Pandey, M. P., & Kim, C. S. (2011) · Chemical Engineering & Technology · doi:10.1002/ceat.201000270 · Cited by 1,419
Beidaghi, M., & Gogotsi, Y. (2014) · Energy & Environmental Science · doi:10.1039/c3ee43526a · Cited by 1,293
Laser-Induced Graphene by Multiple Lasing: Toward Electronics on Cloth, Paper, and Food
Chyan, Y., Ye, R., Li, Y., Singh, S. P., Arnusch, C. J., & Tour, J. M. (2018) · ACS Nano · doi:10.1021/acsnano.7b08539 · Cited by 1,033
Microsupercapacitors as miniaturized energy-storage components for on-chip electronics
Kyeremateng, N. A., Brousse, T., & Pech, D. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2016.196 · Cited by 984
Flexible Boron-Doped Laser-Induced Graphene Microsupercapacitors
Peng, Z., Ye, R., Mann, J. A., Zakhidov, D., Li, Y., Smalley, P. R., Lin, J., & Tour, J. M. (2015) · ACS Nano · doi:10.1021/acsnano.5b00436 · Cited by 712
Laser‐Induced Graphene Formation on Wood
Ye, R., Chyan, Y., Zhang, J., Li, Y., Han, X., Kittrell, C., & Tour, J. M. (2017) · Advanced Materials · doi:10.1002/adma.201702211 · Cited by 665
High‐Performance Pseudocapacitive Microsupercapacitors from Laser‐Induced Graphene
Li, L., Zhang, J., Peng, Z., Li, Y., Gao, C., Ji, Y., Ye, R., Kim, N. D., Zhong, Q., Yang, Y., et al. (2016) · Advanced Materials · doi:10.1002/adma.201503333 · Cited by 571
An intelligent artificial throat with sound-sensing ability based on laser induced graphene
Tao, L.-Q., Tian, H., Liu, Y., Ju, Z.-Y., Pang, Y., Chen, Y.-Q., Wang, D.-Y., Tian, X.-G., Yan, J.-C., Deng, N.-Q., et al. (2017) · Nature Communications · doi:10.1038/ncomms14579 · Cited by 558
Duy, L. X., Peng, Z., Li, Y., Zhang, J., Ji, Y., & Tour, J. M. (2018) · Carbon · doi:10.1016/j.carbon.2017.10.036 · Cited by 503
MXene‐on‐Paper Coplanar Microsupercapacitors
Kurra, N., Ahmed, B., Gogotsi, Y., & Alshareef, H. N. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201601372 · Cited by 480
Self-citationElaboration of a microstructured inkjet-printed carbon electrochemical capacitor
Pech, D., Brunet, M., Taberna, P.-L., Simon, P., Fabre, N., Mesnilgrente, F., Conédéra, V., & Durou, H. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.08.085 · Cited by 477
Flexible and Stackable Laser-Induced Graphene Supercapacitors
Peng, Z., Lin, J., Ye, R., Samuel, E. L. G., & Tour, J. M. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am509065d · Cited by 470
A superior low-cost amorphous carbon anode made from pitch and lignin for sodium-ion batteries
Li, Y., Hu, Y., Li, H., Chen, L., & Huang, X. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta08601a · Cited by 447
Liu, Z., Wu, Z., Yang, S., Dong, R., Feng, X., & Müllen, K. (2016) · Advanced Materials · doi:10.1002/adma.201505304 · Cited by 411
Laser‐Induced Graphene in Controlled Atmospheres: From Superhydrophilic to Superhydrophobic Surfaces
Li, Y., Luong, D. X., Zhang, J., Tarkunde, Y. R., Kittrell, C., Sargunaraj, F., Ji, Y., Arnusch, C. J., & Tour, J. M. (2017) · Advanced Materials · doi:10.1002/adma.201700496 · Cited by 405
A Simple Route to Porous Graphene from Carbon Nanodots for Supercapacitor Applications
Strauss, V., Marsh, K., Kowal, M. D., El‐Kady, M., & Kaner, R. B. (2018) · Advanced Materials · doi:10.1002/adma.201704449 · Cited by 386
Sulfur-Doped Laser-Induced Porous Graphene Derived from Polysulfone-Class Polymers and Membranes
Singh, S. P., Li, Y., Zhang, J., Tour, J. M., & Arnusch, C. J. (2018) · ACS Nano · doi:10.1021/acsnano.7b06263 · Cited by 347
Xu, X., Zhou, J., Nagaraju, D. H., Jiang, L., Marinov, V. R., Lubineau, G., Alshareef, H. N., & Oh, M. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201500538 · Cited by 324
Self-citationIn situ MoS2 Decoration of Laser-Induced Graphene as Flexible Supercapacitor Electrodes
Clerici, F., Fontana, M., Bianco, S., Serrapede, M., Perrucci, F., Ferrero, S., Tresso, E., & Lamberti, A. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b00808 · Cited by 297
Luo, S., Hoang, P. T., & Liu, T. (2016) · Carbon · doi:10.1016/j.carbon.2015.09.076 · Cited by 295
Highly Efficient Laser Scribed Graphene Electrodes for On‐Chip Electrochemical Sensing Applications
Nayak, P., Kurra, N., Xia, C., & Alshareef, H. N. (2016) · Advanced Electronic Materials · doi:10.1002/aelm.201600185 · Cited by 293
Self-citationIn Situ Formation of Metal Oxide Nanocrystals Embedded in Laser-Induced Graphene
Ye, R., Peng, Z., Wang, T., Xu, Y., Zhang, J., Li, Y., Nilewski, L. G., Lin, J., & Tour, J. M. (2015) · ACS Nano · doi:10.1021/acsnano.5b04138 · Cited by 288
Lamberti, A., Clerici, F., Fontana, M., & Scaltrito, L. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600050 · Cited by 283
Zhang, W., Lin, H., Lin, Z., Yin, J., Lu, H., Liu, D., & Zhao, M. (2015) · ChemSusChem · doi:10.1002/cssc.201403486 · Cited by 280
Self-citationHwang, J. Y., Li, M., El‐Kady, M. F., & Kaner, R. B. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201605745 · Cited by 278
Large-Area Deposition of MoS2 by Pulsed Laser Deposition with In Situ Thickness Control
Serna, M. I., Yoo, S. H., Moreno, S., Xi, Y., Oviedo, J. P., Choi, H., Alshareef, H. N., Kim, M. J., Minary-Jolandan, M., & Quevedo-Lopez, M. A. (2016) · ACS Nano · doi:10.1021/acsnano.6b01636 · Cited by 245
Self-citationWearable Textile‐Based In‐Plane Microsupercapacitors
Pu, X., Liu, M., Li, L., Han, S., Li, X., Jiang, C., Du, C., Luo, J., Hu, W., & Wang, Z. L. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201601254 · Cited by 235
CoO nanoflowers woven by CNT network for high energy density flexible micro-supercapacitor
Zhu, Y. G., Wang, Y., Shi, Y., Wong, J. I., & Yang, H. Y. (2014) · Nano Energy · doi:10.1016/j.nanoen.2013.10.006 · Cited by 209
Inkjet printed highly transparent and flexible graphene micro-supercapacitors
Sollami Delekta, S., Smith, A. D., Li, J., & Östling, M. (2017) · Nanoscale · doi:10.1039/c7nr02204b · Cited by 171
Yeo, J., Kim, G., Hong, S., Kim, M. S., Kim, D., Lee, J., Lee, H., Kwon, J., Suh, Y. D., Kang, H. W., et al. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.08.012 · Cited by 155
Efficient Water-Splitting Electrodes Based on Laser-Induced Graphene
Zhang, J., Zhang, C., Sha, J., Fei, H., Li, Y., & Tour, J. M. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b06727 · Cited by 152
Flexible planar concentric circular micro-supercapacitor arrays for wearable gas sensing application
Li, L., Fu, C., Lou, Z., Chen, S., Han, W., Jiang, K., Chen, D., & Shen, G. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.08.060 · Cited by 136
A general strategy for the fabrication of high performance microsupercapacitors
Kurra, N., Jiang, Q. M., & Alshareef, H. N. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.05.031 · Cited by 88
Self-citationYadav, P., Basu, A., Suryawanshi, A., Game, O. S., & Ogale, S. (2016) · Advanced Materials Interfaces · doi:10.1002/admi.201600057 · Cited by 78
Nayak, P., Jiang, Q. M., Kurra, N., Wang, X., Buttner, U., & Alshareef, H. N. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta06236b · Cited by 57
Self-citation
Cited by
Synthesis Strategies of Porous Carbon for Supercapacitor Applications
Yin, J., Zhang, W., Alhebshi, N. A., Salah, N., & Alshareef, H. N. (2020) · Small Methods · doi:10.1002/smtd.201900853 · Cited by 671
Self-citationLaser Fabrication of Graphene‐Based Flexible Electronics
You, R., Liu, Y., Hao, Y., Han, D., Zhang, Y., & You, Z. (2020) · Advanced Materials · doi:10.1002/adma.201901981 · Cited by 542
Le, T. D., Phan, H., Kwon, S., Park, S., Jung, Y., Min, J., Chun, B. J., Yoon, H., Ko, S. H., Kim, S., et al. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202205158 · Cited by 433
Sodium-ion battery anodes: Status and future trends
Zhang, W., Zhang, F., Ming, F., & Alshareef, H. N. (2019) · EnergyChem · doi:10.1016/j.enchem.2019.100012 · Cited by 407
Self-citationWearable piezoresistive pressure sensors based on 3D graphene
Cao, M., Su, J., Fan, S., Qiu, H., Su, D., & Li, L. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.126777 · Cited by 373
Metadata
- Authors
- Zhang, W., Lei, Y., Ming, F., Jiang, Q., Costa, P. M. F. J., & Alshareef, H. N.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2018-08-09
- Volume
- 8
- Issue
- 27
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2886272324
- Cited by
- 269
- References
- 41
- FWCI
- 6.85
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.