The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
Entropy Engineering of SnTe: Multi‐Principal‐Element Alloying Leading to Ultralow Lattice Thermal Conductivity and State‐of‐the‐Art Thermoelectric Performance
Abstract
The core effects of high entropy alloys distinguish high entropy alloying from ordinary multielement doping, allowing for a synergy of band structure and microstructure engineering. Here, a systematic synthesis, structural, theoretical, and thermoelectric study of multi‐principal‐element‐alloyed SnTe is reported. Toward high thermoelectric performance, the entropy of mixing needs to be high enough to make good use of the core effects, yet low enough to minimize the degradation of carrier mobility. It is demonstrated that high entropy of mixing extends the solubility limit of Mn while retaining the lattice symmetry, the enhanced Mn content elicits multiscale microstructures. The resulting ultralow lattice thermal conductivity of ≈0.32 W m−1 K−1 at 900 K in (Sn 0.7 Ge 0.2 Pb 0.1)0.75 Mn 0.275 Te is not only lower than the amorphous limit of SnTe but also comparable to those thermoelectric materials with complex crystal structures and strong anharmonicity. Co‐alloying of (Sn,Ge,Pb,Mn) also enhances band convergence and band effective mass, yielding good power factors. Further tuning of the Sn excess yields a state‐of‐the‐art zT ≈1.42 at 900 K in (Sn 0.74 Ge 0.2 Pb 0.1)0.75 Mn 0.275 Te. In view of the simple face‐centered‐cubic structure of SnTe‐based alloys, these results attest to the efficacy of entropy engineering toward a new paradigm of high entropy thermoelecrics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Microstructures and properties of high-entropy alloys
Zhang, Y., Zuo, T. T., Tang, Z., Gao, M. C., Dahmen, K. A., Liaw, P. K., & Lu, Z. P. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2013.10.001 · Cited by 7,128
Self-citationCRC Handbook of Thermoelectrics
(2018) · CRC Press eBooks · doi:10.1201/9781420049718 · Cited by 5,787
Ultralow thermal conductivity and high thermoelectric figure of merit in SnSe crystals
Zhao, L.-D., Lo, S.-H., Zhang, Y., Sun, H., Tan, G., Uher, C., Wolverton, C., Dravid, V. P., & Kanatzidis, M. G. (2014) · Nature · doi:10.1038/nature13184 · Cited by 5,218
Self-citationHigh-performance bulk thermoelectrics with all-scale hierarchical architectures
Biswas, K., He, J., Blum, I. D., Wu, C.-I., Hogan, T. P., Seidman, D. N., Dravid, V. P., & Kanatzidis, M. G. (2012) · Nature · doi:10.1038/nature11439 · Cited by 4,740
Self-citationConvergence of electronic bands for high performance bulk thermoelectrics
Pei, Y., Shi, X., LaLonde, A., Wang, H., Chen, L., & Snyder, G. J. (2011) · Nature · doi:10.1038/nature09996 · Cited by 4,263
Enhancement of Thermoelectric Efficiency in PbTe by Distortion of the Electronic Density of States
Heremans, J. P., Jovovic, V., Toberer, E. S., Saramat, A., Kurosaki, K., Charoenphakdee, A., Yamanaka, S., & Snyder, G. J. (2008) · Science · doi:10.1126/science.1159725 · Cited by 4,161
Advances in thermoelectric materials research: Looking back and moving forward
He, J., & Tritt, T. M. (2017) · Science · doi:10.1126/science.aak9997 · Cited by 2,767
Self-citationCopper ion liquid-like thermoelectrics
Liu, H., Shi, X., Xu, F., Zhang, L., Zhang, W., Chen, L., Li, Q., Uher, C., Day, T., & Snyder, G. J. (2012) · Nature Materials · doi:10.1038/nmat3273 · Cited by 2,118
Dense dislocation arrays embedded in grain boundaries for high-performance bulk thermoelectrics
Kim, S. I., Lee, K. H., Mun, H. A., Kim, H. S., Hwang, S. W., Roh, J. W., Yang, D. J., Shin, W. H., Li, X. S., Lee, Y. H., et al. (2015) · Science · doi:10.1126/science.aaa4166 · Cited by 2,084
Characterization of Lorenz number with Seebeck coefficient measurement
Kim, H.-S., Gibbs, Z. M., Tang, Y., Wang, H., & Snyder, G. J. (2015) · APL Materials · doi:10.1063/1.4908244 · Cited by 1,969
Compromise and Synergy in High‐Efficiency Thermoelectric Materials
Zhu, T., Liu, Y., Fu, C., Heremans, J. P., Snyder, J. G., & Zhao, X. (2017) · Advanced Materials · doi:10.1002/adma.201605884 · Cited by 1,616
Shi, X., Yang, J., Salvador, J. R., Chi, M., Cho, J. Y., Wang, H., Bai, S., Yang, J., Zhang, W., & Chen, L. (2011) · Journal of the American Chemical Society · doi:10.1021/ja111199y · Cited by 1,478
Topological crystalline insulators in the SnTe material class
Hsieh, T. H., Lin, H., Liu, J., Duan, W., Bansil, A., & Fu, L. (2012) · Nature Communications · doi:10.1038/ncomms1969 · Cited by 1,449
Accelerated exploration of multi-principal element alloys with solid solution phases
Senkov, O. N., Miller, J. D., Miracle, D. B., & Woodward, C. (2015) · Nature Communications · doi:10.1038/ncomms7529 · Cited by 871
High thermoelectric performance by resonant dopant indium in nanostructured SnTe
Zhang, Q., Liao, B., Lan, Y., Lukas, K., Liu, W., Esfarjani, K., Opeil, C., Broido, D., Chen, G., & Ren, Z. (2013) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1305735110 · Cited by 789
Zhao, L. D., Wu, H. J., Hao, S. Q., Wu, C. I., Zhou, X. Y., Biswas, K., He, J. Q., Hogan, T. P., Uher, C., Wolverton, C., et al. (2013) · Energy & Environmental Science · doi:10.1039/c3ee42187b · Cited by 767
Self-citationTan, G., Zhao, L.-D., Shi, F., Doak, J. W., Lo, S.-H., Sun, H., Wolverton, C., Dravid, V. P., Uher, C., & Kanatzidis, M. G. (2014) · Journal of the American Chemical Society · doi:10.1021/ja500860m · Cited by 706
Broad temperature plateau for thermoelectric figure of merit ZT>2 in phase-separated PbTe0.7S0.3
Wu, H. J., Zhao, L.-D., Zheng, F. S., Wu, D., Pei, Y. L., Tong, X., Kanatzidis, M. G., & He, J. Q. (2014) · Nature Communications · doi:10.1038/ncomms5515 · Cited by 557
Self-citationTan, G., Shi, F., Hao, S., Chi, H., Zhao, L.-D., Uher, C., Wolverton, C., Dravid, V. P., & Kanatzidis, M. G. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b00837 · Cited by 502
Hu, L., Wu, H., Zhu, T., Fu, C., He, J., Ying, P., & Zhao, X. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500411 · Cited by 492
Self-citationLi, W., Zheng, L., Ge, B., Lin, S., Zhang, X., Chen, Z., Chang, Y., & Pei, Y. (2017) · Advanced Materials · doi:10.1002/adma.201605887 · Cited by 432
Eco‐Friendly SnTe Thermoelectric Materials: Progress and Future Challenges
Moshwan, R., Yang, L., Zou, J., & Chen, Z. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201703278 · Cited by 424
Extraordinary role of Hg in enhancing the thermoelectric performance of p-type SnTe
Tan, G., Shi, F., Doak, J. W., Sun, H., Zhao, L.-D., Wang, P., Uher, C., Wolverton, C., Dravid, V. P., & Kanatzidis, M. G. (2015) · Energy & Environmental Science · doi:10.1039/c4ee01463d · Cited by 401
Entropy as a Gene‐Like Performance Indicator Promoting Thermoelectric Materials
Liu, R., Chen, H., Zhao, K., Qin, Y., Jiang, B., Zhang, T., Sha, G., Shi, X., Uher, C., Zhang, W., et al. (2017) · Advanced Materials · doi:10.1002/adma.201702712 · Cited by 348
Wu, H., Chang, C., Feng, D., Xiao, Y., Zhang, X., Pei, Y., Zheng, L., Wu, D., Gong, S., Chen, Y., et al. (2015) · Energy & Environmental Science · doi:10.1039/c5ee02423d · Cited by 325
Self-citationRational Design of Advanced Thermoelectric Materials
Yang, J., Yip, H., & Jen, A. K. ‐. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201200514 · Cited by 315
Banik, A., Vishal, B., Perumal, S., Datta, R., & Biswas, K. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00728g · Cited by 296
High Thermoelectric Figure of Merit in PbTe Alloys Demonstrated in PbTe–CdTe
Pei, Y., LaLonde, A. D., Heinz, N. A., & Snyder, G. J. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201100770 · Cited by 289
Optimization of thermoelectric efficiency in SnTe: the case for the light band
Zhou, M., Gibbs, Z. M., Wang, H., Han, Y., Xin, C., Li, L., & Snyder, G. J. (2014) · Phys. Chem. Chem. Phys. · doi:10.1039/c4cp02091j · Cited by 270
Band and scattering tuning for high performance thermoelectric Sn1−xMnxTe alloys
Li, W., Chen, Z., Lin, S., Chang, Y., Ge, B., Chen, Y., & Pei, Y. (2015) · Journal of Materiomics · doi:10.1016/j.jmat.2015.09.001 · Cited by 223
Thermoelectric Transport in Cu7PSe6 with High Copper Ionic Mobility
Weldert, K. S., Zeier, W. G., Day, T. W., Panthöfer, M., Snyder, G. J., & Tremel, W. (2014) · Journal of the American Chemical Society · doi:10.1021/ja5056092 · Cited by 205
Multiple effects of Bi doping in enhancing the thermoelectric properties of SnTe
Zhou, Z., Yang, J., Jiang, Q., Luo, Y., Zhang, D., Ren, Y., He, X., & Xin, J. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta04240f · Cited by 169
High-entropy alloys as high-temperature thermoelectric materials
Shafeie, S., Guo, S., Hu, Q., Fahlquist, H., Erhart, P., & Palmqvist, A. (2015) · Journal of Applied Physics · doi:10.1063/1.4935489 · Cited by 162
Thermoelectric high-entropy alloys with low lattice thermal conductivity
Fan, Z., Wang, H., Wu, Y., Liu, X., & Lü, Z. (2016) · RSC Advances · doi:10.1039/c5ra28088e · Cited by 152
Wang, N., West, D. J., Liu, J., Li, J. Z., Yan, Q., Gu, B.-L., Zhang, S., & Duan, W. (2014) · Physical Review B · doi:10.1103/physrevb.89.045142 · Cited by 124
Self-citationLi, D., Zhao, H., Li, S., Wei, B., Shuai, J., Shi, C., Xi, X., Sun, P., Meng, S., Gu, L., et al. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201503022 · Cited by 99
Acharya, S., Anwar, S., Mori, T., & Soni, A. (2018) · Journal of Materials Chemistry C · doi:10.1039/c8tc00788h · Cited by 67
Cited by
Advanced Thermoelectric Design: From Materials and Structures to Devices
Shi, X.-L., Zou, J., & Chen, Z.-G. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00026 · Cited by 2,524
High-entropy-stabilized chalcogenides with high thermoelectric performance
Jiang, B., Yu, Y., Cui, J., Liu, X., Xie, L., Liao, J., Zhang, Q., Huang, Y., Ning, S., Jia, B., et al. (2021) · Science · doi:10.1126/science.abe1292 · Cited by 1,173
Self-citationHigh-entropy ceramics: Present status, challenges, and a look forward
Xiang, H., Xing, Y., Dai, F.-Z., Wang, H., Su, L., Miao, L., Zhang, G., Wang, Y., Qi, X., Yao, L., et al. (2021) · Journal of Advanced Ceramics · doi:10.1007/s40145-021-0477-y · Cited by 1,109
Self-citationReview of high entropy ceramics: design, synthesis, structure and properties
Zhang, R.-Z., & Reece, M. J. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta05698j · Cited by 760
High figure-of-merit and power generation in high-entropy GeTe-based thermoelectrics
Jiang, B., Wang, W., Liu, S., Wang, Y., Wang, C., Chen, Y., Xie, L., Huang, M., & He, J. (2022) · Science · doi:10.1126/science.abq5815 · Cited by 729
Self-citation
Metadata
- Authors
- Hu, L., Zhang, Y., Wu, H., Li, J., Li, Y., Mckenna, M., He, J., Liu, F., Pennycook, S. J., & Zeng, X.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2018-09-10
- Volume
- 8
- Issue
- 29
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2892093022
- Cited by
- 266
- References
- 37
- FWCI
- 7.86
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.