The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Osmotic Pumping and Salt Rejection by Polyelectrolyte Hydrogel for Continuous Solar Desalination
Abstract
Efficient mass transport and selective salt rejection are highly desirable for solar or thermally driven seawater desalination, but its realization is challenging. Here a new liquid supply mechanism is proposed, i.e., ionic pumping effect, using a polyelectrolyte hydrogel foam (PHF), demonstrated with poly(sodium acrylate) [P(SA)] embedded in a microporous carbon foam (CF). The PHF simultaneously possesses high osmotic pressure for liquid transport and a strong salt‐rejection effect. The PHF is able to sustain high flux of ≈24 L per m 2 per hour (LMH), comparable to the evaporative flux under 15 suns, and a salt rejection ratio over 80%. Compared to the porous carbon foam without the polyelectrolyte hydrogel, i.e., with only the capillary pumping effect, the PHF yields a 42.4% higher evaporative flux, at ≈1.6 LMH with DI water and ≈1.3 LMH with simulated seawater under one‐sun condition due to the more efficient ionic liquid pumping. More importantly, thanks to the strong salt‐rejection effect, the PHF shows a continuous and stable solar‐driven desalination flux of ≈1.3 LMH under one‐sun over 72 h, which has not been achieved before. The successful demonstration of both efficient ionic pumping and strong salt rejection effects makes the PHF an attractive platform for sustainable solar‐driven desalination.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Solar steam generation by heat localization
Ghasemi, H., Ni, G., Marconnet, A. M., Loomis, J., Yerci, S., Miljkovic, N., & Chen, G. (2014) · Nature Communications · doi:10.1038/ncomms5449 · Cited by 2,333
Highly efficient solar vapour generation via hierarchically nanostructured gels
Zhao, F., Zhou, X., Shi, Y., Qian, X., Alexander, M., Zhao, X., Mendez, S., Yang, R., Qu, L., & Yu, G. (2018) · Nature Nanotechnology · doi:10.1038/s41565-018-0097-z · Cited by 2,089
Self-citation
Cited by
Hydrogels and Hydrogel-Derived Materials for Energy and Water Sustainability
Guo, Y., Bae, J., Fang, Z., Li, P., Zhao, F., & Yu, G. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00345 · Cited by 1,395
Zhang, Y., Xiong, T., Nandakumar, D. K., & Tan, S. C. (2020) · Advanced Science · doi:10.1002/advs.201903478 · Cited by 414
Salt Mitigation Strategies of Solar‐Driven Interfacial Desalination
Xu, K., Wang, C., Li, Z., Wu, S., & Wang, J. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202007855 · Cited by 388
Highly efficient and salt rejecting solar evaporation via a wick-free confined water layer
Zhang, L., Li, X., Zhong, Y., Leroy, A., Xu, Z., Zhao, L., & Wang, E. N. (2022) · Nature Communications · doi:10.1038/s41467-022-28457-8 · Cited by 351
Passive, high-efficiency thermally-localized solar desalination
Zhang, L., Xu, Z., Zhao, L., Bhatia, B., Zhong, Y., Gong, S., & Wang, E. N. (2021) · Energy & Environmental Science · doi:10.1039/d0ee03991h · Cited by 337
Metadata
- Authors
- Zeng, J., Wang, Q., Shi, Y., Liu, P., & Chen, R.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2019-08-25
- Volume
- 9
- Issue
- 38
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2970318461
- Cited by
- 213
- References
- 2
- FWCI
- 4.33
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.