The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
On the Functionality of Coatings for Cathode Active Materials in Thiophosphate‐Based All‐Solid‐State Batteries
Abstract
The last decade has seen considerable advancements in the development of solid electrolytes for solid‐state battery applications, with particular attention being paid to sulfide superionic conductors. Importantly, the intrinsic electrochemical instability of these high‐performance separators highlights the notion that further progress in the field of solid‐state batteries is contingent on the optimization of component material interfaces in order to secure high energy and power densities, while maintaining device safety and a practical cycle life. On the cathode side, the need for a protective coating to inhibit solid electrolyte degradation is clear; however, a mechanistic understanding of the coating functionality remains unresolved, and there is still much room for improvement regarding the methodology and associated material properties. Herein, the essential requirements for a suitable coating are specified and fundamental considerations are discussed in detail. Additionally, this article will provide an overview of the various material classes, assessment protocols and practical coating methods, as well as an outlook on the development of coatings for cathode active materials in thiophosphate‐based solid‐state batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A solid future for battery development
Janek, J., & Zeier, W. G. (2016) · Nature Energy · doi:10.1038/nenergy.2016.141 · Cited by 3,979
Self-citationInterface Stability in Solid-State Batteries
Richards, W. D., Miara, L. J., Wang, Y., Kim, J. C., & Ceder, G. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b04082 · Cited by 1,652
Cited by
Tian, Y., Zeng, G., Rutt, A., Shi, T., Kim, H., Wang, J., Koettgen, J., Sun, Y., Ouyang, B., Chen, T., et al. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00767 · Cited by 1,614
Progress and perspectives on halide lithium conductors for all-solid-state lithium batteries
Li, X., Liang, J., Yang, X., Adair, K. R., Wang, C., Zhao, F., & Sun, X. (2020) · Energy & Environmental Science · doi:10.1039/c9ee03828k · Cited by 755
Wang, C., Liang, J., Zhao, Y., Zheng, M., Li, X., & Sun, X. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00551k · Cited by 489
Valuation of Surface Coatings in High-Energy Density Lithium-ion Battery Cathode Materials
Nisar, U., Muralidharan, N., Essehli, R., Amin, R., & Belharouak, I. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2021.03.015 · Cited by 428
Riegger, L. M., Schlem, R., Sann, J., Zeier, W. G., & Janek, J. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202015238 · Cited by 344
Self-citation
Metadata
- Authors
- Culver, S. P., Koerver, R., Zeier, W. G., & Janek, J.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2019-05-08
- Volume
- 9
- Issue
- 24
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2944326309
- Cited by
- 342
- References
- 2
- FWCI
- 13.57
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: On the Functionality of Coatings for Cathode Active Materials in Thiophosphate‐Based All‐Solid‐State Batteries. https://app.cochat.ai/papers/10.1002/aenm.201900626
- The paper
- Culver, S. P., Koerver, R., Zeier, W. G., & Janek, J. (2019). On the Functionality of Coatings for Cathode Active Materials in Thiophosphate‐Based All‐Solid‐State Batteries. Advanced Energy Materials. https://doi.org/10.1002/aenm.201900626
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.