The DOI matches its Crossref record; 74 of the 74 references it cites were found in a registry or an index.
On the Functionality of Coatings for Cathode Active Materials in Thiophosphate‐Based All‐Solid‐State Batteries
Abstract
The last decade has seen considerable advancements in the development of solid electrolytes for solid‐state battery applications, with particular attention being paid to sulfide superionic conductors. Importantly, the intrinsic electrochemical instability of these high‐performance separators highlights the notion that further progress in the field of solid‐state batteries is contingent on the optimization of component material interfaces in order to secure high energy and power densities, while maintaining device safety and a practical cycle life. On the cathode side, the need for a protective coating to inhibit solid electrolyte degradation is clear; however, a mechanistic understanding of the coating functionality remains unresolved, and there is still much room for improvement regarding the methodology and associated material properties. Herein, the essential requirements for a suitable coating are specified and fundamental considerations are discussed in detail. Additionally, this article will provide an overview of the various material classes, assessment protocols and practical coating methods, as well as an outlook on the development of coatings for cathode active materials in thiophosphate‐based solid‐state batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Lithium battery chemistries enabled by solid-state electrolytes
Manthiram, A., Yu, X., & Wang, S. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.103 · Cited by 4,689
A solid future for battery development
Janek, J., & Zeier, W. G. (2016) · Nature Energy · doi:10.1038/nenergy.2016.141 · Cited by 3,979
Self-citationHigh-power all-solid-state batteries using sulfide superionic conductors
Kato, Y., Hori, S., Saito, T., Suzuki, K., Hirayama, M., Mitsui, A., Yonemura, M., Iba, H., & Kanno, R. (2016) · Nature Energy · doi:10.1038/nenergy.2016.30 · Cited by 3,517
Bachman, J. C., Muy, S., Grimaud, A., Chang, H.-H., Pour, N., Lux, S. F., Paschos, O., Maglia, F., Lupart, S., Lamp, P., et al. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00563 · Cited by 2,537
Zhu, Y., He, X., & Mo, Y. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b07517 · Cited by 1,936
Interface Stability in Solid-State Batteries
Richards, W. D., Miara, L. J., Wang, Y., Kim, J. C., & Ceder, G. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b04082 · Cited by 1,652
Design principles for solid-state lithium superionic conductors
Wang, Y., Richards, W. D., Ong, S. P., Miara, L. J., Kim, J. C., Mo, Y., & Ceder, G. (2015) · Nature Materials · doi:10.1038/nmat4369 · Cited by 1,485
Automotive Li-Ion Batteries: Current Status and Future Perspectives
Ding, Y., Cano, Z. P., Yu, A., Lu, J., & Chen, Z. (2019) · Electrochemical Energy Reviews · doi:10.1007/s41918-018-0022-z · Cited by 1,370
New horizons for inorganic solid state ion conductors
Zhang, Z., Shao, Y., Lotsch, B., Hu, Y.-S., Li, H., Janek, J., Nazar, L. F., Nan, C.-W., Maier, J., Armand, M., et al. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01053f · Cited by 1,321
Self-citationAsano, T., Sakai, A., Ouchi, S., Sakaida, M., Miyazaki, A., & Hasegawa, S. (2018) · Advanced Materials · doi:10.1002/adma.201803075 · Cited by 1,275
Inorganic solid Li ion conductors: An overview
Knauth, P. (2009) · Solid State Ionics · doi:10.1016/j.ssi.2009.03.022 · Cited by 1,170
Jung, S., Gwon, H., Hong, J., Park, K., Seo, D., Kim, H., Hyun, J., Yang, W., & Kang, K. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201300787 · Cited by 1,124
Mechanism of Lithium Metal Penetration through Inorganic Solid Electrolytes
Porz, L., Swamy, T., Sheldon, B. W., Rettenwander, D., Frömling, T., Thaman, H. L., Berendts, S., Uecker, R., Carter, W. C., & Chiang, Y. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201701003 · Cited by 1,117
Progress and prospective of solid-state lithium batteries
Takada, K. (2013) · Acta Materialia · doi:10.1016/j.actamat.2012.10.034 · Cited by 1,056
Sulfide Solid Electrolyte with Favorable Mechanical Property for All-Solid-State Lithium Battery
Sakuda, A., Hayashi, A., & Tatsumisago, M. (2013) · Scientific Reports · doi:10.1038/srep02261 · Cited by 1,051
All solid-state polymer electrolytes for high-performance lithium ion batteries
Yue, L., Ma, J., Zhang, J., Zhao, J., Dong, S., Liu, Z., Cui, G., & Chen, L. (2016) · Energy Storage Materials · doi:10.1016/j.ensm.2016.07.003 · Cited by 1,020
Koerver, R., Aygün, I., Leichtweiß, T., Dietrich, C., Zhang, W., Binder, J. O., Hartmann, P., Zeier, W. G., & Janek, J. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00931 · Cited by 1,020
Self-citationOhta, N., Takada, K., Zhang, L., Ma, R., Osada, M., & Sasaki, T. (2006) · Advanced Materials · doi:10.1002/adma.200502604 · Cited by 899
Koerver, R., Zhang, W., de Biasi, L., Schweidler, S., Kondrakov, A. O., Kolling, S., Brezesinski, T., Hartmann, P., Zeier, W. G., & Janek, J. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00907d · Cited by 872
Self-citationInterfaces in Solid-State Lithium Batteries
Xu, L., Tang, S., Cheng, Y., Wang, K., Liang, J., Liu, C., Cao, Y.-C., Wei, F., & Mai, L. (2018) · Joule · doi:10.1016/j.joule.2018.07.009 · Cited by 702
Kondrakov, A. O., Schmidt, A., Xu, J., Geßwein, H., Mönig, R., Hartmann, P., Sommer, H., Brezesinski, T., & Janek, J. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.6b12885 · Cited by 701
Self-citationChen, S., Xie, D., Liu, G., Mwizerwa, J. P., Zhang, Q., Zhao, Y., Xu, X., & Yao, X. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2018.02.020 · Cited by 696
Role of surface coating on cathode materials for lithium-ion batteries
Chen, Z., Qin, Y., Amine, K., & Sun, Y.-K. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm00154f · Cited by 672
Sakuda, A., Hayashi, A., & Tatsumisago, M. (2010) · Chemistry of Materials · doi:10.1021/cm901819c · Cited by 651
Auvergniot, J., Cassel, A., Ledeuil, J.-B., Viallet, V., Seznec, V., & Dedryvère, R. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b04990 · Cited by 644
Haruyama, J., Sodeyama, K., Han, L., Takada, K., & Tateyama, Y. (2014) · Chemistry of Materials · doi:10.1021/cm5016959 · Cited by 605
Park, K. H., Bai, Q., Kim, D. H., Oh, D. Y., Zhu, Y., Mo, Y., & Jung, Y. S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800035 · Cited by 589
Zhang, W., Weber, D. A., Weigand, H., Arlt, T., Manke, I., Schröder, D., Koerver, R., Leichtweiss, T., Hartmann, P., Zeier, W. G., et al. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b01137 · Cited by 538
Self-citationCharging up Stationary Energy Storage
Sutherland, B. R. (2019) · Joule · doi:10.1016/j.joule.2018.12.022 · Cited by 517
Kraft, M. A., Ohno, S., Zinkevich, T., Koerver, R., Culver, S. P., Fuchs, T., Senyshyn, A., Indris, S., Morgan, B. J., & Zeier, W. G. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b10282 · Cited by 509
Self-citationZhang, X., Belharouak, I., Li, L., Lei, Y., Elam, J. W., Nie, A., Chen, X., Yassar, R. S., & Axelbaum, R. L. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201300269 · Cited by 495
Hausbrand, R., Cherkashinin, G., Ehrenberg, H., Gröting, M., Albe, K., Hess, C., & Jaegermann, W. (2015) · Materials Science and Engineering: B · doi:10.1016/j.mseb.2014.11.014 · Cited by 478
Interfacial Challenges in Solid-State Li Ion Batteries
Luntz, A. C., Voss, J., & Reuter, K. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b02352 · Cited by 461
Interfacial modification for high-power solid-state lithium batteries
Takada, K., Ohta, N., Zhang, L., Fukuda, K., Sakaguchi, I., Ma, R., Osada, M., & Sasaki, T. (2008) · Solid State Ionics · doi:10.1016/j.ssi.2008.02.017 · Cited by 376
Zhang, W., Schröder, D., Arlt, T., Manke, I., Koerver, R., Pinedo, R., Weber, D. A., Sann, J., Zeier, W. G., & Janek, J. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta02730c · Cited by 348
Self-citationInterfacial Chemistry in Solid-State Batteries: Formation of Interphase and Its Consequences
Wang, S., Xu, H., Li, W., Dolocan, A., & Manthiram, A. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.7b09531 · Cited by 342
Impact of Cathode Material Particle Size on the Capacity of Bulk-Type All-Solid-State Batteries
Strauss, F., Bartsch, T., de Biasi, L., Kim, A.-Y., Janek, J., Hartmann, P., & Brezesinski, T. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b00275 · Cited by 334
Self-citationZhang, W., Richter, F. H., Culver, S. P., Leichtweiss, T., Lozano, J. G., Dietrich, C., Bruce, P. G., Zeier, W. G., & Janek, J. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b05132 · Cited by 334
Self-citationSolution‐Processable Glass LiI‐Li4SnS4 Superionic Conductors for All‐Solid‐State Li‐Ion Batteries
Park, K. H., Oh, D. Y., Choi, Y. E., Nam, Y. J., Han, L., Kim, J., Xin, H. L., Lin, F., Oh, S. M., & Jung, Y. S. (2015) · Advanced Materials · doi:10.1002/adma.201505008 · Cited by 321
Recent progress of glass and glass-ceramics as solid electrolytes for lithium secondary batteries
Minami, T., Hayashi, A., & Tatsumisago, M. (2006) · Solid State Ionics · doi:10.1016/j.ssi.2006.07.017 · Cited by 303
Shi, S., Qi, Y., Li, H., & Hector, L. G. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp310591u · Cited by 294
Choi, J., & Manthiram, A. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1954927 · Cited by 291
Wang, X., & Yushin, G. (2015) · Energy & Environmental Science · doi:10.1039/c5ee01254f · Cited by 289
Zhao, Y., Zheng, K., & Sun, X. (2018) · Joule · doi:10.1016/j.joule.2018.11.012 · Cited by 288
Redox-active cathode interphases in solid-state batteries
Koerver, R., Walther, F., Aygün, I., Sann, J., Dietrich, C., Zeier, W. G., & Janek, J. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta07641j · Cited by 287
Self-citationDiffusion and ionic conduction in nanocrystalline ceramics
Heitjans, P., & Indris, S. (2003) · Journal of Physics: Condensed Matter · doi:10.1088/0953-8984/15/30/202 · Cited by 286
Progress in solid electrolytes toward realizing solid-state lithium batteries
Takada, K. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.05.003 · Cited by 279
Oh, G., Hirayama, M., Kwon, O., Suzuki, K., & Kanno, R. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b04940 · Cited by 278
Chen, Z., & Dahn, J. R. (2002) · Electrochemical and Solid-State Letters · doi:10.1149/1.1503202 · Cited by 276
de Klerk, N. J. J., van der Maas, E., & Wagemaker, M. (2018) · ACS Applied Energy Materials · doi:10.1021/acsaem.8b00457 · Cited by 269
Materials for Rechargeable Lithium-Ion Batteries
Hayner, C. M., Zhao, X., & Kung, H. H. (2012) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-062011-081024 · Cited by 263
Mohanty, D., Dahlberg, K., King, D. M., David, L. A., Sefat, A. S., Wood, D. L., Daniel, C., Dhar, S., Mahajan, V., Lee, M., et al. (2016) · Scientific Reports · doi:10.1038/srep26532 · Cited by 242
All-Solid-State Batteries with Thick Electrode Configurations
Kato, Y., Shiotani, S., Morita, K., Suzuki, K., Hirayama, M., & Kanno, R. (2018) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.7b02880 · Cited by 234
Li3BO3–Li2CO3: Rationally Designed Buffering Phase for Sulfide All-Solid-State Li-Ion Batteries
Jung, S. H., Oh, K., Nam, Y. J., Oh, D. Y., Brüner, P., Kang, K., & Jung, Y. S. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b03321 · Cited by 233
Ionic conductivity of quenched alkali niobate and tantalate glasses
Glass, A. M., Nassau, K., & Negran, T. J. (1978) · Journal of Applied Physics · doi:10.1063/1.325509 · Cited by 232
Zhang, J., Zhong, H., Zheng, C., Xia, Y., Liang, C., Huang, H., Gan, Y., Tao, X., & Zhang, W. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.04.069 · Cited by 224
Woo, J. H., Trevey, J. E., Cavanagh, A. S., Choi, Y. S., Kim, S. C., George, S. M., Oh, K. H., & Lee, S.-H. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.085207jes · Cited by 222
Interfacial phenomena in solid-state lithium battery with sulfide solid electrolyte
Takada, K., Ohta, N., Zhang, L., Xu, X., Hang, B. T., Ohnishi, T., Osada, M., & Sasaki, T. (2012) · Solid State Ionics · doi:10.1016/j.ssi.2012.01.009 · Cited by 202
Progress and prospect on failure mechanisms of solid-state lithium batteries
Ma, J., Chen, B., Wang, L., & Cui, G. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.04.055 · Cited by 193
Culver, S. P., Koerver, R., Krauskopf, T., & Zeier, W. G. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b01293 · Cited by 171
Self-citationSeino, Y., Ota, T., & Takada, K. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.03.090 · Cited by 166
Gas Evolution in All-Solid-State Battery Cells
Bartsch, T., Strauss, F., Hatsukade, T., Schiele, A., Kim, A., Hartmann, P., Janek, J., & Brezesinski, T. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b01457 · Cited by 159
Self-citationHaruyama, J., Sodeyama, K., & Tateyama, Y. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b08435 · Cited by 153
Discharge Performance of All-Solid-State Battery Using a Lithium Superionic Conductor Li10GeP2S12
Kato, Y., Kawamoto, K., Hirayama, M., & Hirayama, M. (2012) · Electrochemistry · doi:10.5796/electrochemistry.80.749 · Cited by 140
Park, J. S., Mane, A. U., Elam, J. W., & Croy, J. R. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b00603 · Cited by 131
Visbal, H., Aihara, Y., Ito, S., Watanabe, T., Park, Y., & Doo, S. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.02.088 · Cited by 127
Thermodynamic Aspects of Cathode Coatings for Lithium‐Ion Batteries
Aykol, M., Kirklin, S. J., & Wolverton, C. M. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201400690 · Cited by 113
Choi, Y. E., Park, K. H., Kim, D. H., Oh, D. Y., Kwak, H. R., Lee, Y.-G., & Jung, Y. S. (2017) · ChemSusChem · doi:10.1002/cssc.201700409 · Cited by 110
Neudeck, S., Strauss, F., García, G., Wolf, H., Janek, J., Hartmann, P., & Brezesinski, T. (2019) · Chemical Communications · doi:10.1039/c8cc09618j · Cited by 98
Self-citationSakurai, Y., Sakuda, A., Hayashi, A., & Tatsumisago, M. (2011) · Solid State Ionics · doi:10.1016/j.ssi.2010.12.001 · Cited by 82
Jena, A., Meesala, Y., Hu, S., Chang, H., & Liu, R. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b01564 · Cited by 82
Lithium carbonate as a solid electrolyte
Mizusaki, J., Tagawa, H., Saito, K., Uchida, K., & Tezuka, M. (1992) · Solid State Ionics · doi:10.1016/0167-2738(92)90256-o · Cited by 64
Incipient plasticity and surface damage in LiTaO3 and LiNbO3 single crystals
Gruber, M., Leitner, A., Kiener, D., Supancic, P. H., & Bermejo, R. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.04.082 · Cited by 41
Teranishi, T., Yoshikawa, Y., Yoneda, M., Kishimoto, A., Halpin, J., O’Brien, S., Modreanu, M., & Povey, I. M. (2018) · ACS Applied Energy Materials · doi:10.1021/acsaem.8b00496 · Cited by 32
Cited by
Tian, Y., Zeng, G., Rutt, A., Shi, T., Kim, H., Wang, J., Koettgen, J., Sun, Y., Ouyang, B., Chen, T., et al. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00767 · Cited by 1,614
Benchmarking the performance of all-solid-state lithium batteries
Randau, S., Weber, D. A., Kötz, O., Koerver, R., Braun, P., Weber, A., Ivers-Tiffée, E., Adermann, T., Kulisch, J., Zeier, W. G., et al. (2020) · Nature Energy · doi:10.1038/s41560-020-0565-1 · Cited by 1,219
Self-citationTailoring inorganic–polymer composites for the mass production of solid-state batteries
Fan, L.-Z., He, H., & Nan, C.-W. (2021) · Nature Reviews Materials · doi:10.1038/s41578-021-00320-0 · Cited by 1,034
Kim, K. J., Balaish, M., Wadaguchi, M., Kong, L., & Rupp, J. L. M. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202002689 · Cited by 806
Progress and perspectives on halide lithium conductors for all-solid-state lithium batteries
Li, X., Liang, J., Yang, X., Adair, K. R., Wang, C., Zhao, F., & Sun, X. (2020) · Energy & Environmental Science · doi:10.1039/c9ee03828k · Cited by 755
Metadata
- Authors
- Culver, S. P., Koerver, R., Zeier, W. G., & Janek, J.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2019-05-08
- Volume
- 9
- Issue
- 24
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2944326309
- Cited by
- 342
- References
- 74
- FWCI
- 13.57
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.