The DOI matches its Crossref record; 22 of the 22 references it cites were found in a registry or an index.
Revealing the Short‐Circuiting Mechanism of Garnet‐Based Solid‐State Electrolyte
Abstract
Garnet‐type solid‐state electrolytes (SSEs) have been widely studied as a promising candidate for Li metal batteries. Despite the common belief that inorganic SSEs can prevent dendrite propagation, garnet SSEs suffer from relatively low critical current density (CCD) at which the SSEs are abruptly short‐circuited by Li dendrites. In this study, the short‐circuiting mechanism of garnet Li 7 La 2.75 Ca 0.25 Zr 1.75 Nb 0.25 O 12 (LLCZN) is investigated. It is found that instead of propagating uniaxially from one electrode to other in a dendritic form, metallic lithium is formed within the SSE. This can be attributed to the fact that electrons combine with Li ions at the grain boundary, which exhibits relatively high electronic conductivity, and then reduce Li+ to Li 0 to cause short circuits. In order to reduce the electronic conductivity at the grain boundary, a thin layer of LiAlO 2 is coated on the grain surface of LLCZN, which results in an improved CCD value. It is also found that under higher external voltages, the electronic conductivity of SSE becomes more significant, which is believed to be the origin of CCD. These findings not only shed light on the short‐circuiting mechanism of garnet‐type SSEs but also offer a novel perspective and useful guidance on their designs and modifications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Lithium metal anodes for rechargeable batteries
Xu, W., Wang, J., Ding, F., Chen, X., Nasybulin, E., Zhang, Y., & Zhang, J.-G. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee40795k · Cited by 4,704
High-power all-solid-state batteries using sulfide superionic conductors
Kato, Y., Hori, S., Saito, T., Suzuki, K., Hirayama, M., Mitsui, A., Yonemura, M., Iba, H., & Kanno, R. (2016) · Nature Energy · doi:10.1038/nenergy.2016.30 · Cited by 3,517
Fast Lithium Ion Conduction in Garnet‐Type Li7La3Zr2O12
Murugan, R., Thangadurai, V., & Weppner, W. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200701144 · Cited by 3,250
Negating interfacial impedance in garnet-based solid-state Li metal batteries
Han, X., Gong, Y., Fu, K., He, X., Hitz, G. T., Dai, J., Pearse, A., Liu, B., Wang, H., Rubloff, G., et al. (2017) · Nature Materials · doi:10.1038/nmat4821 · Cited by 2,025
Infrared Regulating Smart Window Based on Organic Materials
Khandelwal, H., Schenning, A. P. H. J., & Debije, M. G. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602209 · Cited by 1,027
Cheng, X., Hou, T., Zhang, R., Peng, H., Zhao, C., Huang, J., & Zhang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201506124 · Cited by 994
Intergranular Li metal propagation through polycrystalline Li6.25Al0.25La3Zr2O12 ceramic electrolyte
Cheng, E. J., Sharafi, A., & Sakamoto, J. S. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.12.018 · Cited by 708
High-Performance Anode Materials for Rechargeable Lithium-Ion Batteries
Lu, J., Chen, Z., Pan, F., Cui, Y., & Amine, K. (2018) · Electrochemical Energy Reviews · doi:10.1007/s41918-018-0001-4 · Cited by 695
Self-citationSharafi, A., Meyer, H. M., Nanda, J., Wolfenstine, J., & Sakamoto, J. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.10.053 · Cited by 536
Interfacial Stability of Li Metal–Solid Electrolyte Elucidated via in Situ Electron Microscopy
Ma, C., Cheng, Y., Yin, K., Luo, J., Sharafi, A., Sakamoto, J., Li, J., More, K. L., Dudney, N. J., & Chi, M. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b03223 · Cited by 392
Electrochemical Window of the Li-Ion Solid Electrolyte Li7La3Zr2O12
Thompson, T., Yu, S., Williams, L., Schmidt, R. D., Garcia-Mendez, R., Wolfenstine, J., Allen, J. L., Kioupakis, E., Siegel, D. J., & Sakamoto, J. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00593 · Cited by 391
Aguesse, F., Manalastas, W. W., Buannic, L., del Amo, J. M. L., Singh, G., Llordés, A., & Kilner, J. A. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b13925 · Cited by 386
Nagao, M., Hayashi, A., Tatsumisago, M., Kanetsuku, T., Tsuda, T., & Kuwabata, S. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp51059j · Cited by 299
Garnet Solid Electrolyte Protected Li-Metal Batteries
Liu, B., Gong, Y., Fu, K., Han, X., Yao, Y., Pastel, G., Yang, C., Xie, H., Wachsman, E. D., & Hu, L. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b03887 · Cited by 287
Sharafi, A., Haslam, C. G., Kerns, R. D., Wolfenstine, J., & Sakamoto, J. (2017) · J. Mater. Chem. A · doi:10.1039/c7ta06790a · Cited by 272
Fast Solid-State Li Ion Conducting Garnet-Type Structure Metal Oxides for Energy Storage
Thangadurai, V., Pinzaru, D., Narayanan, S., & Baral, A. K. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/jz501828v · Cited by 249
Tuning mobility and stability of lithium ion conductors based on lattice dynamics
Muy, S., Bachman, J. C., Giordano, L., Chang, H.-H., Abernathy, D. L., Bansal, D., Delaire, O., Hori, S., Kanno, R., Maglia, F., et al. (2018) · Energy & Environmental Science · doi:10.1039/c7ee03364h · Cited by 248
Dual Substitution Strategy to Enhance Li+ Ionic Conductivity in Li7La3Zr2O12 Solid Electrolyte
Buannic, L., Orayech, B., López Del Amo, J.-M., Carrasco, J., Katcho, N. A., Aguesse, F., Manalastas, W., Zhang, W., Kilner, J., & Llordés, A. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b05369 · Cited by 233
Stability of garnet-type Li ion conductors: An overview
Duan, H., Zheng, H., Zhou, Y., Xu, B., & Liu, H. (2017) · Solid State Ionics · doi:10.1016/j.ssi.2017.09.018 · Cited by 115
Self-citationNoda, Y., Nakano, K., Takeda, H., Kotobuki, M., Lü, L., & Nakayama, M. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b01703 · Cited by 94
Ihlefeld, J. F., Clem, P. G., Doyle, B. L., Kotula, P. G., Fenton, K., & Apblett, C. A. (2011) · Advanced Materials · doi:10.1002/adma.201102980 · Cited by 83
Cited by
Designing solid-state electrolytes for safe, energy-dense batteries
Zhao, Q., Stalin, S., Zhao, C.-Z., & Archer, L. A. (2020) · Nature Reviews Materials · doi:10.1038/s41578-019-0165-5 · Cited by 2,372
Self-citationGuidelines and trends for next-generation rechargeable lithium and lithium-ion batteries
Wu, F., Maier, J., & Yu, Y. (2020) · Chemical Society Reviews · doi:10.1039/c7cs00863e · Cited by 2,229
Physicochemical Concepts of the Lithium Metal Anode in Solid-State Batteries
Krauskopf, T., Richter, F. H., Zeier, W. G., & Janek, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00431 · Cited by 892
Lu, Y., Zhao, C., Yuan, H., Cheng, X., Huang, J., & Zhang, Q. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202009925 · Cited by 562
Solid-state lithium batteries: Safety and prospects
Guo, Y., Wu, S., He, Y.-B., Kang, F., Chen, L., Li, H., & Yang, Q.-H. (2022) · eScience · doi:10.1016/j.esci.2022.02.008 · Cited by 507
Metadata
- Authors
- Song, Y., Yang, L., Zhao, W., Wang, Z., Zhao, Y., Wang, Z., Zhao, Q., Liu, H., & Pan, F.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2019-04-08
- Volume
- 9
- Issue
- 21
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2935985330
- Cited by
- 255
- References
- 22
- FWCI
- 12.69
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.