The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
A High‐Performance Monolithic Solid‐State Sodium Battery with Ca2+ Doped Na3Zr2Si2PO12 Electrolyte
Abstract
Solid‐state sodium batteries (SSSBs) are promising electrochemical energy storage devices due to their high energy density, high safety, and abundant resource of sodium. However, low conductivity of solid electrolyte as well as high interfacial resistance between electrolyte and electrodes are two main challenges for practical application. To address these issues, pure phase Na 3 Zr 2 Si 2 PO 12 (NZSP) materials with Ca 2+ substitution for Zr 4+ are synthesized by a sol‐gel method. It shows a high ionic conductivity of more than 10−3 S cm−1 at 25 °C. Moreover, a robust SSSB is developed by integrating sodium metal anodes into NZSP‐type monolithic architecture, forming a 3D electronic and ionic conducting network. The interfacial resistance is remarkably reduced and the monolithic symmetric cell displays stable sodium platting/striping cycles with low polarization for over 600 h. Furthermore, by combining sodium metal anode with Na 3 V 2(PO 4)3 cathode, an SSSB is demonstrated with high rate capability and excellent cyclability. After 450 cycles, the capacity of the cell is still kept at 94.9 mAh g−1 at 1 C. This unique design of monolithic electrolyte architecture provides a promising strategy toward realizing high‐performance SSSBs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Shannon, R. D. (1976) · Acta Crystallographica Section A · doi:10.1107/s0567739476001551 · Cited by 66,145
A profile refinement method for nuclear and magnetic structures
Rietveld, H. M. (1969) · Journal of Applied Crystallography · doi:10.1107/s0021889869006558 · Cited by 17,524
Recent advances in magnetic structure determination by neutron powder diffraction
Rodríguez-Carvajal, J. (1993) · Physica B: Condensed Matter · doi:10.1016/0921-4526(93)90108-i · Cited by 15,608
Sodium-ion batteries: present and future
Hwang, J.-Y., Myung, S.-T., & Sun, Y.-K. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00776g · Cited by 5,305
A cost and resource analysis of sodium-ion batteries
Vaalma, C., Buchholz, D., Weil, M., & Passerini, S. (2018) · Nature Reviews Materials · doi:10.1038/natrevmats.2018.13 · Cited by 2,613
Fast Na+-ion transport in skeleton structures
Goodenough, J. B., Hong, H. Y.-P., & Kafalas, J. A. (1976) · Materials Research Bulletin · doi:10.1016/0025-5408(76)90077-5 · Cited by 2,284
Negating interfacial impedance in garnet-based solid-state Li metal batteries
Han, X., Gong, Y., Fu, K., He, X., Hitz, G. T., Dai, J., Pearse, A., Liu, B., Wang, H., Rubloff, G., et al. (2017) · Nature Materials · doi:10.1038/nmat4821 · Cited by 2,025
Recent advances in all-solid-state rechargeable lithium batteries
Sun, C., Liu, J., Gong, Y., Wilkinson, D. P., & Zhang, J. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.01.028 · Cited by 1,688
Self-citationAdvancing Lithium Metal Batteries
Liu, B., Zhang, J.-G., & Xu, W. (2018) · Joule · doi:10.1016/j.joule.2018.03.008 · Cited by 1,647
Sodium and Sodium‐Ion Batteries: 50 Years of Research
Delmas, C. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703137 · Cited by 1,361
New horizons for inorganic solid state ion conductors
Zhang, Z., Shao, Y., Lotsch, B., Hu, Y.-S., Li, H., Janek, J., Nazar, L. F., Nan, C.-W., Maier, J., Armand, M., et al. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01053f · Cited by 1,321
Jian, Z., Han, W., Lu, X., Yang, H., Hu, Y., Zhou, J., Zhou, Z., Li, J., Chen, W., Chen, D., et al. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201200558 · Cited by 970
Zhao, C., Liu, L., Qi, X., Lu, Y., Wu, F., Zhao, J., Yu, Y., Hu, Y., & Chen, L. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703012 · Cited by 738
Self-citationRecent developments and insights into the understanding of Na metal anodes for Na-metal batteries
Zhao, Y., Adair, K. R., & Sun, X. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01373j · Cited by 533
Rechargeable Sodium All-Solid-State Battery
Zhou, W., Li, Y., Xin, S., & Goodenough, J. B. (2017) · ACS Central Science · doi:10.1021/acscentsci.6b00321 · Cited by 453
Zheng, X., Bommier, C., Luo, W., Jiang, L., Hao, Y., & Huang, Y. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2018.04.014 · Cited by 321
Yang, C., Zhang, L., Liu, B., Xu, S., Hamann, T., McOwen, D., Dai, J., Luo, W., Gong, Y., Wachsman, E. D., et al. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1719758115 · Cited by 303
Guin, M., & Tietz, F. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.09.137 · Cited by 301
3D Wettable Framework for Dendrite‐Free Alkali Metal Anodes
Zhang, Y., Wang, C., Pastel, G., Kuang, Y., Xie, H., Li, Y., Liu, B., Luo, W., Chen, C., & Hu, L. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800635 · Cited by 265
Three-Dimensional, Solid-State Mixed Electron–Ion Conductive Framework for Lithium Metal Anode
Xu, S., McOwen, D. W., Wang, C., Zhang, L., Luo, W., Chen, C., Li, Y., Gong, Y., Dai, J., Kuang, Y., et al. (2018) · Nano Letters · doi:10.1021/acs.nanolett.8b01295 · Cited by 214
3D lithium metal anodes hosted in asymmetric garnet frameworks toward high energy density batteries
Liu, B., Zhang, L., Xu, S., McOwen, D. W., Gong, Y., Yang, C., Pastel, G., Xie, H., Fu, K. K., Dai, J., et al. (2018) · Energy storage materials · doi:10.1016/j.ensm.2018.04.015 · Cited by 147
All-in-one lithium-sulfur battery enabled by a porous-dense-porous garnet architecture
Xu, S., McOwen, D. W., Zhang, L., Hitz, G. T., Wang, C., Ma, Z., Chen, C., Luo, W. H., Dai, J., Kuang, Y., et al. (2018) · Energy storage materials · doi:10.1016/j.ensm.2018.08.009 · Cited by 139
Narayanan, S., Reid, S., Butler, S., & Thangadurai, V. (2018) · Solid State Ionics · doi:10.1016/j.ssi.2018.12.003 · Cited by 124
Zhao, L., Zhao, H., Du, Z., Wang, J., Long, X., Li, Z., & Świerczek, K. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta00869a · Cited by 88
Aragón, M. J., Gutiérrez, J., Klee, R., Lavela, P., Alcántara, R., & Tirado, J. L. (2016) · Journal of Electroanalytical Chemistry · doi:10.1016/j.jelechem.2016.11.064 · Cited by 64
Cited by
Recent Advances in Perovskite‐Type Oxides for Energy Conversion and Storage Applications
Sun, C., Alonso, J. A., & Bian, J. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202000459 · Cited by 634
Self-citationSolid Electrolyte Interphases on Sodium Metal Anodes
Bao, C., Wang, B., Liu, P., Wu, H., Zhou, Y., Wang, D., Liu, H., & Dou, S. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202004891 · Cited by 354
Hao, H., Hutter, T., Boyce, B. L., Watt, J., Liu, P., & Mitlin, D. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00838 · Cited by 314
Huang, J., Wu, K., Xu, G., Wu, M., Dou, S., & Wu, C. (2023) · Chemical Society Reviews · doi:10.1039/d2cs01029a · Cited by 304
An advance review of solid-state battery: Challenges, progress and prospects
Li, C., Wang, Z.-Y., He, Z.-J., Li, Y.-J., Mao, J., Dai, K.-H., Yan, C., & Zheng, J.-C. (2021) · Sustainable Materials and Technologies · doi:10.1016/j.susmat.2021.e00297 · Cited by 273
Self-citation
Metadata
- Authors
- Lu, Y., Alonso, J. A., Yi, Q., Lu, L., Wang, Z. L., & Sun, C.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2019-06-23
- Volume
- 9
- Issue
- 28
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2953832076
- Cited by
- 319
- References
- 25
- FWCI
- 9.87
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.