The DOI matches its Crossref record; 59 of the 59 references it cites were found in a registry or an index.
Biomimetic MXene Textures with Enhanced Light‐to‐Heat Conversion for Solar Steam Generation and Wearable Thermal Management
Abstract
2D materials are of particular interest in light‐to‐heat conversion, yet challenges remain in developing a facile method to suppress their light reflection. Herein, inspired by the black scales of Bitis rhinoceros, a generalized approach via sequential thermal actuations to construct biomimetic 2D‐material nanocoatings, including Ti 3 C 2 Tx MXene, reduced graphene oxide (rGO), and molybdenum disulfide (MoS 2) is designed. The hierarchical MXene nanocoatings result in broadband light absorption (up to 93.2%), theoretically validated by optical modeling and simulations, and realize improved light‐to‐heat performance (equilibrium temperature of 65.4 °C under one‐sun illumination). With efficient light‐to‐heat conversion, the bioinspired MXene nanocoatings are next incorporated into solar steam‐generation devices and stretchable solar/electric dual‐heaters. The MXene steam‐generation devices require much lower solar‐thermal material loading (0.32 mg cm−2) and still guarantee high steam‐generation performance (1.33 kg m−2 h−1) compared with other state‐of‐the‐art devices. Additionally, the mechanically deformed MXene structures enable the fabrication of stretchable and wearable heaters dual‐powered by sunlight and electricity, which are reversibly stretched and heated above 100 °C. This simple fabrication process with effective utilization of active materials promises its practical application value for multiple solar–thermal technologies.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Structural absorption by barbule microstructures of super black bird of paradise feathers
McCoy, D. E., Feo, T., Harvey, T. A., & Prum, R. O. (2018) · Nature Communications · doi:10.1038/s41467-017-02088-w · Cited by 7,424
Guidelines for Synthesis and Processing of Two-Dimensional Titanium Carbide (Ti3C2Tx MXene)
Alhabeb, M., Maleski, K., Anasori, B., Lelyukh, P., Clark, L., Sin, S., & Gogotsi, Y. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b02847 · Cited by 5,045
Metallic 1T phase MoS2 nanosheets as supercapacitor electrode materials
Acerce, M., Voiry, D., & Chhowalla, M. (2015) · Nature Nanotechnology · doi:10.1038/nnano.2015.40 · Cited by 2,797
Solar steam generation by heat localization
Ghasemi, H., Ni, G., Marconnet, A. M., Loomis, J., Yerci, S., Miljkovic, N., & Chen, G. (2014) · Nature Communications · doi:10.1038/ncomms5449 · Cited by 2,333
Flexible and conductive MXene films and nanocomposites with high capacitance
Ling, Z., Ren, C. E., Zhao, M.-Q., Yang, J., Giammarco, J. M., Qiu, J., Barsoum, M. W., & Gogotsi, Y. (2014) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1414215111 · Cited by 2,274
3D self-assembly of aluminium nanoparticles for plasmon-enhanced solar desalination
Zhou, L., Tan, Y., Wang, J., Xu, W., Yuan, Y., Cai, W., Zhu, S., & Zhu, J. (2016) · Nature Photonics · doi:10.1038/nphoton.2016.75 · Cited by 2,148
MXene Ti3C2: An Effective 2D Light-to-Heat Conversion Material
Li, R., Zhang, L., Shi, L., & Wang, P. (2017) · ACS Nano · doi:10.1021/acsnano.6b08415 · Cited by 1,798
Enhanced absorption and carrier collection in Si wire arrays for photovoltaic applications
Kelzenberg, M. D., Boettcher, S. W., Petykiewicz, J. A., Turner-Evans, D. B., Putnam, M. C., Warren, E. L., Spurgeon, J. M., Briggs, R. M., Lewis, N. S., & Atwater, H. A. (2010) · Nature Materials · doi:10.1038/nmat2635 · Cited by 1,333
Self-assembly of highly efficient, broadband plasmonic absorbers for solar steam generation
Zhou, L., Tan, Y., Ji, D., Zhu, B., Zhang, P., Xu, J., Gan, Q., Yu, Z., & Zhu, J. (2016) · Science Advances · doi:10.1126/sciadv.1501227 · Cited by 1,327
Two-Dimensional Ultrathin MXene Ceramic Nanosheets for Photothermal Conversion
Lin, H., Wang, X., Yu, L., Chen, Y., & Shi, J. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b04339 · Cited by 1,314
Cited by
Advanced Textiles for Personal Thermal Management and Energy
Peng, Y., & Cui, Y. (2020) · Joule · doi:10.1016/j.joule.2020.02.011 · Cited by 747
Electronic Textiles for Wearable Point-of-Care Systems
Chen, G., Xiao, X., Zhao, X., Tat, T., Bick, M., & Chen, J. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00502 · Cited by 688
Flexible MXene‐Based Composites for Wearable Devices
Ma, C., Ma, M., Si, C., Ji, X., & Wan, P. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202009524 · Cited by 544
Lu, Y., Fan, D., Wang, Y., Xu, H., Lu, C., & Yang, X. (2021) · ACS Nano · doi:10.1021/acsnano.1c02578 · Cited by 426
Zhang, Y., Xiong, T., Nandakumar, D. K., & Tan, S. C. (2020) · Advanced Science · doi:10.1002/advs.201903478 · Cited by 414
Metadata
- Authors
- Li, K., Chang, T., Li, Z., Yang, H., Fu, F., Li, T., Ho, J. S., & Chen, P.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2019-08
- Volume
- 9
- Issue
- 34
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2966157239
- Cited by
- 329
- References
- 59
- FWCI
- 15.02
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Biomimetic MXene Textures with Enhanced Light‐to‐Heat Conversion for Solar Steam Generation and Wearable Thermal Management. https://app.cochat.ai/papers/10.1002/aenm.201901687
- The paper
- Li, K., Chang, T., Li, Z., Yang, H., Fu, F., Li, T., Ho, J. S., & Chen, P. (2019). Biomimetic MXene Textures with Enhanced Light‐to‐Heat Conversion for Solar Steam Generation and Wearable Thermal Management. Advanced Energy Materials. https://doi.org/10.1002/aenm.201901687
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.